Handleiding Black and Decker IR07XC Strijkijzer

Handleiding

Please Read and Save this Use and Care Book.

IMPORTANT SAFEGUARDS.

When using your iron, basic safety precautions should always be followed,

including the following:

READ ALL INSTRUCTIONS BEFORE USING.

• Only use iron for its intended use.

• To avoid risk of electric shock, do not immerse the iron in water or other liquids.

• Always turn iron off before plugging or unplugging from the electrical

outlet. Never pull on the cord to disconnect the iron from the electrical

outlet; instead, grasp the plug and pull on the plug to disconnect the iron.

• Do not let the cord touch hot surfaces. Let the iron cool completely before

putting the iron away. Coil the cord loosely around the iron when storing.

• Always disconnect the iron from the electrical outlet before filling the iron

with water, emptying the water from the iron, and when the iron is not in use.

• Do not operate the iron with a damaged cord or in the event the iron has

been dropped or damaged. To avoid the risk of electric shock, do not

disassemble the iron. Take it to a qualified serviceman for examination and

repair. Incorrect assembly might result in a risk of electric shock when the

iron is used after reassembly.

• Close supervision is necessary for any appliance used by or near children.

Do not leave the iron unattended while the iron is connected or on an

ironing board.

• Burns can occur from touching hot metal parts, hot water or steam. Use

caution when you turn a steam iron upside down— there might be hot

water in the reservoir.

• This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience

and knowledge, unless they have been given supervision or instruction

concerning use of the appliance by a person responsible for their safety.

• Children should be supervised to ensure that they do not play with the appliance.

• The iron must be used and rested on a stable surface.

• When placing the iron on its stand, ensure that the surface on which the

stand is placed is stable.

• The iron is not to be used if it has been dropped, if there are visible signs of

damage or if it is leaking.

SPECIAL INSTRUCTIONS.

• To avoid a circuit overload, do not operate an iron on the same circuit with

another high wattage appliance.

• If an extension cord is absolutely necessary, a cord with an ampere rating

equal to or greater than the maximum rating of the iron should be used. A

cord rated for less amperage can result in a risk of fire or electric shock

due to overheating. Care shall be taken to arrange the cord so that it cannot

be pulled or be tripped over.

SAVE THESE INSTRUCTIONS.

This product is for household use only.

POLARIZED PLUG (120V MODELS ONLY)

This appliance has a polarized plug (one blade is wider than the other). To

reduce the risk of electric shock, this plug is intended to fit into a polarized

outlet only one way. If the plug does not fit fully into the outlet, reverse the

plug. If it still does not fit, contact a qualified electrician. Do not attempt to

modify the plug in any way.

TAMPER-RESISTANT SCREW

Warning: This appliance is equipped with a tamper-resistant screw to

prevent removal of the outer cover. To reduce the risk of fire or electric shock,

do not attempt to remove the outer cover. There are no user-serviceable parts

inside. Repair should be done only by authorized service personnel.

Note: If the power cord is damaged, it should be replaced by qualified

personnel; in Latin America, by an authorized service center.

HOW TO USE

This product is for household use only.

GETTING STARTED

• Remove any labels, stickers or tags attached to the body or soleplate of the iron.

• Please go to www.prodprotect.com/applica to register your warranty.

Note: Use ordinary tap water for ironing. Do not use water processed through a

home softening system.

Important: For optimum performance, let the iron

stand for 90 seconds before beginning to iron.

FILLING WATER TANK

1. With iron on flat surface with soleplate down, open

water-fill cover (A).

2. Tilt the iron and using a clean measuring cup, pour

water into opened chamber until water reaches the MAX level mark on the side of

the water tank. Do not overfill.

3. Close the water-fill cover.

4. Plug in the iron. The power indicator light illuminates.

Note: If you need to add water while ironing, unplug the iron and follow above steps.

Tip: If unsure of a garment’s fiber, test a small area (on an inside seam or hem)

before ironing.

3-WAY AUTOMATIC SHUTOFF

The automatic shutoff feature in your iron works as follows:

• Once the iron reaches appropriate temperature,

it will turn off after 30 seconds of inactivity if left

on its soleplate or tipped over on its side. If left

vertically on its heel rest, it will shut off after

8 minutes (B).

• The power indicator light starts blinking to let you

know that the iron has stopped heating.

• As soon as you pick up the iron, it will start heating

again. Wait for iron to reheat completely before resuming operation.

SMART STEAM

TM

TECHNOLOGY

The Smart Steam

TM

system automatically produces steam when you turn the

fabric select dial between settings 4 and 6.

SURGE OF STEAM

Horizontal

Tip: Use to remove stubborn creases.

1. With the water tank filled to the MAX mark, set fabric select dial to

appropriate setting (between 4 and 6) for your fabric. See fabric guide on

water tank and read garment’s label to help you determine fabric type.

2. Be sure there is water in the reservoir. Steam is automatically turned off

between settings 0 and 3.

3. For best performance, use surge of steam at 5-second intervals.

4. When finished ironing, turn the fabric select dial to 0 and unplug the iron.

Important: Always stand the iron on its heel rest when powered on but

not in use.

Vertical

Tip: Use for removing wrinkles from hanging clothes and drapes.

1. Be sure the water tank is filled to the MAX mark.

2. Hang the garment to be steamed on a clothes hanger. (Curtains or drapes

can be steamed once they are hung.)

3. Set the fabric select dial to appropriate setting (between 4 and 6) for your fabric.

4. Hold the iron close to, but not touching, the fabric.

5. Pull the fabric tight in your free hand and press the button as you move the

iron over the fabric.

USING SPRAY

Tip: Use to dampen tough wrinkles at any setting.

1. Be sure the iron is filled with water.

2. On first use, pump the button several times.

ANTI DRIP SYSTEM

The anti drip system prevents water spotting at low temperatures.

DRY IRONING

1. Turn the fabric select dial to setting 1, 2, or 3 to iron without steam.

XPRESS STEAM

™

IRON

Product may vary slightly from what is illustrated.

1. Spray nozzle

2. Water-fill cover

3. Fabric select dial

4. Steam button

5. Spray button

6. Power indicator light

7. Handle

8. 360° pivoting cord

9. Slip-resistant heel

10. Fabric guide

11. Translucent water tank

12. Auto Clean

TM

button

13. Soleplate

© 2013 Applica Consumer Products, Inc.

is a registered trademark of The Black & Decker Corporation,

Towson, Maryland, USA

Made and Printed in People’s Republic of China

USA /Canada 1-800-231-9786

Accessories/Parts 1-800-738-0245

Register your product at www.prodprotect.com/applica

R2 2012/5-15-100 E /F

Model: IR05XC, 6XC, 7XC, 8XC

www.prodprotect.com/applica

HOW TO USE (CONT)DRY IRONING

2. To dry iron at higher settings, empty the water from the reservoir to

prevent steaming.

EMPTYING WATER TANK (OPTIONAL)

1. Unplug the iron and let it cool.

2. To release the water, hold the iron over a sink with the tip pointing down

and to one side. Water will empty out of the water-fill opening.

CARE AND CLEANING

This product contains no user serviceable parts. Refer service to qualified service

personnel.

CLEANING OUTSIDE SURFACES

Make sure iron is unplugged and has cooled completely. Wipe the soleplate

and outersurfaces with a soft cloth dampened with water. Add mild household

detergent. Neve ruse abrasives, heavy-duty cleansers, vinegar or scouring

pads that may scratch or discolor the iron. After cleaning, steam iron over an

old cloth to remove any residue from the steam vents.

AUTO CLEAN

TM

SYSTEM

Tip: To keep the steam vents free of any buildup, follow these instructions

about once a month:

1. Fill the water tank well below the MAX line. Plug in the iron.

2. Turn the fabric select dial to 6 and stand the iron on its heel rest. Allow it to heat.

3. Turn fabric select dial to 0, unplug the iron and hold over a sink with the

soleplate facing down.

4. Press and hold the AUTO CLEAN

TM

button. Be careful, as hot water and steam

will come out of the steam vents. Continue to hold the AUTO CLEAN

TM

button until

all the water has emptied. If necessary, rock iron side-to-side and front-to-back.

5. When finished, release the button, stand the iron on its heel rest and plug it

in. Heat for about 2 minutes to dry out any remaining water.

STORING YOUR IRON

1. Unplug the iron and allow it to cool.

2. Check that the selector is set to 0.

3. Store vertically on its heel to prevent water leaking from the soleplate.

NEED HELP?

For service, repair or any questions regarding your appliance, call the

appropriate 800 number on the cover of this book. Do not return the product

to the place of purchase. Also, please Do not mail product back to the

manufacturer, nor bring it to a service center. You may also want to consult

the website listed on the cover of this manual.

Two-Year Limited Warranty

(Applies only in the United States and Canada)

What does it cover?

• Any defect in material or workmanship provided; however, Applica’s liability

will not exceed the purchase price of the product.

For how long?

• Two years from the date of original purchase with proof of such purchase.

What will we do to help you?

• Provide you with a reasonably similar replacement product that is either

new or factory refurbished.

How do you get service?

• Save your receipt as proof of date of sale.

• Check our on-line service site at www.prodprotect.com/applica, or call our

toll-free number, 1-800-231-9786, for general warranty service.

• If you need parts or accessories, please call 1-800-738-0245.

What does your warranty not cover?

• Damage from commercial use

• Damage from misuse, abuse or neglect

• Products that have been modified in any way

• Products used or serviced outside the country of purchase

• Glass parts and other accessory items that are packed with the unit

• Shipping and handling costs associated with the replacement of the unit

• Consequential or incidental damages (Please note, however, that some

states do not allow the exclusion or limitation of consequential or incidental

damages, so this limitation may not apply to you.)

How does state law relate to this warranty?

• This warranty gives you specific legal rights, and you may also have other

rights that vary from state to state or province to province.

A

B

8 minutes

30 seconds

10111213

8

9

1 2 3

4 5 6 7

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Black and Decker IR07XC Strijkijzer. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Black and Decker. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Black and Decker IR07XC Strijkijzer in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Black and Decker Strijkijzers
Meer handleidingen voor Strijkijzers

Veelgestelde vragen over Black and Decker IR07XC Strijkijzer

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Black and Decker ICR2020 Strijkijzer

Handleiding

Black and Decker C520 Strijkijzer

Handleiding

Black and Decker IR1070S Strijkijzer

Handleiding

Black and Decker IR2110 Strijkijzer

Handleiding

Black and Decker F1055 Strijkijzer

Handleiding

Black and Decker F2200 Strijkijzer

Handleiding

Black and Decker F1065 Strijkijzer

Handleiding

Black and Decker SG100 Strijkijzer

Gerelateerde categorieën