Handleiding Black and Decker IR1350S Strijkijzer

Handleiding

Size: 19.685" x 17.5"

Please Read and Save this Use and Care Book.

IMPORTANT SAFETY

INSTRUCTIONS

When using your iron, basic safety precautions should always be

followed, including the following:

❍ READ ALL INSTRUCTIONS BEFORE USING.

❍ Use iron only for its intended use.

❍ To protect against a risk of electric shock, do not immerse the

iron in water or other liquids.

❍ The iron should always be turned to the minimum (min) setting

before plugging or unplugging from outlet. Never yank cord

to disconnect from the outlet; instead grasp plug and pull to

disconnect.

❍ Do not allow cord to touch hot surfaces. Let iron cool completely

before putting away. Loop cord loosely around iron when storing.

❍ Always disconnect iron from electrical outlet when filling with

water or emptying, and when not in use.

❍ Do not operate iron with a damaged cord, or if the iron has been

dropped or damaged. To avoid the risk of electric shock, do not

disassemble the iron; take it to a qualified service person for

examination and repair, or call the appropriate toll-free number

on the cover of this manual. Incorrect reassembly can cause a

risk of electric shock when the iron is used.

❍ Close supervision is necessary for any appliance being used by or

near children. Do not leave iron unattended while connected or

on an ironing board.

❍ Burns can occur from touching hot metal parts, hot water or

steam. Use caution when you turn a steam iron upside down or

use the surge of steam—there may be hot water in the reservoir.

Avoid rapid movement of iron to minimize hot water spillage.

❍

The iron must be used and rested on a stable surface.

- When placing the iron on its stand, ensure that the surface

on which the stand is placed is stable.

- The iron is not to be used if it has been dropped,

if there are visible signs of damage or if it is leaking.

MODEL/MODELO

❍ IR1350S

PROFESSIONAL STEAM IRON

PLANCHA DE VAPOR PROFESIONAL

Product may vary slightly from what is illustrated.

SPECIAL INSTRUCTIONS

❍ To avoid a circuit overload, do not operate another

high-wattage appliance on the same circuit.

❍ If an extension cord is absolutely necessary, a 15-ampere and

120-volt should be used. Cords rated for less amperage may

overheat. Care should be taken to arrange the cord so that it

cannot be pulled or tripped over.

❍ This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental capabilities,

or lack of experience and knowledge, unless they have been

given supervision or instruction concerning use of the appliance

by a person responsible for their safety.

❍ Children should be supervised to ensure that they do not play

with the appliance.

SAVE THESE INSTRUCTIONS.

This product is for household use only.

POLARIZED PLUG

This appliance has a polarized plug (one blade is wider than the

other). To reduce the risk of electric shock, this plug is intended to

fit into a polarized outlet only one way. If the plug does not fit fully

into the outlet, reverse the plug. If it still does not fit, contact a

qualified electrician. Do not attempt to modify the plug in any way.

TAMPER-RESISTANT SCREW

Warning: This appliance is equipped with a tamper-resistant

screw to prevent removal of the outer cover. To reduce the risk of

fire or electric shock, do not attempt to remove the outer cover.

There are no user-serviceable parts inside. Repair should be

done only by authorized service personnel.

Note: If the power supply cord is damaged, it should be replaced

by qualified personnel or in Latin America by an authorized service

center.

How to Use

This product is for household use only.

GETTING STARTED

• Remove any labels, stickers or tags attached to the body or soleplate of the iron.

• Please go to www.prodprotect.com/applica to register your warranty.

Note: Use ordinary tap water for ironing. Do not use water processed through a

home softening system.

Important: For optimum performance, let the iron stand for 90 seconds before

beginning to iron.

Tip: If unsure of a garment’s fiber, test a small area (on an inside seam or hem)

before ironing.

FILLING WATER TANK

1. With iron on a flat surface with soleplate down or tilted at a 45-degree angle, open

the water-fill cover.

2. Using a clean measuring cup, pour water into opening until water reaches the

MAX level mark on the side of the water tank. Do not overfill.

AUTOMATIC SHUTOFF IN 3 POSITIONS

1. The iron will automatically turn to stand by mode after 30 seconds of inactivity if

left on its soleplate or on its side. If left vertically on its heel rest, it will turn off

after 8 minutes.

2. The red power indicator light starts blinking to let you know the iron has stopped

heating.

Important: The iron will have turned off but will still be hot.

3. Once the iron is picked up, an internal motion sensor is activated and the iron

starts heating again.

4. Allow iron to reheat completely before resuming ironing.

SELECTING FABRIC SETTING

1. Read fabric labels to help determine fabric type to be ironed.

2. Once you determine the fabric type, turn the fabric-select dial to select the

appropriate fabric setting.

Important: Always stand the iron on its heel when powered on but not in use.

USING VARIABLE STEAM

Note: Be sure the water tank is filled.

1. This iron produces steam at settings 4 through 6. Turn the fabric-select dial to the

appropriate setting for your fabric.

2. Push the variable steam selector to desired amount of steam. The higher the

setting selected, the more powerful the steam.

Note: For no steam, the variable steam selector should be set to the .

STEAM BUTTON

Note: Be sure the water tank is filled.

1. With the water tank filled to the MAX mark, turn the fabric select dial to

appropriate setting (between 4 and 6) and let iron stand on its heel rest about 90

seconds.

2. Press the steam button to generate a burst of steam. For best performance, leave

an interval of 5 seconds between bursts.

Note: On first use, pump the steam button several times.

HORIZONTAL STEAM IRONING

1. Fill water reservoir to MAX line.

2. Turn the fabric select dial to select desired setting.

3. Set the variable steam selector to desired amount of steam.

4. When finished ironing, turn the fabric-select dial to the lowest setting. Make sure

the variable steam selector is set to dry and unplug the iron.

5. Stand the iron on its heel rest and allow it to cool off.

VERTICAL STEAMING

Use to remove wrinkles or creases from hanging garments or drapes.

1. Turn the fabric-select dial to select desired setting for the fabric to be ironed.

2. Hold iron close to, but not touching fabric.

3. Pull fabric taut with your free hand and press the steam button as you move the

iron over the fabric.

Important: Do not bring iron too close to hand holding fabric to avoid heat.

4. For best performance, leave an interval of 5 seconds between bursts.

SPRAY BUTTON

Note: Be sure the water tank is filled.

1. Press the spray button to generate a spray of water.

Note: On first use, pump the spray button several times.

Important: Do not spray silk.

DRY IRONING

1. Set the variable steam selector to .

2. Turn the fabric-select dial to appropriate setting for your fabric.

3. When finished ironing, make sure to unplug the iron.

Important: Always stand the iron on its heel rest when powered on or not in use.



























1. Spray nozzle

2. Water-fill cover

3. Variable steam selector

4. Steam button

5. Spray button

6. Power indicator light

7. Comfort Grip

TM

handle

8. 360° pivoting cord

9. Heel rest

10. Fabric-select dial

11. Water tank

12. Auto Clean® button

13. Soleplate

Care and Cleaning

This product contains no user serviceable parts. Refer service to qualified service

personnel.

CLEANING

1. Make sure iron is unplugged and has cooled completely. Wipe the soleplate

and outer surfaces with a soft cloth dampened with water and mild household

detergent. Never use abrasives, heavy-duty cleansers, vinegar or scouring pads

that may scratch or discolor the iron.

2. After cleaning, steam iron over an old cloth to remove any residue from the

steam vents.

AUTO CLEAN

TM

SYSTEM

To keep the steam vents free of any buildup, follow these instructions about once a

month.

1. Fill the water tank well below MAX line. Plug in the iron.

2. Select fabric setting 6 on the fabric-select dial and stand the iron on its

heel rest.

3. Wait 2 minutes for the iron to heat fully, then unplug the iron.

4. Hold iron over a sink with the soleplate facing down.

5. Press the Auto Clean

TM

button.

Important: Be careful, as after several seconds, hot water and steam will come

out of the steam vents.

6. Continue to hold Auto Clean

TM

button until all the water has emptied. If

necessary, move iron side-to-side and front-to-back.

7. When finished, release the button, stand the iron on its heel rest and plug

it in. Heat for about 2 minutes to dry out any remaining water.

STORING YOUR IRON

1. Unplug the iron and let it cool completely.

2. Check that the fabric-select dial is set to .

3. Store iron on its heel rest.

When using your iron for the first time,

you may notice water residue inside the

unit. This is normal.

Cuando use su plancha por primera

vez, notará que hay agua adentro de la

plancha. Esto es normal.

Customer Care Line:

USA 1-800-231-9786

Accessories/Parts (USA)

1-800-738-0245

For online customer service

and to register your product, go to

www.prodprotect.com/applica

Servicio para el cliente:

México 01-800 714-2503

Accesorios/Partes (EE.UU)

1-800-738-0245

Para servicio al cliente y para

registrar su garantía, visite

www.prodprotect.com/applica

Made and Printed in People’s Republic of China

Fabricado e Impreso en la República Popular de China

T22-5001304

10892-00 E/S

© 2014 The Black & Decker Corporation and Spectrum Brands, Inc.

Middleton, WI 53562

Por favor llame al número correspondiente que aparece en la lista a continuación

para solicitar que se haga efectiva la garantía y donde Ud. puede solicitar

servicio, reparaciones o partes en el país donde el producto fué comprado.

Sello del Distribuidor:

Fecha de compra:

Modelo:

Código de fecha / Date Code / Le code de date:

320 W 120V~ 60 Hz

Importado por / Imported by:

RAYOVAC ARGENTINA S.R.L.

Humboldt 2495 Piso #3

(C1425FUG) C.A.B.A. Argentina.

C.U.I.T NO. 30-70706168-1

Importado por / Imported by:

Rayovac de México S.A de C.V

Autopista México Querétaro No 3069-C Oficina 004

Colonia San Andrés Atenco, Tlalnepantla

Estado de México, C.P. 54040

Mexico.

Telefono: (55) 5831 – 7070

Para atención de garantía marque: 01 800 714 2503

Comercializado por:

Rayovac de México S.A de C.V

Autopista México Querétaro No 3069-C Oficina 004

Colonia San Andrés Atenco, Tlalnepantla

Estado de México, C.P. 54040

Mexico.

Telefono: (55) 5831 – 7070

Para atención de garantía marque: 01 800 714 2503

Servicio y Reparación

Art. 123 No. 95

Col. Centro, C.P. 06050

Deleg. Cuauhtemoc

Servicio al Consumidor,

Venta de Refacciones y Accesorios

01 800 714 2503

Argentina

Servicio Técnico

Monroe 3351

CABA Argentina

Tel: 0800 – 444 - 7296

servicios@rayovac.com.ar

Argentina

SERVICIO DE MAQUINAS Y

HERRAMIENTAS LTDA.

Portugal Nº 644

Santiago – Chile

Fonos: 02-6355208 / 02-6341169

Email: servicio@spectrumbrands.cl

Call center: 800-171-051

Colombia

Rayovac Varta S.A

Carrera 17 Número 89-40

Línea gratuita nacional

Tel. 018000510012

Costa Rica

Aplicaciones Electromecanicas, S.A.

Calle 26 Bis y Ave. 3

San Jose, Costa Rica

Tel. (506) 257-5716 / 223-0136

administracion@masterecuador.com

Ecuador

SERVICIO MASTER ECUADOR

ALMERIA N50-71 Y DE LOS ALAMOS

Tel. (593) 2281-3882 / 2240-9870

El Salvador

Calle San Antonio Abad 2936

San Salvador, El Salvador

Tel. (503) 2284-8374

Guatemala

MacPartes SA

3ª Calle 414 Zona 9

Frente a Tecun

Tel. (502) 2331-5020 / 2332-2101

Honduras

ServiTotal

Contigua a Telecentro

Tegucigalpa, Honduras,

Tel. (504) 235-6271

México

Articulo 123 # 95 Local 109 y 112

Col. Centro, Cuauhtemoc,

México, D.F.

Tel. 01 800 714 2503

Nicaragua

ServiTotal

De semáforo de portezuelo

500 metros al sur.

Managua, Nicaragua,

Tel. (505) 248-7001

Panamá

Servicios Técnicos CAPRI

Tumbamuerto Boulevard

El Dorado Panamá

500 metros al sur.

Tel. 3020-480-800 sin costo

(507) 2360-236 / 159

Panamá

Servicio Central Fast Service

Av. Angamos Este 2431

San Borja, Lima Perú

Tel. (511) 2251 388

Puerto Rico

Buckeye Service

Jesús P. Piñero #1013

Puerto Nuevo, SJ PR 00920

Tel.: (787) 782-6175

Republica Dominicana

Prolongación Av. Rómulo Betancourt

Zona Industrial de Herrera

Santo Domingo, República Dominicana

Tel.: (809) 530-5409

Venezuela

Inversiones BDR CA

Av. Casanova C.C.

City Market Nivel Plaza Local 153

Diagonal Hotel Melia,

Caracas.

Tel. (582) 324-0969

www.applicaservice.com

ser[email protected]

BLACK+DECKER and the BLACK+DECKER logo are trademarks of

The Black & Decker Corporation and are used under license. All rights

reserved

BLACK+DECKER y el logo tipo BLACK+DECKER son marcas

registradas de The Black & Decker Corporation y son utilizados bajo

licencia. Todos los derechos reservados.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Black and Decker IR1350S Strijkijzer. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Black and Decker. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Black and Decker IR1350S Strijkijzer in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Black and Decker Strijkijzers
Meer handleidingen voor Strijkijzers

Beoordeling

Veelgestelde vragen over Black and Decker IR1350S Strijkijzer

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Black and Decker S600 Strijkijzer

Handleiding

Black and Decker ICR200 Strijkijzer

Handleiding

Black and Decker IR1380S Strijkijzer

Handleiding

Black and Decker X750T Strijkijzer

Handleiding

Black and Decker F611 Strijkijzer

Handleiding

Black and Decker XT2000 Strijkijzer

Handleiding

Black and Decker ICR2010 Strijkijzer

Handleiding

Black and Decker F2200 Strijkijzer

Gerelateerde categorieën