Handleiding Bosch WAQ24478EE Wasmachine

Handleiding

7

Overview of programmes aRefer to the table of consumption values on page 8, and advice and warnings on page 6.

Programmes °C max.

Type of laundry

Additional functions; Information

Algodón/Algodão

(Cottons)

7 - 90 °C

8 kg/

4 kg*

hard-wearing fabrics, cottons or linen that can be

washed at 90°C

TurboPerfect i*, EcoPerfect

ć, Fácil S (Easy-iron), Skin Care

+ Prelav. (Prewash)

Antialergias

(Clinic Wash)

7 - 60 °C colour fast cottons or linen

TurboPerfect i*, EcoPerfect

ć, Fácil S (Easy-iron), Skin Care;

for particularly sensitive skin; longer wash programme at selected tem-

perature, higher water level, additional rinse cycle

Sintéticos (Easy-Care)

7 - 60 °C

3.5 kg

easy-care cotton, linen, synthetic or blended fabrics

TurboPerfect i, EcoPerfect

ć, Fácil S (Easy-iron), Skin Care

+ Prelav. (Prewash)

Mix 7 - 40 °C cotton or synthetic fabrics

TurboPerfect i, EcoPerfect

ć, Fácil S (Easy-iron), Skin Care

different types of laundry can be washed together

R. de cama

(Easy-Care plus)

7 - 40 °C bed linen or dark cotton and dark synthetic fabrics

TurboPerfect i, EcoPerfect

ć, Fácil S (Easy-iron), Skin Care;

reduced rinse and final spin cycle

Camisas/Blusas

(Shirt/Blouses)

7 - 60 °C

2 kg

non-iron shirts made of cotton, linen, synthetic fibres

or blended fabrics

TurboPerfect i, EcoPerfect

ć, Fácil S (Easy-iron), Skin Care;

Fácil S (Easy-iron): spin only, hang up dripping wet

Delicado/Seda

(Delicate/Silk)

7 - 40 °C

for delicate fabrics, e.g., silk, satin, synthetic fibres or

blended fabrics (e.g. curtains)

TurboPerfect i, EcoPerfect

ć, Fácil S (Easy-iron), Skin Care:

no spin between rinse cycles

ÿ Lana/Lã (Wool) 7 - 40 °C hand/machine washable wool

particularly delicate wash programme to avoid shrinkage of laundry;

longer programme breaks (fabrics rest in the detergent solution)

Rápido (Super Quick) 15’ 7 - 40 °C

synthetic cotton, linen, synthetic fibres or blended fab-

rics

Short programme of approx. 15 minutes,

suitable for lightly soiled laundry

Sport 7 - 40 °C microfibre fabrics

TurboPerfect i, EcoPerfect

ć, Fácil S (Easy-iron), Skin Care

Plumas/Penas (Down) 7 - 40 °C 1 kg

machine-washable down-filled clothing

(no cushions or duvets)

TurboPerfect i, EcoPerfect

ć, Skin Care;

Wash large items individually, meter detergent sparingly, apage 6

Additional programmes Rinse  / Centrif. adicional (Spin) , Empty >

* reduced load with additional function TurboPerfect i.

For programmes without prewash, add detergent to compartment II. For prewash programmes, distribute the detergent between compartments I and II.

9405 / 9000980666

9000980666

WAQ24468EE /...

Robert Bosch Hausgeräte GmbH

CarläWery Str. 34

81739 Munich / Germany

8

Safety instructions

– Carefully read the instruction manual and the information enclosed, and act accordingly.

– Keep the machine's documentation for future reference.

Risk of electric shock! – Never pull the cable to disconnect the mains plug!

– Never insert/disconnect the mains plug with damp hands.

Danger to life! For worn-out appliances:

– Disconnect the mains plug.

– Sever the mains cable and discard along with the plug.

– Destroy the lock on the washing machine door. This will prevent children from

locking themselves in and risking their lives.

Danger of suffocation! – Keep packaging, film and packaging parts out of the reach of children.

Risk of poisoning! – Keep detergents and care products out of the reach of children.

Risk of explosion! – Items of laundry pretreated with cleaning agents containing solvents, e.g. stain

remover/cleaning solvent may lead to an explosion after being loaded into the

washing machine.

Rinse items of laundry thoroughly by hand beforehand.

Risk of injury! – The washing machine door may become very hot.

– Be careful when draining hot detergent solution.

– Do not climb onto the washing machine.

– Do not lean on the open washing machine door.

– Do not reach into the drum if it is still rotating.

– Be careful when opening the detergent drawer while the machine is in operation.

Consumption values depending on model

Programme Load Electricity*** Water***

Programme

duration

***

Algodón/Algodão 20 °C 8 kg 0.37 kWh 68 l 2 ½ h

Algodón/Algodão 30 °C 8 kg 0.40 kWh 68 l 2 ½ h

Algodón/Algodão 40 °C* 8 kg 1.05 kWh 68 l 2 B h

Algodón/Algodão60 °C 8 kg 1.15 kWh 68 l 2 B h

Algodón/Algodão90 °C 8 kg 2.30 kWh 80 l 2 B h

Sintéticos 40 °C* 3.5 kg 0.64 kWh 55 l 1 B h

Mix 40 °C 3.5 kg 0.54 kWh 47 l 1 h

Delicado/Seda 30 °C 2 kg 0.19 kWh 34 l B h

Lana/Lã 30 °C 2 kg 0.17 kWh 39 l B h

* Programme setting for testing in accordance with valid standard EN60456.

Note on comparative tests: For testing the test programmes, wash the specified load using the maximum spin speed.

Programme

Additional

function

Load

Annual energy

consumption

Annual water

consumption

Algodón/Algodão40/60 °C

EcoPerfect

ć**

8/4 kg 179 kWh 8700 l

** Programme setting for testing and energy labelling in accordance with EU directive 2010/30/EU with cold water (15 ºC).

*** The values deviate from the indicated values depending on water pressure, hardness, and inlet temperature, ambient tem-

perature, type, amount and soiling of the laundry, detergent used, fluctuations in the power supply and selected additional

functions.

9

Care and cleaning

Before the first wash

Do not put laundry in the machine! Turn on the tap. Put into compartment II:

– approx. 2 litres of water

– detergent (measure according to the manufacturer's instructions for lightly soiled laundry and water hardness)

Turn the programme selector to Sintéticos (Easy-Care) 60 °C and press

Inicio (Start/Reload). At the end of the

programme, turn the programme selector to

Stop.

Machine housing, control panel

– Remove detergent and cleaning agent residue.

– Wipe with a soft, damp cloth.

– Do not wash the machine with a jet of water!

Cleaning the detergent drawer ...

... if it contains detergent or fabric softener residues.

1.

Pull out, press insert down and remove drawer completely.

2. To remove the insert: press upwards from below with your finger.

3. For models with insert for liquid detergent:Slide the insert upwards and remove it from the back.

4. Clean the detergent dispenser tray and inserts with water and a brush and dry them.

5. Attach the insert and engage (connect the cylinder to the guide pin).

6. Push in the detergent drawer.

Leave the detergent drawer open so that any residual water can evaporate.

Drum

Leave the washing machine door open so that the drum can dry out.

For rust stains, use chlorine-free cleaning agent, not steel wool.

Descaling Ensure there is no laundry in the machine!

This will not be necessary if the correct dosage of detergent is used. If it is, descale the appliance according to the

manufacturer's instructions. Descaling products can be acquired on the website or from customer services aInstallation

instructions.

Emergency release (e.g. in the event of a power cut)

The programme continues to run when the power has been restored. However, if the laundry has to be removed, the

washing machine door can be opened as follows:

Risk of scalding!

The detergent solution and laundry may be hot. Let it cool.

Do not reach into the drum if it is still rotating.

Do not open the washing machine door if water can be seen through the glass.

1.

Turn the programme selector to Stop and disconnect the mains plug.

2. Drain the detergent solution apage 10.

3. Pull the emergency release downwards with a tool and release.

The washing machine door can then be opened.

Information on the display panel depending on model

,flashes Close the washing machine door properly; laundry may be caught.

§: ³Å,

§: É

Turn on the (cold water) tap fully, supply hose kinked or trapped;

Clean the filter apage 10, water pressure too low.

§: ³µ– Detergent solution pump blocked; Clean the detergent solution pump apage 10.

– Drainage hose / waste pipe blocked; Clean the drainage hose at the siphon apage 10.

– Heavy foam build-up apage 11, status indicator 1 flashes.

§: ´Water in the base tub, appliance leaking. Call customer services!

©: ³¯– Open the (hot water) tap fully.

– Inlet hose kinked/trapped.

– Water pressure too low. Clean the filter apage 10.

– Hot water hose not connected; appliance will operate using cold water only. Ignore information, only for first

wash cycle.

(Childproof lock activated: to deactivate a page 5.

– Risk of electric shock! Disconnect the mains plug.

– Risk of explosion! Do not use solvents.

9

10

Maintenance

Detergent solution pump

Turn the programme selector to Stop and disconnect the mains plug.

1. Using a screwdriver or the insert for liquid detergent

(depending on model), open and remove the service flap.

2. Remove the folding gutter and place a large enough container underneath.

3. For models with a drainage hose: Remove the drainage hose from the retainer and pull it

from the housing.

Remove the sealing cap, allow the detergent solution to flow out into the container. Replace

the sealing cap and place the drainage hose in the retainer.

3* For models without a drainage hose: Carefully unscrew the pump cover 180° or until the

detergent solution begins to flow out on the folding gutter. When the container is full, close

the pump cover and empty the container. Repeat the above steps until all the detergent

solution has completely drained out.

4. Carefully unscrew the pump cover (there may be residual water).

5. Clean the interior, pump cover thread and pump housing (the impeller in the detergent

solution pump must rotate).

6. Replace the pump cover and screw it tightly.

7. Return the drainage hose (depending on model) and the folding gutter to their start position.

8. Place the service flap back on and close.

To prevent unused detergent from flowing straight into the drain during the next wash:

Pour 2 litres of water into compartment II and then start theEmpty > programme.

Drainage hose at the siphon

Turn the programme selector to Stop and disconnect the mains plug.

1. Loosen the hose clamp, carefully remove the drainage hose (residual water).

2. Clean the drainage hose and siphon connecting piece.

3. Reattach the drainage hose and secure the connection with the hose clamp.

Filter in the water supply

Risk of electric shock!

Do not immerse the Aqua-Stop safety device in water (contains an electric valve).

Reduce the water pressure in the supply hose:

1. Turn off the tap.

2. Select any programme (except Rinse  / Centrif. adicional (Spin)  // Empty >).

3. Choose Inicio (Start/Reload). Let the programme run for approximately 40 seconds.

4. Turn the programme selector to Stop. Disconnect the mains plug.

Clean the filter:

5. Disconnect the hose from the tap.

Clean the filter using a small brush.

and/or for Standard and Aqua-Secure models:

Remove the hose on the rear of the appliance.

Remove the filter with pliers and clean.

6. Connect the hose and check for leaks.

– Risk of burning!

Allow the detergent solution to cool.

– Turn off the tap.

11

What to do if...

ʑ

Water is leaking out – Attach/replace the drainage hose correctly.

– Tighten the screw connection of the supply hose.

ʑ

No water supply.

Detergent not dispensed.

– Inicio (Start/Reload) not selected?

– Tap not turned on?

– Filter blocked? Clean the filter apage 10.

– Supply hose kinked or trapped?

ʑ

The appliance door will not

open.

– Safety function active. Programme stopped? apage 4.

–  (without final spin) selected? apage 3, 4.

– Can be opened by emergency release only? apage 9.

– Door locked after the washing machine is switched off: Switch on the washing

machine and wait for 5 seconds.

ʑ

The selected programme does

not start.

– Inicio (Start/Reload) or  (Ready in) time selected?

– Washing machine door closed?

– Childproof lock active? Deactivate apage 5.

ʑ

Detergent solution is not

drained.

–  (without final spin) selected? apage 3, 4.

– Clean the detergent solution pump apage 10.

– Clean the waste pipe and/or drainage hose.

ʑ

No water can be seen in the

drum.

– Not a fault. Water remains inside below the visible area.

ʑ

Spin result not satisfactory.

Laundry wet/too damp.

– Not a fault. Spin control system has stopped the spin cycle. Uneven distribution of

laundry.

Distribute large and small items of laundry evenly in the drum.

– Fácil S (Easy-iron) selected? apage 5.

– Selected speed too low? apage 5.

ʑ

Programme duration changes

suddenly during operation.

– Not a fault. The program time can vary according to the distribution of laundry, with

it therefore being possible for the display panel to show adjustments in the

duration.

ʑ

Spin cycle performed several

times.

– Not a fault. The balance control system has detected an imbalance and is

attempting to redress this by repeating the spin.

ʑ

Residual water in the

compartment for care products.

– Not a fault: the action of the care product is not affected.

– Clean the compartment if necessary apage 9.

ʑ

Odour formation in the washing

machine.

– Run programme Algodón/Algodão (Cottons)90 °C without laundry. Use

standard detergent.

ʑ

Status display 1 flashing.

Appliance has detected a

detergent overload.

– Too much detergent used?

If foam is escaping from the detergent drawer: mix 1 tablespoon of fabric softener

with ½ litre of water and pour into compartment II (not with outdoor or down

fabrics).

– Reduce the detergent dosage for the next wash cycle.

ʑ

Intense noise formation,

vibrations and "wandering"

during the spin cycle.

– Are the appliance feet fixed?

Secure the appliance feet aInstallation instructions.

– Transportation safety devices removed?

Remove transportation safety devices aInstallation instructions.

ʑ

Display panel/indicator lamps

remain turned off while the

machine is working.

– Energy-saving mode apage 5.

– Power cut?

– Fuses triggered? Reset/change the fuse.

– If the fault occurs repeatedly, call customer services.

ʑ

Programme sequence longer

than usual.

– Not a fault. Unbalanced load detection system adjusts imbalance by repeatedly

distributing the laundry.

– Not a fault: foam detection system active; adds an additional rinse cycle.

ʑ

Detergent residues on the

laundry.

– Occasionally, phosphate-free detergents contain water-insoluble residues.

– Select Rinse  / Centrif. adicional (Spin)  or brush out the laundry after

washing.

If you cannot correct a fault yourself or if a repair is necessary:

– Turn the programme selector to Stop and remove the mains plug from the socket.

– Turn off the water supply and call customer services aInstallation instructions.

en operating instructions

Washing machine

WAQ24468EE / ...

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Bosch WAQ24478EE Wasmachine. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Bosch. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Bosch WAQ24478EE Wasmachine in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Bosch Wasmachines
Meer handleidingen voor Wasmachines

Veelgestelde vragen over Bosch WAQ24478EE Wasmachine

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.