Handleiding Bosch WAS32890EU Wasmachine

Handleiding

8

Safety instructions

– Read the instructions for use and the Installation/Maintenance instructions and all other

information enclosed with the washing machine and act accordingly.

– Retain documents for subsequent use.

Risk of electric shock – Never pull out the mains plug by tugging the power cord.

– Insert/pull out the mains plug with dry hands only.

Danger to life On redundant appliances:

– Pull out the mains plug!

– Sever the power cord and discard together with the plug.

– Destroy the lock on the washing-machine door. This will prevent

children from locking themselves in and suffocating.

Risk of suffocation – Keep packaging, plastic film and packaging parts out of the reach

of children.

Risk of poisioning – Keep detergents and care products out of the reach of children.

Risk of explosion – Caused by detergents containing solvents, e.g. stain remover/

items of washing pretreated with solvent naphtha may result in an

explosion after being loaded into the washing machine.

First rinse items thoroughly by hand.

Risk of injury – Washing machine door may become very hot.

– Caution when draining hot detergent solution.

– Do not climb on the washing machine.

– Do not lean on the open washing machine door.

– Do not reach into the drum in case it is still rotating.

Consumption values

Programme Load Current*** Water***

Programme

duration

***

L Cottons 20 °C 8 kg 0.23 kWh 57 l 2@ h

L Cottons 40 °C* 8 kg 0.97 kWh 57 l 2A h

L Cottons 60 °C 8 kg 1.36 kWh 57 l 2A h

 Cottons 90 °C 8 kg 2.34 kWh 68 l 2@ h

I Easy-Care 40 °C* 3.5 kg 0.55 kWh 41 l 1A h

L Mix 40 °C 3.5 kg 0.47 kWh 37 l 1 h

 Delicate/Silk 30 °C 2 kg 0.14 kWh 35 l B h

/ü: Wool 30 °C 2 kg 0.16 kWh 40 l B h

* Programme setting for test according to currently valid European standard 60456.

Information about comparability tests: To test the test programmes, wash indicated load size

at maximum selectable spin speed.

Programme Additional function Load

Annual energy

consumption

Annual water

consumption

L Cottons ~jEcoPerfect** 8/4 kg 189 kWh 10500 l

** Programme setting for testing and energy labelling in accordance with EU directive 2010/30/

EU with cold water (15 °C).

*,** Programme setting for tests: set intelligent dosage i-DOS1 and i-DOS2 to – (OFF), manually

dose washing powder via dispenser B/C.

*** The values may deviate from the stated values depending on water pressure and hardness,

room temperature, type and amount of laundry, detergents used, fluctuations in the mains vol-

tage and selected additional functions.

8

9

Important information

Protecting the washing and the machine

– Empty pockets. Remove metal parts (paper clips, etc.).

– Wash delicates in the net/bag (tights, curtains, underwired bras).

– Close zips, button up covers.

– Brush sand out of pockets and collars.

– Remove curtain fittings or include in the net/bag.

Insert laundry

– To ensure an optimum spin performance, load large and small items of washing.

– Individual items may cause excessively large imbalances.

– Do not jam items of washing between the washing machine door and rubber seal.

Soaking Load washing of the same colour.

Dose detergent with i-DOS or pour into dispenser B/C according to manufacturer’s

instructions. Select the required programme. Select $Start/Reload. After approx. 10

minutes select $ Start/Reload to stop the programme. After the required soaking time,

select $Start/Reload again. Programme continues.

Starching Washing should not be treated with fabric softener.

Select 2/Rinse/Spin programme. Manually pour liquid starch into the B/C dispenser

according to manufacturer's specifications (if required clean beforehand). Select $Start/

Reload.

Dyeing/Bleaching

Dye in household quantities only. Salt may attack stainless steel! Observe specifications of

the dye manufacturer! Do not bleach washing in the washing machine!

Load display

The load sensor detects the load level in the washing machine. The washing is not balanced.

Load adjust

Independently of the load display, the load adjust. uses other sensors to optimally adjust the

water and power consumption and the programme duration in each programme – depending

on textile type and load.

Reload

Select $ Start/Reload button if you want to add more items of washing after the programme

starts. The machine checks whether a top-up is possible. Follow the information on the display

panel. At a high water level and/or temperature or while the drum is rotating, the washing

machine door remains locked for reasons of safety.

To continue the programme, select the $Start/Reload button.

Childproof lock/appliance lockout ON/OFF, display symbol #

The washing machine can be secured to prevent the set functions from being unintentionally

changed.

Activate:

Deactivate:

Press the ÙOptions button for 5 seconds. Symbol # is lit.

Press the Options button for 5 seconds.

– If the programme selector is moved after start: Symbol # flashes.

First move programme selector back to the original programme, then deactivate.

– Childproof lock can remain activated until a programme is next started, even after the

machine is switched off (name of the programme last run is indicated on the display panel).

Then deactivate the childproof lock before the programme starts and, if required, re-activate

after the programme starts.

Programmes with prewash, display symbol 

Prewash can be selected in certain programmes.

For intelligent dosage i-DOS: Selected detergent is used for prewash and main wash.

To avoid an unnecessary overdosage of detergent for prewash/main wash, we recommend

the setting normal for the dosage.

Manual dosage: Divide detergent for prewash and main wash. Put detergent for

prewash in the drum and pour detergent for main wash in dispenser B/C.

Do not use any detergents containing bleach for coloured textiles.

#



10

Information on programmes/options

ʑ

Automatic programmes

The degree of soiling and the type of washing are automatically detected and the washing

sequence as well as intelligent dosage are optimally adjusted.

– automatic: for durable textiles

– automatic soft: gentler treatment of washing

ʑ

Rinse/Spin

For this combined 2/Rinse/Spin programme a rinse cycle is preset under the

Rinse Plus 2 programme option. aPage 6

If only a spin cycle is required, set Rinse Plus 2 to OFF.

ʑ

Stain selection

Do not let stains dry. Remove solid substances beforehand. Arrange items of washing as

usual and load washing machine. Select a stain type (cannot be combined).

A total of 16 different stains can be selected. The washing machine adjusts the

washing temperature, drum movement and soaking time specific to the type of stain.

Hot or cold water, gentle or intensive washing control and long or short soaking

provide the wash programme with a special sequence for each type of stain.

Select stain selection by pressing the  Options button; select Stain by pressing the

/Change buttons.

The result: stains are treated optimally.

ʑ

Stains

baby food

blood

bott. sock dirt

butter/edi. oil

chocolate

coffee

cosmetics

egg

grass

orange

red wine stain

soil and sand

strawberry

sweat

tea

tomato

ʑ

2 stain programmes explained in detail (examples)

egg Soaking in a lukewarm water bath, selected wash cycle with higher water level and

additional rinse cycles to remove particles.

blood Blood is first “dissolved” in cold water, then the selected wash programme starts.

For the other stains we have developed comparable solutions in intensive studies.

11

Intelligent Dosage System (i-DOS)

Switching on the appliance

The appliance has been preset at the factory for dosing a liquid

detergent and a fabric softener, identified by corresponding filling

lids:

–

« Standard/universal detergent, enclosed.

– 0 Softener only i-DOS2, pre-installed,

Instead of softener, a second liquid detergent can also be used

in dispenser i-DOS2. aPage 13

Filling dispenser

1. Open detergent drawer.

2. Open fill cover.

3. Add detergent/fabric softener. Do not fill above the max mark.

4. Close fill cover.

5. Slowly push in detergent drawer.

Once the appliance is switched on, the completely inserted drawer

is indicated by:

– A small display on the handle is lit when intelligent dosage i-

DOS1/i-DOS2 is selected. aPage 11

– Display flashes once if intelligent dosage is not selected. a

Page 11

When selecting your detergent and care product, follow the manufacturers instructions.

We recommend the use of standard, universal and color liquid detergents for all machine-

washable, coloured textiles made of cotton and synthetic materials.

– Use liquid products only.

– Do not use any solvent-based, corrosive or gas-emitting products (e.g. liquid beach).

– Do not mix detergent and softener.

– Do not use any superimposed or highly thickened products.

– To prevent product from drying, do not leave the fill cover open for a long time.

In daily use

ʑ

Illuminated displays in the drawer handle

– Display is lit if intelligent dosage is selected for the dispenser.

– Display flashes if level below minimum.

– Display flashes briefly when drawer has been inserted correctly

(if intelligent dosage not selected).

aseparate Installation/Maintenance instructions, Page 9

12

Intelligent Dosage System (i-DOS)

ʑ

Selecting and deselecting intelligent dosage/adjusting dosage strength

The intelligent dosage of detergent and softener is selected in the factory for all permitted

programmes, a Page 7 (dosage strength normal) and can be changed individually for each

programme.

In addition to intelligent dosage, washing additives (e.g. stain remover) can be added

manually via dispenser

B/C.

Changing dosage strength:

1. Select dosage options by pressing i-DOS1 / i-DOS2

buttons.

2. Select required dosage strength by pressing / Change

buttons.

Indicator lamp in the drawer handle goes out when the

setting is OFF.

finished in 2:26

i-DOS1: deterg.

®)cdosage: normal

The selection (OFF/light/normal/strong) of i-DOS1 and i-DOS2 is retained for each

programme until the next change occurs, even if the machine is switched off.

ʑ

Reloading detergent/softener

The flashing of the associated illuminated display when intelligent dosage is selected and

a corresponding message on the display panel indicate that the level is below the minimum.

There are still enough contents for approx. 3 washes.

The same detergent or softener can be topped up at any time. If the product/manufacturer is

changed, we recommend cleaning the dispensers beforehand aseparate Installation/

Maintenance instructions, Page 8, 9, and, if required, adjusting the basic dosage.

Standard settings i-DOS

ʑ

If required, change basic dosages for detergent and softener

The basic dosage is the dosage of detergents and softeners for an average domestic load.

The basic dosage to be set corresponds to the recommendation of the detergent or softener

manufacturer (normal soiling, average softness, average domestic load for the existing water

hardness).

This information can be found on the package label of the detergent/softener or ask the

manufacturer directly.

To determine the existing water hardness, use a test strip or check with your water supply

company.

My water hardness:

Factory setting of the basic dosage: detergent 75 ml/softener 36 ml

To adjust the basic dosages:

1. Press ÙOptions button to select option i-DOS1 : basis or

i-DOS2 : basis.

2. Press /Change buttons to set the basic dosage (10 ml –

200 ml).

finished in 2:26

Ē

i-DOS1 basis

®)c

deterg.: 75 ml

hold down button = quick run through

13

Intelligent Dosage System (i-DOS)

ʑ

Converting i-DOS2 dispenser contents

Instead of softener, a second liquid detergent can also be

used in dispenser i-DOS2.

1. Press ÙOptions button to select i-DOS2: content.

2. Press /Change buttons to switch between softener and

detergent.

finished in 2:26

Ē

i-DOS2: content

®)csoftener

– An additional changeable insert for a second detergent is enclosed and can be fitted in the

fill cover. aPage 11

– When the dispenser contents are changed, the basic dosage is reset to the corresponding

factory setting. If required, adjust the basic dosage.

Manual dosage in dispenser B/C

1. Set intelligent dosage to – (OFF). aPage 12

2. Dose in dispenser B/C according to amount of washing,

manufacturer’s specifications and existing water hardness.

B/C = Powder/liquid detergent

– Do not manually dose liquid detergent for programmes with Prewash  and/or with

end time programme option.

– For programmes with Prewash  pour in detergent. aPage 9

Do not open detergent drawer while water is being supplied.

Customer service

ʑ

If you cannot rectify the fault yourself (aseparate Installation/Maintenance instructions,

What to do if ...), please contact our customer service. We will always finds a suitable solution

to avoid unnecessary visits by technicians.

ʑ

You can find the contact data for your nearest customer service here or in the customer

service list (depending on model).

– GB

– IE

0844 8928979

(Calls from a BT landline will be charged at up to 3 pence per minute. A call set-up

fee of up to 6 pence may apply.)

01450 2655

ʑ

Please give customer service the product number (E-Nr.) and the production number (FD)

of the appliance.

Product number Production number

These instructions can be found on:

inside of washing machine door */open

service flap * and rear of the appliance.

* depending on model

ʑ

Rely on the competence of the manufacturer. Contact us.

You can therefore be sure that the repair is carried out by trained service technicians who

carry original spare parts.

en operating instructions

Washing machine

with Intelligent Dosage System

WAS32890EU

Observe the safety instructions on page 8.

Read these instructions and the separate installation

instructions before operating the washing machine.

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Bosch WAS32890EU Wasmachine. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Bosch. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Bosch WAS32890EU Wasmachine in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Bosch Wasmachines
Meer handleidingen voor Wasmachines

Veelgestelde vragen over Bosch WAS32890EU Wasmachine

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Bosch WAW28469IL Wasmachine

Handleiding

Bosch WGG244MPFGB Wasmachine

Handleiding

Bosch WAJ20062IN Wasmachine

Handleiding

Bosch WAT24482IL Wasmachine

Handleiding

Bosch WGA1320SIN Wasmachine

Handleiding

Bosch WGA25400TH Wasmachine

Handleiding

Bosch WAU28R70NLB Wasmachine

Handleiding

Bosch WAJ24168IN Wasmachine

Gerelateerde categorieën