8
Drying table
Algodón/Algodão (textiles made of cotton or linen such as underwear, T-shirts, sweaters, trousers, kitchen towels)
Dry weight in kg 0.5ɛ1.0 1.0ɛ2.0 2.0ɛ3.0 3.0ɛ4.0 Dry weight in kg ɛ0.5 ɛ1.0 ɛ2.0 ɛ2.5
Estimated
drying time
in minutes
Cupboard Dry 35ɛ50 50ɛ70 70ɛ95 95ɛ130
Selectable
drying time
in minutes
30 60 90 120Extra Dry 40ɛ60 60ɛ85 85ɛ115 115ɛ150
Light Dry 45ɛ65 65ɛ95 95ɛ130 130ɛ175
Recommended programm
Secar Normalc(auto)
Secar Normal (time)
Sintéticos (textiles made of synthetic or mixed fibres such as shirts, sportswear, delicate garments)
Dry weight in kg 0.5ɛ1.0 1.0ɛ2.0 2.0ɛ2.5 Dry weight in kg ɛ1.0 ɛ1.5 ɛ2.0
Estimated
drying time
in minutes
Cupboard Dry
35ɛ45 45ɛ65 65ɛ90
Selectable
drying time
in minutes
60 90 120Extra Dry
35ɛ55 55ɛ85 85ɛ125
Light Dry
40ɛ60 60ɛ95 95ɛ140
Recommended programm Secar Suavec(auto) Secar Suave (time)
Times are approximate and refer to standard load, spin programme and environment temperature.
For terry towels or other large textile items ,the auto dry time maybe prolonged. and Extra Dry is recommended
The maximum selectable drying time (time dry) is 120 minutes, if the load of the laundry to be dried is more than 2.5 kg, please select
auto dry function. Auto dry is recommended to achieve a good drying result and save energy. 15 minutes drying programme is for
cooling down the laundry.
Only auto dry can be used for washing and drying without interruption; when single drying programme is selected, you can choose
auto dry, or time dry with desired drying time. Setting of drying function aPage 10
* There are 3 drying targets available for auto dry mode. You can select one by touching Secar.
|
: Cupboard dry: for daily laundry, can be worn as soon as the drying programme ends.
{: Extra dry: for heavy laundry, can be additionally dried to remove dampness in the cold season.
: Light dry: for delicate laundry, must be hung out or ironed when the drying programme ends.
Consumption values
Programme Option Load
Electricity
consumption***
Water***
Programme
duration***
Algodón/Algodão 30 °C**
7 kg
0,29 kWh 74 l 2:35 h
Algodón/Algodão 40 °C**
7 kg
0,81 kWh 74 l 2:45 h
Algodón/Algodão 60 °C**
7 kg
1,49 kWh 74 l 2:45 h
Algodón/Algodão 60 °C**
ecoPerfect is activated
Rinse plus is deactivated
7 kg
0,91 kWh 51 l 3:40 h
Algodón/Algodão 90 °C
7 kg
2,20 kWh 84 l 2:35 h
Sintéticos 40 °C**
ecoPerfect is activated 3,5 kg
0,53 kWh 55 l 1:43 h
Mix 40 °C**
3,5 kg
0,47 kWh 52 l 1:03 h
Delicados 30 °C
2 kg
0,14 kWh 29 l 0:39 h
:Lana/Lã cold
2 kg
0,02 kWh 42 l 0:36 h
:Lana/Lã 30 °C
2 kg
0,16 kWh 42 l 0:36 h
Secar Normal
4 kg
2,55 kWh 3 l 2:30 h
Secar Suave
2,5 kg
1,55 kWh 3 l 2:00 h
Retirar pelusas/fios cold
0,04 kWh 29 l 0:16 h
Algodón/Algodão 60 °C* +
Secar Normal (|Seco, 2 ciclos)*
ecoPerfect is activated*
Rinse plus is deactivated*
7/3,5 kg 4,76 kWh 57 l 8:08 h
* Programme setting for testing and energy labelling in accordance with EN50229, EU directive 96/60/EC.
** Programme setting for testing according to valid version of EN60456.
Note for comparative testing: to test using the test programmes, wash using the specified load amount and at maximum spin speed.
*** The values deviate from the indicated values depending on water pressure, hardness, and inlet temperature, ambient temperature,
type, amount and soiling of the laundry, detergent used, fluctuations in the power supply and selected additional functions.
8
9
.
ʑ
Display symbols
* Example of display may vary
depending on selections.
The back light of display light
when programme running.
Before programme start, or finish
in time start counting down, or
programme end, if no operation
within 5 min, the back light of
display will go out. Touch any
button first to activate the back
light, then you can take operation.
ʑ
Additional function/Display see detailed information aPage 11
Additional function symbol
displays when this function is
available for selected programme
and symbol goes out when this
function can not be selected
anymore during programme
running.
ʑ
Option buttons
You can change the spin speed and temperature even while the selected programme is running.
The effects depend on the progress of the programme.
°C (Temp.), (Spin speed)
You can change the indicated washing temperature and spin speed. The maximum washing
temperature and spin speed which can be selected depends on the programme that has been
chosen. If is selected, the load is held in the rinsing water.
(Finish in)
When you select a programme, the respective programme duration is displayed. You can delay
the start of the programme before it begins. The finish-in time indicates when the programme will
be finished. It can be set in hour increments up to a maximum of 24 h.
Press and hold the (Finish in) button until the required number of hours is shown (h=hour).
Select Inicio/Pausa+Carga, theâdoor is locked.
Programme progress symbols:
7 (Prewash), 1 (Washing), 2 (Rinse), (Spin), 9 (Drying)
Above symbols on when programme running in particular phase.
progress bar, indicates progress when programme running or indicates
percentage of load to maximum of selected programme when door is opened
before programme starts.Flash, if overload.
Load recommendation display:
kg*: maximum load recommendation in kg for selected washing/drying
programme. aPage 7, Programme overview
Machine state symbols:
+Tap is: On, if low water pressure, programme will be extended.
Flashing, if tap not tuned on or no water supply.
,Door: On if door can be opened.
Overdosage: Foam detected. Maybe too much detergent.
(Childproof lock: On, if childproof lock is activated.
Flashing, if there is misoperation.
Activate/deactivate childproof lock. aPage 10
Remaining time and multi information display:
*: programme remaining time, or
*: Finish in time defined by user. aPage 9
: End of programme, or
:end of programme with the setting (without final spin)
: On if programme is in pause
: On if door can be opened when programme was paused
*:Information on the display. aPage 11
Drying mode, see information and setting a Page 8, 10.
AutoDry, 3 drying targets can be selected as:
|
= Cupboard dry, { = Extra dry, = Light dry
... min, 5 drying duration can be selected, exp:
: drying time defined manually. a Page 9
Additional function can be selected by option button
Stains: (certain one stain can be selected by option button)
_(blood), b(grass), (coffee), (tomato), \(sweat),
(wine)
SpeedPerfect i, EcoPerfect , Rinse plus 2a Page 10
࣋
࣋: Selection bar. on when the additional function is selected.
: Function frame. flash when the additional function can be selected.
Display and Option buttons
10
Secar (Dry)
You can activate, deactivate and set the drying function by touching this option button Secar. When
this function is activated, you can keep on touch this button Secar to move the selection bar below
the symbols of auto drying target and shift the setting of time dry. Keep on touch this button until the
selection bar disappeared, this function is deactivated.
ʑ
Additional functions
See also Programme overview aPage 7
Select the desired additional functions with the (Option) button, keep on touch this button until
your desired function frame flases and then activate the chosen function by touching the (Set)
button, the selection bar appears above the frame, then the function is selected or touch the (Set)
button again to deactivate this function. Repeat operation you can select more additional functions
which available for the selected programme. If no other action, function frame stops flashing and
comes on after several seconds. Additional function is selected sucessfully.
Stains
There are a total of 6 different stains to choose from. When this
function is selected, you can keep on touch the (Set) button to
move the selection bar below the symbol of certain stain, then
this stain is selected.
iSpeedPerfect
Shorten the washing time. For slightly soiled items.
EcoPerfect
Extends the washing time for a more intensive washing ofâheavily
soiled items. Save energy consumption.
2Rinse plus
Additional rinse cycles, extended washing time. For areas with
very soft water or for further improvement of the rinsing result.
ʑ
Inicio/Pausa+Carga (Start/Reload)
For starting or pausing the washing/drying programme.
ʑ
Signal volume (for button signal and information signal)
ʑ
Childproof lock ( Programme will not be changed by accidental operation.
To activate/deactivate the childproof lock:
After the programme starts or finish in time being activated aPage 10, press and hold the
(Finish in) button for 5 seconds.;
Release when the ( symbol lights up. If button signal is on, an acoustic signal will be heard.
When the programme ends, the Inicio/Pausa+Carga indicator remains on to remind you to the
childproof lock.
Touch the (Finish in) button until the ( symbol turns off, the childproof lock is deactivated.
( symbol flashes if the programme has been changed while childproof lock is activated. Ifâthe
childproof lock is deactivated while the programme selector is in a different position from when
the childproof lock was activated, the running programme will be halted.
ʑ
Drum interior light
Drum interior light is installed.It lights a while when machine door is opened or closed. and it will
go out after programme running for 10 seconds.
Set to ÂStop Press and
hold
1 step
clockwise
Information signals
Set volume*
Set volume*
1 step
clockwise
Set to ÂStop
1. Start signal
mode
2. Set volume for ...
Release
#
* If required, set repeatedly
1 step
clockwise
direct
Button signals
Additional functions and Individual settings
11
Please close the door immediately because of rising water level or high temperature.
Door is locked for safety reasons (water level and/or temperature are too high).
For washing programme: In pause status, and are displayed alternately. If you
need to open the door, wait for the temperature to drop or drain the water (e.g. select
2/Centrif. adicional or >(Empty) programme).
For drying programme: If you need to open the door, wait for the temperature to drop or
set drying programme for 15 minutes to cool down the laundry.
If is frequently indicated when the drying programme ends:
Clean the air inlet filter. aInstallation and maintenance instructions, Page 9
Run the Retirar pelusas/fios÷cold programme without laundry.
Door cannot be locked/unlocked due to high temperature of the door lock. Keep the
machine switched on for about 1 minute. Or switch off then switch on to any programme.
Then the machine can beâlocked/unlocked again.
Door cannot be opened due to the high temperature after the drying programme.
The cooling down process will continue until this display disappears and the door can
be opened.
+
Flashing (no water supply):
Tap turned on?
Inlet filter blocked? Clean filter. aInstallation
and maintenance instructions, Page 8
Supply hose kinked or blocked?
On (low water pressure):
Only information. No influence on the
programme process. The programme
duration will be prolonged.
Clean drain pump. aInstallation and maintenance instructions, Page 8;
Outlet pipe/drainage hose blocked.
Hold down the Secar button for 3 seconds to clear this display.
Clean the air inlet filter. aInstallation and maintenance instructions, Page 9
Run the Retirar pelusas/fios÷cold programme without laundry.
Laundry amount information. On when drying phase finished.
: Maybe small load for drying. : Maybe over load for drying.
other displays
Switch off the appliance, wait 5 seconds and switch it back on.
If the display appears again, call the customer service.
Safety instructions
Read and follow the operating and Installation and maintenance instructions and all other
information enclosed with the washer dryer.
Retain documents for subsequent use.
Risk of electric shock Never pull out the mains plug by tugging the power cord.
Never insert/pull out the mains plug with damp hands.
Risk of death
(For worn-out
appliances)
Pull out the mains plug.
Sever the power cord and discard together with the plug.
Destroy the lock on the washer dryer door. This will prevent children from
locking themselves in and risking their lives.
Risk of suffocation Keep packaging, plastic film and packaging parts out of the reach
ofâchildren.
Risk of poisioning Keep detergents and care products out of the reach of children.
Risk of explosion Items of laundry pretreated with cleaning agents containing solvents,
e.g. stain remover/cleaning solvents may lead to an explosion after being
loaded into the washer dryer.
Rinse items of laundry thoroughly by hand before.
Risk of injury Washer dryer door may become very hot.
Take care when draining hot detergent solution.
Do not climb onto the washer dryer.
Do not lean on the open washer dryer door.
Do not touch the drum in case it is still spinning.
Ensure that the pump cap is screwed on while the machine is running to
prevent the escape of water and contact with moving pump parts.
If a drying programme was interrupted, the washer dryer and the laundry
may be very hot, select Secar Normal or Secar Suave and set 15 minutes
programme to cool down the laundry, then remove the laundry.
Information on the display
12
What to do if ...
ʑ
Water is leaking out.
Fit/refit drainage hose correctly.
Tighten the screw connection of the supply hose.
ʑ
No water supply.
Detergent not dispensed.
Inicio/Pausa+Carga not selected?
Tap not turned on?
Filter blocked? Clean the filter.
aInstallation and maintenance instructions, Page 8
Supply hose kinked or trapped?
ʑ
Washer dryer door cannot
beâopened.
Safety function active. Programme stopped? aPage 5
(no final spin/drain) selected? aPage 5
Can be opened by emergency release only. aPage13
Childproof lock is activated? aPage10
ʑ
Programme does not start.
Inicio/Pausa+Carga or (Finish in) selected?
Washer dryer door closed properly?
ʑ
Detergent solution is not
drained.
Clean the drain pump.
aInstallation and maintenance instructions, Page 8
Clean waste pipe and/or drainage hose.
ʑ
Water not visible in the drum.
Not a fault water below the visible area.
ʑ
Spin result not satisfactory.
Wash small and large items of laundry together.
Speed selected too low? aPage 10
ʑ
Spin cycle performed several
times.
Not a fault unbalanced load detection system adjusts the
imbalance.
ʑ
Compartment ~ not rinsed
out completely.
Remove the insert. Clean detergent drawer and insert it again.
aInstallation and maintenance instructions,Page 7
ʑ
Odour formation in the
washer dryer.
Run the Retirar pelusas/fios 90°C programme without
laundry.
Use standard detergents.
ʑ
Foam escapes from the
detergent drawer.
Too much detergent used?
Mix 1 tablespoon of fabric softener with ½ litre of water and
pour into compartment II in the detergent drawer.
Reduce detergent dosage for the next wash cycle.
Use commercially available low foam detergents and care
products which are suitable for use in washer dryer.
ʑ
Excessive noise, vibrations
and wandering during spin
cycle.
Are the appliance feet fixed?
Secure the appliance feet.
aInstallation and maintenance instructions, Page 5
Transportation safety devices removed?
Remove transport bolts.
aInstallation and maintenance instructions, Page 3
ʑ
Display panel/indicator
lamps do not function while
the appliance is running.
Power failure?
Circuit breaker tripped? Reset the circuit breaker/change the
fuse.
If the fault occurs repeatedly, call the customer service.
ʑ
Programme sequence longer
than usual.
Not a fault unbalanced load detection system adjusts
imbalance by repeatedly distributing the laundry.
Not a fault foam detection system active adds an additional
rinse cycle.
ʑ
Detergent residues on the
laundry.
Occasionally, phosphate-free detergents contain water-
insoluble residues.
Select 2/Centrif. adicional or brush the laundry after
washing.
ʑ
Spinning noise during drying.
This is an innovative process called thermospinning to reduce
energy consumption during drying.
ʑ
Differently coloured fluff is
redeposited to the laundry
Run the Retirar pelusas/fios cold programme without laundry
inside to remove fluff accumulated in the tub during tumble
drying.
ʑ
Water inlet noise during
drying, Water tap symbol
isâflashing during drying.
The machine includes a self cleaning function to remove fluff
that is released from laundry during drying. This is done with
help of a small amount of tap water. Open the water tap also
during drying.
13
ʑ
Drying duration extended.
According to the air cooling principle, higher environment
temperature will result in poor drying performance, so the
drying duration will be extended. Ensure a good ventilation
to remove exhaust heat.
Air inlet filter blocked?
aInstallation and maintenance
instructions, Page 9: Clean the air inlet filter
Run the Retirar pelusas/fios cold programme without laundry
to remove fluff accumulated in the tub and drying system.
ʑ
Drying programme does not
start.
Drying programme not selected? aPage 10: Secar (Dry)
option button and Page 7: Programme overview
Loading door not closed properly?
Pump is blocked?
aInstallation and maintenance
instructions, Page 8: Clean the pump
ʑ
The drying result is not
satisfactory (laundry is not dry
enough).
Too high environmental temperature (above 30â°C) or bad
ventilation of the room, where the washer dryer is placed
ensure good ventilation to remove exhaust heat.
The laundry has not been spun well enough before drying
always set the highest selectable spin speed for all washing
programmes.
Machine overload: please follow the load recommendation
in the programme table and load display, do not overload
machine, because of maximum load amount for drying is lower
than for washing unload the machine after washing with
maximum load for washing and separate the load into two
drying cycles.
The line voltage of the power supply is too low (below 200âV)
ensure suitable power supply.
Air inlet filter blocked? aInstallation and maintenance
instructions, Page 9: Clean the air inlet filter
Thick multilayered textiles or textiles with thick fillings these
textiles easily dry on the surface, but not inside. This
equalization process may take longer. Please use time drying
programs to completely dry these kinds of textiles.
ʑ
A small amount of water is
observed dripping on the
dried laundry load when the
door is opened.
Drying time is shortened with a small load. Some residual
moisture may remain in the drying system. Opening the door
quickly creates a suction effect which pulls moisture from the
drying system.
Open the door slowly. Avoid jerking the door open.
ʑ
Drum interior light cant light
Call the customer service
ʑ
If you cannot correct a fault yourself or a repair is required:
Turn the programme selector to Â
Stop and pull the mains plug out of the socket.
Turn off the tap and call customer services.
Emergency release e.g. in the event of power failure
The programme will continue to run when the power is restored.
However, if the laundry has to be removed, the washing
machine door can be opened as follows:
Risk of scalding.
The detergent solution and laundry may be hot.
If possible, leave it to cool down.
Do not open the washer dryer door if water can be seen
through the glass.
Set the programme selector to ÂStop and disconnect the mains
plug.
Drain the detergent solution.
aInstallation and maintenance instructions, Page 8
Pull the emergency release with a tool and release.
The washer dryer door can then be opened.
What to do if ...
Washer dryer WVH28540EP
WVH2854XEP
en Instruction manual
Praat mee over dit product
Laat hier weten wat jij vindt van de Bosch WVH28540EP Wasmachine. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.
beantwoord | Ik vind dit nuttig (0) (Vertaald door Google)