Handleiding Bresser MM-04/11 Daglichtlamp

Handleiding

DE

GENERAL WARNINGS

RISK OF BODILY INJURY!

Do not use in the presence of small children or animals. Store out of

the reach of small children and animals.

RISK of ELECTRIC SHOCK!

This device contains electronic components that operate via a power

source (power supply). Only use the device as described in the manual;

otherwise, you run the risk of an electric shock.

The glass body of a lamp may burst at the end of its lifetime. In this

case, disconnect the device from the power supply immediately

(remove plug). Even after unplugging the power cable there is a risk of

electric shock due to the existence of residual electricity!

Never bend, pinch or pull the power and connecting cables, extensions

and adapters. Protect the cables from sharp edges and heat.

Before operating, check the device, cables and connections for

damage. Never use a damaged unit or a unit with damaged power

cables. Damaged parts must be exchanged immediately by an

authorised service centre.

Only use the device in complete dry environment and do not touch it

with wet or moist parts of your body.

RISK of GLARE!

Make sure people and animals do not stare into the light. Due to the

high power of illumintaion, your eyes can be glared or after-images may

achieve. This visual impairment can cause accidents.

RISK of BURNS!

Never touch parts of the device during operation or until it has

sufficiently cooled down (about 45 min. after switching off)!

RISK of FIRE/EXPLOSION!

Due to extreme heat development of some components of up to 250°

C there is an acute FIRE HAZARD! Always set up the device securely,

so that it may not turn over. Ensure for a safe storage.

Never cover the ventilation slots or cooling fins of the device while

using it or as long as it has not sufficiently cooled down!

Keep flammable materials away from the device!

Operate this device only connected with open softboxes to prevent fire

hazard due to heat build!

Keep children and animals away from the device! They could overturn

the device.

Make sure that no one can trip over the connection cables of the

device. The device could be overturned.

Do not expose the device to high temperatures. Use only the supplied

power adapter. Do not short-circuit the device or throw them into a fire.

Excessive heat or improper handling could trigger a short-circuit, a fire

or an explosion.

NOTE!

Do not disassemble the device. In the event of a defect, please contact

your dealer. The dealer will contact the Service Centre and can send

the device in to be repaired, if necessary.

Never touch flash tubes or lamps with bare hands! Use clean cotton

gloves or a clean cloth when inserting or suspending them.

Only use accessories and spare parts for this device as listed in the

technical data.

Disconnect the device from the power supply by pulling the power plug

when it is not used. In case of longer interruption of operation and

before starting any work on maintenance and cleaning.

Position your device so that it can be disconnected from the power

supply at any time. The wall socket you use should be located near the

device and easily accessible, since the plug on the power cable serves

as a disconnecting device for the power supply.

Always pull on the plug to separate the device from the power supply.

Never pull on the cable.

Protect the device from severe shocks!

NOTES ON CLEANING

Before cleaning the device, disconnect it from the power supply

(remove plug)!

Use clean cotton gloves or a clean cloth.

Wait at least about 45 min. until replacing an defective bulb.

Perform all cleaning and maintenance work at the device only as

described in the instruction manual.

Only use a dry cloth to clean the exterior of the device. To avoid

damaging the electronics, do not use any cleaning fluid.

Protect the device from dust and moisture. Store it in the supplied bag

or transportation packaging.

DISPOSAL

Dispose of the packaging materials properly, according to their

type, such as paper or cardboard. Contact your local waste-

disposal service or environmental authority for information on the

proper disposal.

Do not dispose of electronic devices in the household garbage!

As per Directive 2002/96/EC of the European Parliament on

waste electrical and electronic equipment and its adaptation into

German law, used electronic devices must be collected separately and

recycled in an environmentally friendly manner.

EC DECLARATION OF CONFORMITY

Bresser GmbH has issued a „Declaration of Conformity“ in

accordance with applicable guidelines and corresponding

standards. This can be viewed any time upon request.

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Bresser MM-04/11 Daglichtlamp. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Bresser. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Bresser MM-04/11 Daglichtlamp in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Bresser Daglichtlampen
Meer handleidingen voor Daglichtlampen

Veelgestelde vragen over Bresser MM-04/11 Daglichtlamp

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Caremaxx Lite Pad Daglichtlamp

Handleiding

Lumie Arabica Daglichtlamp

Handleiding

Beurer TL 50 Daglichtlamp

Handleiding

Beurer TL 30 Daglichtlamp

Handleiding

Beurer TL 70 Daglichtlamp

Handleiding

Fysic FW-400 Daglichtlamp

Handleiding

Klarstein 10026416 Daglichtlamp

Handleiding

LivarnoLux LTLS 10 A1 Daglichtlamp

Gerelateerde categorieën