Handleiding Brother PT-H105 Labelprinter

Handleiding

Follow these guidelines to avoid the risk of fire, burns, injury,

electric shocks, rupture, overheating, abnormal odours or

smoke.

• Always use the specified voltage and the recommended AC adapter for the P-touch

to prevent any damage or failure.

• Do not use P-touch during a lightning storm when connect to an AC Adapter.

• Do not use the P-touch/AC adapter in places of high humidity (such as bathrooms).

• Do not overload the power cord.

• Do not place heavy objects on, or damage the power cord or plug. Do not forcibly

bend or pull the power cord. Always hold the AC adapter carefully when

disconnecting from the power outlet.

• Make sure that the plug is fully inserted in the power outlet. Do not use an outlet that

is loose.

• Do not allow the P-touch/AC adapter/power plug/batteries to get wet, for example,

by handling them with wet hands or spilling beverages onto them.

• Since loss of eyesight may result when leaked fluid from batteries gets into your

eyes, immediately rinse your eyes with a large amount of clean water, and then

seek medical attention.

• Do not disassemble or modify the P-touch/AC adapter/batteries.

• Do not allow a metal object to contact both the plus and minus ends of a battery.

• Do not use sharp objects, such as tweezers or a metallic pen, to change the

batteries.

• Do not throw the batteries into fire or expose to heat.

• Disconnect the AC adapter, remove batteries immediately and stop using the P-

touch if you notice abnormal odour, heat, discolouration, deformation or anything

unusual while using or storing it.

• Do not use a damaged or leaking battery as the fluid may get on your hands.

• Do not use a deformed or leaking battery or one with a damaged label. There is a

possibility of generating heat.

Follow these guidelines to avoid personal injury, liquid

leakage, burns or heat.

• When the P-touch is not being used, store it out of the reach of children. In addition,

do not allow children to put P-touch parts or labels in their mouths. If any object has

been swallowed, seek medical attention.

• Do not touch metal parts near the print head immediately after printing.

• Do not touch the cutter blade.

• If leaked fluid from batteries gets onto your skin or clothes, immediately rinse them

with clean water.

• Remove the batteries and disconnect the AC adapter if you do not intend to use

the P-touch.

• Do not use a battery other than that specified. Do not use combinations of old and

new batteries or combinations of different types, different charging levels, different

manufacturers or different models. Do not insert a battery with its plus and minus

ends reversed.

• Do not drop or hit the P-touch/AC adapter.

• Do not press on the LCD display.

• Do not put your finger inside the P-touch when you close the cassette cover.

• Before using Ni-MH rechargeable batteries, carefully read the instructions for the

batteries and battery charger, and be sure to use them correctly.

• When using Ni-MH rechargeable batteries, charge the batteries with a specialized

battery charger before using the batteries.

• Depending on the location, material, and environmental conditions, the label may

unpeel or become irremovable, the colour of the label may change or be

transferred to other objects. Before applying the label, check the environmental

conditions and the material.

• Do not use the P-touch in any way or for any purpose not described in this guide.

Doing so may result in accidents or damage to the P-touch.

• Use only Brother TZe tapes with the P-touch. Do not use tapes that do not have

the mark.

• Only use a soft, dry cloth to clean the P-touch; never use alcohol or other organic

solvents.

• Use a soft wipe to clean the print head; never touch the print head directly.

• Do not put any foreign objects into any part of the P-touch.

• Do not place the P-touch, batteries or AC adaptor in direct sunlight or rain, near

heaters or other appliances, or in any location exposed to extremely high or low

temperatures (e.g. on the dashboard or in the back of your car). Avoid high

humidity or dusty locations.

• Do not apply excessive pressure to the cutter lever.

• Do not try to print if the cassette is empty; it will damage the print head.

• Do not pull the tape while printing or feeding; it will damage the tape and P-touch.

• Any data stored in memory will be lost due to failure or repair of the P-touch, or if

the battery expires.

• The P-touch is not equipped with a charging feature for rechargeable batteries.

• The length of the printed label may differ from the displayed label length.

• A protective clear plastic sticker is placed over the display during manufacturing

and shipping. This sticker should be removed prior to use.

• When power is disconnected for more than three minutes, all text, format settings

and any text files stored in the memory will be cleared.

Safety Precautions

Indicates a potentially hazardous

situation which, if not avoided,

could result in death or serious

injuries.

WARNING

Indicates a potentially hazardous

situation which, if not avoided,

may result in minor or moderate

injuries.

General Precautions

CAUTION

Declaration of Conformity

(Europe/Turkey only)

We, BROTHER INDUSTRIES, LTD

15-1, Naeshiro-cho, Mizuho-ku,

Nagoya, 467-8561, Japan

declare that this product is in compliance with the essential

requirements and other relevant provisions of Directives

2004/108/EC and 2009/125/EC.

The Adapter AD-24ES is in compliance with the essential

requirements and other relevant provisions of Directive

2006/95/EC.

The Declaration of Conformity (DoC) is on our Web site.

Please go to http://support.brother.com

-> choose region

(eg. Europe) -> choose country -> choose your model ->

choose “Manuals”-> choose Declaration of Conformity

(*Select Language when required).

Power Supply and Tape Cassette

Open the cassette cover by pressing the

above indicated area at the top end of the

P-touch.

If a tape cassette is already installed, remove it by

pulling it straight up. Also, if batteries are already

installed, remove them.

• Make sure that the power is turned off when

replacing batteries or tape cassettes.

Insert six new AAA alkaline batteries

(LR03) or fully charged Ni-MH batteries

(HR03), making sure that their poles

point in the correct directions.

Users of alkaline batteries:

Always replace all six batteries at the

same time with brand new ones.

Users of Ni-MH batteries:

Always replace all six batteries at the

same time with fully charged ones.

NOTE

Visit us at http://support.brother.com/ for the latest

information about the recommended batteries.

Insert a tape cassette, making sure that

it snaps into place.

• Make sure that the end of the tape feeds under

the tape guides.

• Use only Brother TZe tapes with P-touch.

Securely close the cassette cover, making

sure that it snaps into place.

NOTE

When using optional AC adapter

1. Connect the AC adapter into the AC adapter socket on

the bottom of the P-touch.

2. Insert the plug into the nearest standard electrical

outlet. For memory back up, we recommend using

AAA alkaline batteries (LR03) or Ni-MH batteries

(HR03) together with the AC adapter.

1

Tape cutter

lever

Cassette

cover

2

Print head

3

Toothed

wheel

Cutter’s

edge

End of tape

Tape

exit slot

Tape guide

4

AC adapter socket

NOTE

• The LCD shows one row of 12 characters; however, the text that

you enter can be up to 80 characters in length.

• While selecting the settings, press the Space key to go back to

the default item.

LCD Display & Keyboard

18

19

5

6

7

20

9

1

2

3

4

21

22

12

11

10

14 23

13

24

25

16

17

15

8

1. Size

2. Cursor

3. Caps

4. Underline/Frame

5. Width

6. Style

7. Label Length

If a specific label length has been

selected, also appears.

8. Guidance (left, right)

9. Power key

10. Cursor key : Right

11. Cursor key : Left

12. Backspace key

13. Size key

14. Style key

15. Character keys

16. Caps key

17. Symbol key

18. Menu key

19. Clear key

20. Print key

21. Enter key

22. Auto Designs key

23. Frame key

24. Accent key

25. Space key

• The print preview is a generated image of the label, and may

differ from the actual label when printed.

• Label length shown on LCD may slightly differ from the actual

label length when printed.

1 Start your P-touch.

Supply power by using six AAA batteries or the optional AC

adapter, and then press .

2 Set the language.

3 Set the unit of measurement.

The default setting is [mm].

NOTE

• The P-touch automatically turns off if no keys are pressed within

five minutes.

• To cancel any operation, press .

Initial Settings

/ [Language] /

[English/Español/Français/Hrvatski/Italiano/Magyar/

Nederlands/Norsk/Polski/Português/Portug. (BR)/

Română/Slovenski/Slovenský/Suomi/Svenska/Türkçe/

Čeština/Dansk/Deutsch] .

/ [Unit]

/ [inch/mm] .

Troubleshooting

X Error message X What to do when...

Message Cause/Remedy

Low Battery!

The batteries are weak.

If using AAA alkaline batteries: Replace them with new

ones.

If using Ni-MH batteries: Charge them fully.

Battery Dead

The installed batteries have expired.

Invalid!

An invalid number was entered as the label length.

(This is not displayed in Auto Designs).

No Text!

• You tried to print a text file when there is no data

stored in the memory.

• is pressed when no text is entered.

• You tried to select Text Preview or Cable Label when

no text is entered.

• was pressed when no text was entered while

using the DECO MODE or Auto Designs.

Line Limit!

• You tried to enter a 3rd line by pressing .

• You tried to print or preview two lines of text while

3.5mm or 6 mm tape is installed. Install tape of a

larger size.

No Cassette!

You tried to print a label when there is no cassette

installed.

Cutter Error

The tape cutter lever was used during the printing

process.

Text Full!

The maximum number of characters (80 characters for

regular text, 50 characters for Auto Designs and DECO

MODE) have already been entered.

Text Limit!

With the DECO MODE function:

Since the number of entered characters exceeds the

label length, reduce the text.

All other functions:

Since the number of entered characters exceeds the

label length, reduce the text or select [Auto] as the label

length.

No Frame OK?

Printing on 3.5mm tape with invalid Frame setting ON.

(Select to print with no Frame, to

cancel).

OK to Feed?

Feeding tape after printing when [Chain Print] is

selected. Refer to “Setting Margin”.

Insert 12mm

Only 12mm tapes are available for use with DECO

MODE function.

Wrong Tape!

Use a tape cassette with the mark.

Message Cause/Remedy

Problem Solution

The display stays blank

after you have turned on

the P-touch.

• Check that the batteries are correctly

inserted.

• If the batteries are weak, replace them.

When the label is printed

out, the margin(space) is

too large on both sides of

the text.

• See “Setting Margin” in this users guide

and select [Half] or [Narrow] to have

smaller margins for your label.

The P-touch does not

print, or the printed

characters are not formed

properly.

• Check that the tape cassette has been

inserted correctly.

• If the tape cassette is empty, replace it.

• Check the cassette cover is properly

closed.

The setting has cleared

on its own.

• If the batteries are weak, replace them.

• When power is disconnected for more

than three minutes, all text & formats in

the display will be lost. Language and Unit

settings will also be cleared.

A blank horizontal line

appears through the

printed label.

• There may be some dust on the print

head. Remove the tape cassette and use

a dry cotton swab to gently wipe the print

head with an up-and-down motion.

• The print head can be cleaned more

easily if the optional print head cleaning

cassette (TZe-CL3) is used.

The P-touch has “locked

up” (i.e., nothing happens

when a key is pressed,

even though the P-touch

is on).

• Refer to “Resetting the P-touch”.

The power turns off when

you try to print.

• The batteries may be weak. Replace

them.

• Check that the batteries are correctly

inserted.

• If the batteries are weak, replace them.

The tape does not feed

properly or the tape gets

stuck inside the P-touch.

• Check that the end of the tape feeds

under the tape guides.

• The cutter lever is used while printing. Do

not touch the cutter lever during printing.

All text and format

settings need to be

cleared to create a new

label.

• Press and select [Text&Format].

The LCD is set to an

incorrect language.

• Refer to “Initial Settings”.

Contact Information

See the Web:http://www.brother.com.au

(Australia only)

Problem Solution

With your P-touch H105, you can create labels for multiple

applications. Select from the many frames, character sizes and

styles to design beautiful custom labels. In addition, the variety

of tape cassette available allows you to print labels with different

widths and exciting colours.

Read this manual carefully before you begin and keep the

manual in a handy place for future reference.

Printed in Philippines

LAJ574001

English

User’s Guide

*

1

Visit us at http://support.brother.com/ for the latest information

about the recommended batteries.

Specifications

Dimensions:

(W x D x H)

Approx. 110(W) × 208(D) × 59(H)mm

Weight: Approx. 390 g

(without batteries and tape cassette)

Power supply: Six AAA alkaline batteries (LR03)

Six AAA Ni-MH batteries (HR03)*

1

Optional AC adapter (AD-24ES/AD-

5000ES:For Australia, New Zealand

only)

Tape cassette: Brother TZe tape (width)

3.5mm, 6mm, 9mm, 12mm

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Brother PT-H105 Labelprinter. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Brother. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Brother PT-H105 Labelprinter in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Brother Labelprinters
Meer handleidingen voor Labelprinters

Beoordeling

Gerelateerde producten

Handleiding

Brother PT-2430PC Labelprinter

Handleiding

Brother PT-D200RK Labelprinter

Handleiding

Brother QL-1060N Labelprinter

Handleiding

Brother PT-P750W Labelprinter

Handleiding

Brother TD-2120N Labelprinter

Handleiding

Brother PT-D200 Labelprinter

Handleiding

Brother QL-720NW Labelprinter

Handleiding

Brother VC-500W Labelprinter

Gerelateerde categorieën