12
Operating guidelines
6. Language selection
After properly connecting the HFCK to the power supply, the device will start with starting the car
engine. Then select the language of the voice prompts after the device informs about it by emitting
„select language“. Available languages will be read out (English, German, French and Spanish), single
pressing the center button during current language presentation confirms it’s choice. The list of avail-
able languages will be read three times, in the absence of selection, English will be loaded automati-
cally into.
To change the language selection restore the factory settings by holding Minus button for 10 seconds.
The device will reset, and repeat the procedure of language selection from the beginning.
To turn off the voice prompts just hold Plus button for 10 seconds.
7. Establishing a
Bluetooth
connection
If you wish to establish a
Bluetooth
connection for the first time, you have to activate the
Bluetooth
function of your mobile phone and search for
Bluetooth
devices. In this case, search for a device la-
belled „CC 9048...“.If several devices were identified, please select the HFCK and enter the PIN
number „1234“. The
Bluetooth
connection (pairing) will then be established between your mobile
phone and the HFCK. It is possible that you will also have to click on ‚connect‘ or ‚allow data transfer‘
on your mobile phone if you want to be able to make a connection.
Please note:
Searching for X
Bluetooth
devices and establishing a
Bluetooth
connection may take 2-3
minutes.
With a connection which has successfully been made, the name of the coupled mobile telephone and
of the provider will be shown. Depending on the amount of stored data, this can take a few seconds.
If the synchronisation of the phone book is interrupted, e.g. though an incoming call, it is possible that
all entries will not be transmitted. If this happens, the phone book should once again be manually
synchronised.
If it is not possible to establish a connection, please check and update the software release (firmware)
of your mobile phone or of the HFCK. You will find an overview dealing with this subject on the Internet
at www.bury.com.
Note:
In the internet you can find an overview with a large number of mobile telephones X
which have been tested with this hands-free car kit. Please note, however, the use of
firmware which deviates from the list and is installed on a listed mobile telephone can
lead to the fact that certain displays and functions are no longer possible or only possible
to a limited extent.
Praat mee over dit product
Laat hier weten wat jij vindt van de BURY CC 9048 Carkit. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.