Handleiding Casio Baby-G BGA-255-5AER Horloge

Handleiding

Operation Guide 5593

E-29

Note

x The Stopwatch Mode can indicate elapsed time up to 59minutes, 59seconds.

x An ongoing elapsed time measurement operation will continue internally even if

you change to another mode. However, if you exit the Stopwatch Mode while a

split time is displayed, the split time will not be displayed when you return to the

Stopwatch Mode.

E-28

To perform an elapsed time operation

D

D D D A

Start Stop (Resume) (Stop) Reset

To pause at a split time

D

A A D A

Start Split

(SPL displayed)

Split release Stop Reset

To measure two finishes

D

A D A A

Start Split

(SPL displayed)

First runner finishes.

Display time of first

runner.

Stop

Second runner

finishes.

Split release

Display time of

second runner.

Reset

E-27

Using the Stopwatch

The stopwatch measures elapsed time, split times, and two finishes.

To enter the Stopwatch Mode

Use C to select the Stopwatch Mode as shown on

page E-9.

Seconds

Minutes

E-26

To perform a countdown timer operation

D

D D D A

Start Stop Resume (Stop) Reset

x Before starting a countdown timer operation, check to make sure that a

countdown operation is not in progress (indicated by the seconds counting down).

If it is, press D to stop it and then A to reset to the countdown start time.

To stop the alarm

Press any button.

E-25

3. When the setting you want to change is flashing, use B and D to change it as

described below.

Setting Screen Button Operation

Start Time

Use D (+) and B (–) to change the setting.

x You can set a start time in the range of 1 to 60minutes in

1-minute increments.

Auto-repeat

Press D to toggle auto-repeat on ( displayed) and off

( displayed).

Progress Beeper

Press D to toggle the progress beeper on ( ) and off

( ).

4. Press A to exit the setting screen.

x You can also perform steps 1 and 2 of the above procedure whenever you need

to view the current auto-repeat and progress beeper settings.

E-24

To configure the countdown timer

1. While the countdown start time is on the display in

the Countdown Timer Mode, hold down A until the

current countdown start time starts to flash, which

indicates the setting screen.

x If the countdown start time is not displayed, use the

procedure under “To perform a countdown timer

operation” (page E-26) to display it.

2. Press

C to move the flashing in the sequence shown below to select other

settings.

Start Time Auto-repeat Progress Beeper

CC

C

l

l

l

l

l

l

l

l

l

l

l

l

E-23

Countdown End Beeper

The countdown end beeper lets you know when the countdown reaches zero.

x When the progress beeper is turned off, the countdown end beeper sounds for

about 10seconds, or until you press any button to stop it.

x When the progress beeper is turned on, the countdown end beeper sounds for

about one second.

Progress Beeper

When the progress beeper is turned on, the watch uses beeps to signal countdown

progress as described below.

x Starting from five minutes before the end of the countdown, the watch emits four

short beeps at the top of each countdown minute.

x 30seconds before the end of the countdown, the watch emits four short beeps.

x The watch emits a short beep for each of the last 10seconds of the countdown.

x If the countdown start time is six minutes or greater, the watch emits a short beep

for each second of the final 10seconds before the five-minute point is reached.

Four short beeps are emitted to signal when the five-minute point is reached.

E-22

x See “To configure the countdown timer” on page E-24 for information about setting

up the timer.

Auto-repeat

When auto-repeat is turned on, the countdown automatically restarts from the

countdown start time when it reaches zero. If left running, the countdown is

repeated a total of eight times, after which it stops automatically.

When auto-repeat is turned off, the countdown stops when it reaches zero and the

display shows the original countdown start time.

x Pressing D while an auto-repeat countdown is in progress pauses the current

countdown. You can resume the auto-repeat countdown by pressing D, or you

can press A to reset to the countdown time starting value.

Countdown Timer Beeper Operations

The watch beeps at various times during a countdown so you can keep informed

about the countdown status without looking at the display. The following describes

the types of beeper operations the watch performs during a countdown.

E-21

Countdown Timer

The countdown timer can be set within a range of

one minute to 60minutes. An alarm sounds when the

countdown reaches zero. The countdown timer also has

an auto-repeat feature and a progress beeper that signals

the progress of the countdown.

To enter the Countdown Timer Mode

Use C to select the Countdown Timer Mode as shown

on page E-8.

Configuring the Countdown Timer

The following are the settings you should configure

before actually using the countdown timer.

Countdown start time; Auto-repeat on/off; Progress

beeper on/off

Seconds

Minutes

E-20

To specify standard time or daylight saving time (DST) for a city

1. In the World Time Mode, use D (East) to display the

city code (time zone) whose Standard Time/Daylight

Saving Time setting you want to change.

2. Hold down A for about two seconds.

x This toggles the city code you selected in step1

between Daylight Saving Time (DST indicator

displayed) and standard time (DST indicator not

displayed).

x Using the World Time Mode to change the DST setting of the city code that is

selected as your Home City also will change the Timekeeping Mode time DST

setting.

x Note that you cannot switch between standard time/daylight saving time (DST)

while

GMT is selected as the World Time City.

x The standard time/daylight saving time (DST) setting affects only the currently

selected time zone. Other time zones are not affected.

DST indicator

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Casio Baby-G BGA-255-5AER Horloge. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Casio. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Casio Baby-G BGA-255-5AER Horloge in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Casio Horloges
Meer handleidingen voor Horloges

Veelgestelde vragen over Casio Baby-G BGA-255-5AER Horloge

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Casio Collection WS-1700H-5AVEF Horloge

Handleiding

Casio Collection W-219HD-1AVEF Horloge

Handleiding

Casio G-Shock DW-B5600G-1ER Horloge

Handleiding

Casio Edifice EFV-150L-1AVUEF Horloge

Handleiding

Casio G-Shock DW-6900U-1ER Horloge

Handleiding

Casio Collection W-219HB-3AVEF Horloge

Handleiding

Casio G-Shock GBX-100TT-8ER Horloge

Handleiding

Casio Collection LWS-2200H-8AVEF Horloge

Gerelateerde categorieën