Handleiding Casio Baby-G BGD-525-7ER Horloge

Handleiding

Operation Guide 3290

L-1

City Code Table

E-28

Alarms: 5 daily alarms (4 one-time alarms: 1 snooze alarm); Hourly Time Signal

Illumination: EL Backlight (electro-luminescent panel); Selectable illumination

duration

Other: Button operation tone on/off

Battery: One lithium battery (Type: CR1616)

Approximately 3 years on type CR1616 (assuming alarm operation 10 seconds per

day, and one illumination operation 1.5 seconds per day)

The above battery life is shortened by illumination as shown below.

x 5 illumination operations (10 seconds) per day: approximately 2.5 years

x 10 illumination operations (20 seconds) per day: approximately 1.7 years

E-27

Specifi cations

Accuracy at normal temperature: ±30 seconds a month

Timekeeping: Hour, minutes, seconds, a.m. (A)/p.m. (P), day, day of the week

Time format: 12-hour and 24-hour

Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2099

Other: Home City code (can be assigned one of 48 city codes); Daylight Saving

Time (summer time)/Standard Time

World Time: 48 cities (29 time zones)

Other: Daylight Saving Time/Standard Time

Stopwatch

Measuring unit: 1/100 second

Measuring capacity: 59' 59.99''

Measuring modes: Elapsed time, split time, two fi nishes

Countdown Timer

Measuring unit: 1 second

Input range: 1 minute to 24 hours (1-minute increments and 1-hour increments)

E-26

Initial Screens

When you enter the World Time or Alarm Mode, the data you were viewing when you

last exited the mode appears fi rst.

World Time

x The seconds count of the World Time is synchronized with the seconds count of the

Timekeeping Mode.

x All World Time Mode times are calculated from the current Home City time in the

Timekeeping Mode using UTC time differential values.

x The UTC differential is a value that indicates the time difference between a

reference point in Greenwich, England and the time zone where a city is located.

x The letters “UTC” is the abbreviation for “Coordinated Universal Time”, which is the

world-wide scientifi c standard of timekeeping. It is based upon carefully maintained

atomic (cesium) clocks that keep time accurately to within microseconds. Leap

seconds are added or subtracted as necessary to keep UTC in sync with the Earth’s

rotation.

E-25

x Holding down C to turn the button operation tone on or off also causes the watch’s

current mode to change.

x The mute indicator is displayed in all modes when the button operation tone is

turned off.

Auto Return Features

x If you leave the watch in the Alarm Mode for two or three minutes without performing

any operation, it automatically changes to the Timekeeping Mode.

x If you leave a screen with fl ashing digits or a cursor on the display for two or three

minutes without performing any operation, the watch automatically saves any

settings you have made up to that point and exits the setting screen.

Scrolling

The B and D buttons are used in various modes and setting screens to scroll

through data on the display. In most cases, holding down these buttons during a scroll

operation scrolls at high speed.

E-24

Reference

This section contains more detailed and technical information about watch operation.

It also contains important precautions and notes about the various features and

functions of this watch.

Button Operation Tone

The button operation tone sounds any time you press one

of the watch’s buttons. You can turn the button operation

tone on or off as desired.

x Even if you turn off the button operation tone, the alarm,

Hourly Time Signal, and Countdown Timer Mode alarm

all operate normally.

To turn the button operation tone on and off

In any mode (except when a setting screen is on the

display), hold down C to toggle the button operation tone

on (

not displayed) and off ( displayed).

Mute indicator

E-23

To illuminate the display

In any mode (except when a setting screen is on the display), press B to turn on

illumination.

x You can use the procedure below to select either 1.5 seconds or 3 seconds as the

illumination duration. When you press B, the illumination will remain on for about

1.5 seconds or 3 seconds, depending on the current illumination duration setting.

To specify the illumination duration

1. In the Timekeeping Mode, hold down A until the

seconds start to fl ash, which indicates the setting

screen.

2. While the seconds are fl ashing, press B to toggle the

illumination duration between 1.5 seconds (

) and 3

seconds (

).

3. Press A to exit the setting screen.

E-22

Illumination

This watch has an EL (electro-luminescent) panel that causes the entire display to

glow for easy reading in the dark.

Illumination Precautions

x The electro-luminescent panel that provides illumination

loses power after very long use.

x Illumination may be hard to see when viewed under

direct sunlight.

x The watch may emit an audible sound whenever the

display is illuminated. This is due to vibration of the

EL panel used for illumination, and does not indicate

malfunction.

x Illumination automatically turns off whenever an alarm

sounds.

x Frequent use of illumination runs down the battery.

E-21

To turn the Hourly Time Signal on and off

1. In the Alarm Mode, use D to select the Hourly Time

Signal (

).

2. Press A to toggle it on (

displayed) and off

(

displayed).

x The Hourly Time Signal on indicator is shown on the

display in all modes while the Hourly Time Signal is

turned on.

Hourly time signal on

indicator

On/Off status

E-20

To turn an alarm on and off

1. In the Alarm Mode, use D to select an alarm.

2. Press A to toggle it on (

displayed) and off

(

displayed).

x Turning on a one-time alarm (

through )

displays the alarm on indicator on its Alarm Mode screen.

x Turning on the snooze alarm (

) displays the alarm

on indicator and snooze alarm indicator on the Alarm

Mode snooze alarm screen.

x In all modes, the alarm on indicator is shown for any

alarm that is currently turned on.

x The alarm on indicator fl ashes while the alarm is

sounding.

x The snooze alarm indicator fl ashes during the 5-minute

intervals between alarms.

Alarm on indicator

Snooze alarm indicator

On/Off status

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Casio Baby-G BGD-525-7ER Horloge. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Casio. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Casio Baby-G BGD-525-7ER Horloge in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Casio Horloges
Meer handleidingen voor Horloges

Veelgestelde vragen over Casio Baby-G BGD-525-7ER Horloge

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Casio Sheen SHE-4554PGM-4AUEF Horloge

Handleiding

Casio Pro Trek PRG-340-1ER Horloge

Handleiding

Casio G-Shock GBD-H2000-1AER Horloge

Handleiding

Casio Collection LWS-2200H-1AVEF Horloge

Handleiding

Casio Pro Trek PRW-35-1AER Horloge

Handleiding

Casio Collection WS-1400H-1AVEF Horloge

Handleiding

Casio Collection W-219HB-3AVEF Horloge

Handleiding

Casio Collection MQ-38UC-2A2ER Horloge

Gerelateerde categorieën