Handleiding Casio Baby-G BLX-560VH-1ER Horloge

Handleiding

Operation Guide 3296

E-10

2. Press C to move the flashing in the sequence shown below to select other

settings.

Hour

UTC

Differential

Minutes

Ye a r

DST

Day

Month

Seconds

Flash Alert

3. When the setting you want to change is flashing, use D and B to change it as

described below.

Reset the seconds to

Toggle between Daylight Saving

Time (

) and Standard Time

(

)

Press D.

Press D.

Screen To do this: Do this:

E-11

• See “Daylight Saving Time (DST) Setting” (page E-12) for details about the DST

setting.

• The UTC differential setting range is –12.0 to +14.0, in 0.5-hour units.

• When DST is turned on, the UTC differential setting range is –11.0 to +15.0, in

0.5-hour units.

• For information about Flash Alert, see “Flash Alert” (page E-44).

4. Press A twice to exit the setting screen.

• The day of the week is displayed automatically in accordance with the date (year,

month, and day) settings.

Screen To do this: Do this:

Specify the UTC differential

Change the hour or minutes

Change the year, month or day

Use D (+) and B (–).

Use D (+) and B (–).

Use D (+) and B (–).

E-12

To toggle between 12-hour and 24-hour timekeeping

In the Timekeeping Mode, press D to toggle between 12-hour timekeeping and

24-hour timekeeping.

• With the 12-hour format, the P (PM) indicator appears to the left of the hour digits for

times in the range of noon to 11:59 p.m. and no indicator appears to the left of the

hour digits for times in the range of midnight to 11:59 a.m.

• With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without

any indicator.

• The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is

applied in all other modes.

Daylight Saving Time (DST) Setting

Daylight Saving Time (summer time) advances the time setting by one hour from

Standard Time. Remember that not all countries or even local areas use Daylight

Saving Time.

E-13

To toggle the Timekeeping Mode time between DST and Standard Time

1.In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting

screen.

2. Press C once and the DST setting screen appears.

3. Press D to toggle between Daylight Saving Time

(

displayed) and Standard Time ( displayed).

4. Press A twice to exit the setting screen.

• The DST indicator appears on the Timekeeping, and

Tide/Moon Data screens to indicate that Daylight Saving

Time is turned on. In the case of the Tide/Moon Data

Mode, the DST indicator appears on the Tide Data

screen only.

Home Site Data

Moon age, tide graph data, and Tide/Moon Data Mode data will not be displayed

properly unless Home Site data (UTC differential, longitude and lunitidal interval) is

configured correctly.

DST indicator

On/Off status

E-14

• The lunitidal interval is the time elapsing between the Moon’s transit over a meridian

and the next high tide at that meridian. See “Lunitidal Interval” (page E-43) for more

information.

• This watch displays lunitidal intervals in terms of hours and minutes.

• The “Site/Lunitidal Interval Data List” at the back of this manual provides UTC

differential and longitude information around the world.

• The following is the initial factory default Home Site data (Tokyo, Japan) when you

first purchase the watch and whenever you have the battery replaced. Change these

settings to match the area where you normally use the watch.

UTC differential (+9.0); Longitude (East 140 degrees); Lunitidal interval (5 hours,

20 minutes)

E-15

To configure Home Site data

1. In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting

screen.

2. Press C twice to display the UTC differential setting

screen, and confirm that the setting is correct.

• If the UTC differential setting is not correct, use D (+)

and B (–) to change it.

3. Press A to display the longitude value setting screen.

4. Press C to move the flashing in the sequence shown

below to select other settings.

Lunitidal Interval

Hours

Lunitidal Interval

Minutes

Longitude

(East/West)

Longitude

Value

Longitude value

Longitude (East/West)

E-16

5. While the setting you want to change is flashing, use D and B to change it as

described below.

Setting

Longitude Value

Longitude

(East/West)

Lunitidal Interval

Hours, Minutes

Button Operations

Use D (+) and B (–) to change the setting.

• You can specify a value from 0° to 180°, in

1-degree units.

Use D to switch between east longitude (

)

and west longitude ( ).

Use D (+) and B (–) to change the setting.

Screen

6. Press A to exit the setting screen.

E-17

Tide/Moon Data

Tide/Moon data lets you view the moon age for a

particular date, and tidal movements for a particular date

and time for your Home Site.

• When you enter the Tide/Moon Data Mode, the data for

6:00 a.m. on the current date appears first.

• If you suspect that the Tide/Moon data is not correct for

some reason, check the Timekeeping Mode data

(current time, date, and Home Site settings), and make

changes as required.

• See “Tide Graph” (page E-42) for information about the

tide graph.

• All of the operations in this section are performed in the

Tide/Moon Data Mode, which you enter by pressing C

(page E-7).

Month – Day

Tide graph

Time

E-18

Tide/Moon Data Screens

In the Tide/Moon Data Mode, press A to toggle between the Tide Data screen and

the Moon Data screen.

Press A.

Moon Data ScreenTide Data Screen

▲

▲

Time

Moon age

Tide graph

Month – Day

E-19

• While the Tide Data screen is displayed, press D to advance to the next hour.

• While the Moon Data screen is displayed, press D to advance to the next day.

• You also can specify a particular date (year, month, day) to view its tide data and

moon data. See “To specify a date” for more information.

• When you enter the Tide/Moon Data Mode, the screen (tide data or moon data) that

was displayed the last time you exited the mode appears first.

To specify a date

1. In the Tide/Moon Data Mode, hold down A until the

year setting starts to flash, which indicates the setting

screen.

2. Press C to move the flashing in the sequence shown

below to select the other settings.

Month DayYear

Month – DayYear

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Casio Baby-G BLX-560VH-1ER Horloge. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Casio. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Casio Baby-G BLX-560VH-1ER Horloge in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Casio Horloges
Meer handleidingen voor Horloges

Veelgestelde vragen over Casio Baby-G BLX-560VH-1ER Horloge

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Casio Edifice ECB-40MP-1AEF Horloge

Handleiding

Casio Baby-G BA-110X-7A1ER Horloge

Handleiding

Casio Collection MTP-M305M-8AVER Horloge

Handleiding

Casio G-Shock GA-2140RX-7AER Horloge

Handleiding

Casio Pro Trek PRW-35-1AER Horloge

Handleiding

Casio G-Shock GA-B001-1AER Horloge

Handleiding

Casio Collection W-219HD-1AVEF Horloge

Handleiding

Casio G-Shock MTG-B3000PRB-1AER Horloge

Gerelateerde categorieën