Handleiding Casio Collection AEQ-110W-1AVEF Horloge

Handleiding

Operation Guide 5479

E-29

Alarms

You can set three independent Daily Alarms. When an

alarm is turned on, the alarm tone sounds when the alarm

time is reached. One of the alarms is a snooze alarm,

while the other two are one-time alarms.

You can turn on an Hourly Time Signal that causes the

watch to beep twice every hour on the hour.

x There are four screens in the Alarm Mode. Two are for

one-time alarms (indicated by numbers AL1 and AL2),

one is for a snooze alarm (indicated by SNZ

), and one is

for the Hourly Time Signal (indicated by SIG).

x All of the operations in this section are performed in the

Alarm Mode, which you enter by pressing C (page E-7).

AM indicator

Alarm time

(Hour : Minutes)

E-28

To toggle a city code time between Standard Time and Daylight Saving Time

1. In the World Time Mode, use D to display the city

code whose Standard Time/Daylight Saving Time

setting you want to change.

2. Hold down A until the DST On/Off setting of the world

time starts to fl ash, which indicates the setting screen.

3. Press D to toggle between Daylight Saving Time (ON

displayed) and Standard Time (OFF displayed).

4. Press A to exit the setting screen.

x The DST indicator appears on the World Time Mode display to indicate that

Daylight Saving Time is turned on.

x The above operation toggles all World Time city codes between Daylight Saving

Time and Standard Time. Note that you cannot make settings for individual city

codes.

E-27

4. While a setting is fl ashing, use D and B to change it.

x Pressing D and B at the same time while any World Time setting is fl

ashing

causes the displayed time to change to the same setting as the current

Timekeeping Mode time.

x While DST On/Off setting is selected (fl ashing), press D to toggle between

Daylight Saving Time (ON

) and Standard Time (OFF).

x While the hour or minutes setting is selected (fl ashing), use D (+) and B (–) to

change it.

5.

Press A to exit the setting screen.

To view the time in another city code

In the World Time Mode, press D to scroll through city codes.

E-26

x If your location is not included in the preset city codes, select the preset city code

that is in the same time zone as your location.

x For full information on city codes, see the “City Code Table” at the back of this

manual.

To set the World Time

1. In the World Time Mode, press D to scroll through

city codes.

2.

Hold down A until the DST On/Off setting of the

world time starts to fl ash, which indicates the setting

screen.

3. Press C to move the fl ashing in the sequence shown

below to select the other settings.

DST Hour Minutes

CC

C

E-25

World Time

World Time digitally displays the current time in 30cities

(29time zones) around the world.

x All of the operations in this section are performed in

the World Time Mode, which you enter by pressing C

(page E-6).

World Time

The time settings of the Timekeeping Mode and the

World Time Mode are independent of each other, so

you must make separate settings for each. This watch

is preset with a number of city codes, each of which

represents the time zone where that city is located.

x Whenever you change the time setting for any city in the World Time Mode, the

settings of all other cities are changed accordingly.

City code

Current time for the

selected city code

E-24

3. Press B and D at the same time to delete the record.

x CLR appears to indicate that the record is being deleted. After the record is

deleted, the cursor appears on the display, ready for input.

4. Input data or press A to return to the Telememo record screen.

E-23

To edit a Telememo record

1. In the Telememo Mode, use D to scroll through the records and display the one

you want to edit.

2. Hold down A until the fl ashing cursor appears on the display.

3. Use C to move the fl ashing to the character you want to change.

4. Use B and D to change the character.

x For details on inputting characters, see “To create a new Telememo record”

(step 3 for name input and 7 for number input).

5. After making the changes that you want, press A to store them and return to the

Telememo record screen.

To delete a Telememo record

1.

In the Telememo Mode, use D to scroll through the records and display the one

you want to delete.

2. Hold down A until the fl ashing cursor appears on the display.

E-22

To recall Telememo records

In the Telememo Mode, press D (+) to scroll through Telememo records on the

display.

x Only name data appears when you scroll through Telememo records.

x Press A to toggle the screen between the name and number fi

elds.

Name

Number

A

x The name and number scroll from right to left on the display. A separator (

s

) is

inserted between the last character and fi rst character of the data.

x Pressing D while the last Telememo record is on the display causes the new data

screen to appear.

E-21

10. Press A to store your data and return to the Telememo record screen (without

the cursor).

x After you press A to store data, the name fl

ashes for about one second to

indicate that records are being sorted.

x Note that a record must have something input in the name fi eld, otherwise you

will not be able to store it.

E-20

x The name fi eld has spaces for eight characters, so you must press C to move

the past the 8th character in order to get to the number fi eld.

x The number fi eld has spaces for 16 digits. Pressing C until the cursor moves

past the 16th digit causes it to jump back to the fi

rst character of the name fi eld.

7. Use D and B to change the character at the cursor position in the number

fi eld. The character changes in the following sequence.

(space) 0 to 9 (

+

)

–

DD DDD

B

D

BB BBB

8. When the character you want is at the cursor position, press C to move the

cursor to the right.

9. Repeat steps 7 and 8 until you complete number input.

x You can input up to 16 digits for the number.

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Casio Collection AEQ-110W-1AVEF Horloge. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Casio. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Casio Collection AEQ-110W-1AVEF Horloge in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Casio Horloges
Meer handleidingen voor Horloges

Veelgestelde vragen over Casio Collection AEQ-110W-1AVEF Horloge

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Casio Collection MQ-38UC-2A1ER Horloge

Handleiding

Casio G-Shock GA-B2100-2AER Horloge

Handleiding

Casio Collection MQ-38UC-2A2ER Horloge

Handleiding

Casio G-Shock DW-B5600G-1ER Horloge

Handleiding

Casio Collection MTP-B145D-9AVEF Horloge

Handleiding

Casio Collection WS-1300H-1AVEF Horloge

Handleiding

Casio G-Shock GM-2100WS-7AER Horloge

Handleiding

Casio Collection MWD-110H-1AVEF Horloge

Gerelateerde categorieën