Handleiding Casio Collection LW-203-1BVEF Horloge

Handleiding

Operation Guide 3455

E-19

Using the Stopwatch

The stopwatch measures elapsed time, split times, and two finishes.

x The measurement range of the stopwatch is 23hours, 59minutes, 59.99seconds.

x A stopwatch continues to run, restarting from zero after it reaches its limit, until

you stop it.

Hour

Mode indicator

Second

Minute

1/100 Second

E-18

To stop the alarm

Press any button.

To test the alarm

In the Alarm Mode, hold down C to sound the alarm.

E-17

To turn an alarm and the Hourly Time Signal on and off

In the Alarm Mode, press C to cycle through on and off

settings as shown below.

Both off

C

C

Both on

Daily alarm only

C

Hourly Time Signal

only

C

Hourly time signal on

indicator

Alarm on indicator

E-16

To set an alarm time

1. Hold down A until the current alarm time hour digits

start to flash.

x ALM appears on the display, indicating that alarm

setting is enabled.

2. Press B to move the flashing between the hour and

the minute digits.

x The selected digits are those that are flashing.

3. Use C to change the hour and minute settings.

x When setting the alarm time using the 12-hour

format, take care to set the time correctly as a.m. (no

indicator) or p.m. (P indicator).

4. Press A to exit the setting mode.

Alarm on indicator

E-15

Using the Alarm

When a daily alarm is turned on, an alarm tone will sound

for about 10seconds each day when the time in the

Timekeeping Mode reaches the preset alarm time.

You can also turn on an Hourly Time Signal, which will

cause the watch to beep twice every hour on the hour.

x The P (PM) and 24 indicators are not displayed with the

current (Timekeeping Mode) time at the top of the Alarm

Mode screen.

To enter the Alarm Mode

Use B to select the Alarm Mode as shown on page E-8.

Mode indicator

Timekeeping Mode

time

(Hour : Minutes)

Alarm time

(Hour : Minute)

E-14

Note

x Resetting the seconds to 00 while the current count is in the range of 30 to

59causes the minutes to be increased by 1.

x The watch’s built-in full automatic calendar makes allowances for different month

lengths and leap years. Once you set the date, there should be no reason to

change it except after you have the watch’s battery replaced.

To select 12-hour or 24-hour timekeeping

In the Timekeeping Mode, press C to toggle between the 12-hour timekeeping and

24-hour timekeeping formats.

x The 24 indicator is displayed while the 24-hour format is selected, while the PM

indicator (P) is displayed while the 12-hour format is selected.

x The P (PM) and 24 indicators are not displayed with the current (Timekeeping

Mode) time at the top of the Alarm Mode and Dual Time Mode screens.

x The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is

applied in all other modes.

E-13

3. When the timekeeping setting you want to change is flashing, perform the

operation described below.

Screen To do this: Do this:

Reset the seconds to 00

Press C.

Change the hour or minute

Press C to increase or

advance the flashing setting.

Change the year

Change the month or day

Change the day of the week

4. Press A to exit the setting mode.

E-12

To set the time and date

1. In the Timekeeping Mode, hold down A until the seconds digits start to flash.

2. Press B to move the flashing in the sequence shown below to select the other

settings.

Seconds

B

Hour

B

Minute

B

Year

B

B

Day of the week

B

Day

B

Month

E-11

Timekeeping

Use the Timekeeping Mode to set and view the current time and date.

PM indicator

Day of week

Second

Hour : Minute

Month-Day

E-10

General Functions (All Modes)

The functions and operations described in this section can be used in all modes.

Auto Return

If you do not perform any operation for about one or two minutes while configuring

settings (setting flashing on the display) in any mode, the watch will exit the setting

operation and return to normal display.

Scrolling

Use the C button in the setting mode to scroll through available settings. In most

cases, holding down C when scrolling will scroll at high speed.

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Casio Collection LW-203-1BVEF Horloge. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Casio. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Casio Collection LW-203-1BVEF Horloge in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Casio Horloges
Meer handleidingen voor Horloges

Veelgestelde vragen over Casio Collection LW-203-1BVEF Horloge

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Casio Edifice EFV-150L-1AVUEF Horloge

Handleiding

Casio G-Shock GBX-100TT-8ER Horloge

Handleiding

Casio Collection MTP-E700D-1EVEF Horloge

Handleiding

Casio G-Shock GA-B2100-2AER Horloge

Handleiding

Casio Edifice ECB-40PB-1AEF Horloge

Handleiding

Casio G-Shock MTG-B3000PRB-1AER Horloge

Handleiding

Casio Collection WS-1700H-5AVEF Horloge

Handleiding

Casio G-Shock GA-B001-1AER Horloge

Gerelateerde categorieën