Handleiding Casio Collection MWD-100H-9AVEF Horloge

Handleiding

Operation Guide 3487

E-19

Stopwatch

The stopwatch lets you measure elapsed time, split times,

and two finishes.

x The display range of the stopwatch is 23 hours,

59minutes, 59.99 seconds.

x The stopwatch continues to run, restarting from zero

after it reaches its limit, until you stop it.

x An ongoing elapsed time measurement operation

will continue internally even if you change to another

mode. However, if you exit the Stopwatch Mode while

a split time is displayed, the split time will not be

displayed when you return to the Stopwatch Mode.

x All of the operations in this section are performed in

the Stopwatch Mode, which you enter by pressing C

(page E-5).

Minutes

Seconds

Hours

1/100 second

E-18

To turn auto-repeat on and off

1. In the Countdown Timer Mode, hold down A until the

hours setting of the countdown start time starts to flash,

which indicates the setting screen.

2. Press B to toggle auto-repeat on (

displayed) and off

(

not displayed).

x Note that pressing B in the above operation also

turns on the backlight.

x When the end of the countdown is reached while auto-

repeat is on, the alarm sounds, but the countdown

restarts from the beginning without stopping. You

can stop the countdown by pressing

D

and manually

reset to the start time by pressing

A

.

x The auto-repeat indicator appears in the Countdown

Timer Mode only.

Auto-repeat indicator

E-17

x The countdown timer measurement operation continues even if you exit the

Countdown Timer Mode.

x Press D while a countdown operation is in progress to pause it. Press D

again to resume the countdown.

x To completely stop a countdown operation, first pause it (by pressing D), and

then press A. This returns the countdown time to its starting value.

To set the countdown start time

1. In the Countdown Timer Mode, hold down A until the

hours setting of the countdown start time starts to flash,

which indicates the setting screen.

2. Press C to move the flashing between the hours and

minutes settings.

3. While a setting is flashing, use D to increase it.

x To set the starting value of the countdown time to

24 hours, set 0:00.

4. Press A to exit the setting screen.

E-16

Countdown Timer

The countdown timer can be set within a range of one

minute to 24 hours. An alarm sounds when the countdown

reaches zero.

x You can also select auto-repeat, which automatically

restarts the countdown from the original value you set

whenever zero is reached.

x All of the operations in this section are performed

in the Countdown Timer Mode, which you enter by

pressing C (page E-5).

To use the countdown timer

Press D while in the Countdown Timer Mode to start the

countdown timer.

x When the end of the countdown is reached and auto-repeat is turned off, the

alarm sounds for 10 seconds or until you stop it by pressing any button. The

countdown time is automatically reset to its starting value after the alarm stops.

Minutes

Seconds

Hours

E-15

To select the operation of Alarm 1

1. In the Alarm Mode, use D to select Alarm 1.

2. Press A to cycle through the available settings in the sequence shown below.

Snooze on indicator (SNZ) and Alarm 1 on indicator

AAA

Alarm on Snooze

alarm on

Alarm off

x The snooze on indicator (SNZ) and Alarm 1 on indicator are displayed in all

modes.

x The snooze on indicator (SNZ) flashes during the 5-minute intervals between

alarms.

x The alarm indicator (Alarm 1 on and/or snooze on) flashes while the alarm is

sounding.

E-14

To turn Alarms 2 through 5 and the Hourly Time Signal on and off

1. In the Alarm Mode, use D to select alarm number 2

through 5, or the Hourly Time Signal (:00).

2. Press A to toggle it on and off.

x The on/off status of Alarms 2 through 5 and the Hourly

Time Signal is shown by indicators.

x The alarm on indicators and Hourly time Signal on

indicator are displayed in all modes.

x While an alarm is sounding, the applicable alarm on

indicator flashes on the display.

Hourly time signal on

indicator

Alarm on indicator

E-13

Alarm Operation

The alarm tone sounds at the preset time for 10 seconds, regardless of the mode

the watch is in. In the case of the snooze alarm, the alarm operation is performed a

total of seven times, every five minutes, until you turn the alarm off or change it to a

one-time alarm (page E-14).

x To stop the alarm tone after it starts to sound, press any button.

x Performing any one of the following operations during a 5-minute interval

between snooze alarms cancels the current snooze alarm operation.

Displaying the Timekeeping Mode setting screen (page E-6)

Displaying the alarm 1 setting screen (page E-11)

To test the alarm

x In the Alarm Mode, hold down D to sound the alarm.

E-12

3. Press C to move the flashing in the sequence shown below to select other

settings.

C

Hour Minutes Day

CC

Month

C

4. While a setting is flashing, press D to increase it.

x To set an alarm that does not include a month (Daily alarm, Monthly alarm),

set – for the month. Press D until the – mark appears (between 12 and 1)

while month setting is flashing.

x To set an alarm that does not include a day (Daily alarm, 1-Month alarm), set

– – for the day. Press D until the – – mark appears (between the end of the

month and 1) while the day setting is flashing.

x When setting the alarm time using the 12-hour format, take care to set the

time correctly as a.m. or p.m. (P indicator).

5. Press A to exit the setting screen.

E-11

To set an alarm time

1. In the Alarm Mode, use D to scroll through the alarm

screens until the one whose time you want to set is

displayed.

DD

D

–1 –2 –3

:00 –4–5

DD

D

x Alarm 1 has a snooze feature.

x The snooze alarm operation repeats every five minutes.

2. After you select an alarm, hold down A until the hour setting of the alarm time

starts to flash, which indicates the setting screen.

x This operation automatically turns on the alarm.

E-10

Alarm Types

The alarm type is determined by the settings you make, as described below.

x Daily alarm

Set the hour and minutes for the alarm time. This type of setting causes the alarm to

sound everyday at the time you set.

x Date alarm

Set the month, day, hour and minutes for the alarm time. This type of setting causes

the alarm to sound at the specific time, on the specific date you set.

x 1-Month alarm

Set the month, hour and minutes for the alarm time. This type of setting causes the

alarm to sound everyday at time you set, only during the month you set.

x Monthly alarm

Set the day, hour and minutes for the alarm time. This type of setting causes the

alarm to sound every month at time you set, on the day you set.

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Casio Collection MWD-100H-9AVEF Horloge. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Casio. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Casio Collection MWD-100H-9AVEF Horloge in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Casio Horloges
Meer handleidingen voor Horloges

Veelgestelde vragen over Casio Collection MWD-100H-9AVEF Horloge

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.