Handleiding Casio Collection W-753D-1AVES Horloge

Handleiding

Operation Guide 2926

2

To determine your bearings

1. Enter the Bearing Mode.

• This displays the current solar azimuth value in accordance with the current

Timekeeping Mode data (time, date, Home Site data).

2. Find the same value on the bezel as the angle value displayed for the solar azimuth

on the Bearing Mode screen.

3. Position the watch so the value you found in step 2 is pointing at the sun.

4. The 12 o’clock position of the watch should now be pointed north.

• Note that the bearings produced by the Bearing Mode are intended for general

reference only.

North

Bezel

Moon/Tide Data

Moon/tide data lets you view the Moon age and Moon

phase for a particular date, and tidal movements for a

particular date and time for the Home Site.

• If you suspect that the Moon/tide data is not correct for

some reason, check the Timekeeping Mode data

(current time, date, and Home Site settings), and make

changes as required.

• See “Moon Phase Indicator” for information about the

Moon phase indicator and “Tide Graph” for information

about the tide graph.

• All of the operations in this section are performed in the

Moon/Tide Data Mode, which you enter by pressing C.

Moon phase indicator

Moon age

Tide graph

Moon/Tide Data Screens

Each press of A in the Moon/Tide Data Mode toggles between the Moon Data

screen and the Tide Data screen.

• When you enter the Moon/Tide Data Mode, the data that appears first is the Moon

data (Moon age and Moon phase indicator) for the current date as kept by the

Timekeeping Mode.

▲

▲

Press A.

Tide Data Screen

Moon Data Screen

Tide gragh

Time

Moon age

Moon phase indicator

Year Month – Day

To view the Moon data for a particular date

While the Moon Data screen is displayed in the Moon/Tide Data Mode, use D (+) and

B (–) to display the date whose Moon data you want to view.

• You can select any date from 2000 to 2039.

To view tide data for a particular time

1. While the Moon Data screen is displayed in the Moon/Tide Data Mode, use D (+)

and B (–) to display the date whose tide data you want to view.

2. Press A to switch to the Tide Data screen.

• The initial screen shows the tide graph for 6:00 AM.

3. Specify the time for which you want to display tide data.

• Use D (+) and B (–) to change the time in one-hour steps.

Countdown Timer

The countdown timer can be set within a range of one

minute to 60 minutes. An alarm sounds when the

countdown reaches zero. The countdown timer has two

modes: auto-repeat and elapsed time, and a progress

beeper signals the progress of the countdown. All of this

makes the countdown timer a valuable tool for timing the

start of a yacht race.

• All of the operations in this section are performed in the

Countdown Timer Mode, which you enter by pressing

C.

Configuring Countdown Timer Settings

The following are the settings you should configure before actually using the

countdown timer.

Countdown start time and reset time

Timer mode (auto-repeat, elapsed time)

Progress beeper on/off

Timekeeping Mode time

Minutes

Seconds

• See “To configure countdown timer settings” for information about setting up the

timer.

Reset Time

Yo u can set a “reset time,” which is a kind of alternate countdown start time you can

recall with the press of a button any time a countdown operation is in progress.

Timer Mode

The countdown timer gives you a choice of two modes: auto-repeat and elapsed time.

Auto-repeat

Auto-repeat automatically restarts the countdown from the countdown start time

whenever zero is reached.

• Auto-repeat mode is best when timing the starts of match races.

• Even if you start a countdown operation from the reset time, the countdown

automatically restarts from the countdown start time whenever it reaches zero.

• Auto repeat timing repeats up to seven times.

Elapsed Time

When the end of the countdown is reached in the elapsed time mode, the timer

automatically switches to an elapsed time measurement operation.

• The elapsed time mode is best when timing the speed of yachts during ocean races.

• The elapsed time operation is performed in one-second increments up to 99 hours,

59 minutes, 59 seconds.

Countdown Timer Beeper Operations

The watch beeps at various times during a countdown so you can keep informed

about the countdown status without looking at the display. The following describes the

types of beeper operations the watch performs during a countdown.

Countdown End Beeper

The watch beeps each second of the final 10 seconds before a countdown reaches

zero, and at zero. The first five beeps (seconds 10 through 6) are higher pitched than

the final five beeps (seconds 5 through 1). The watch emits a longer beep to signal

when the countdown reaches zero.

• The countdown end beeper always sounds, regardless of the on/off status of the

progress beeper.

Progress Beeper

The progress beeper actually includes two beepers: a reset time beeper and a reset

period progress beeper.

• The reset time beeper and reset period progress beeper sound only while the

progress beeper is turned on.

Reset Time Beeper

The reset time beeper is similar to the countdown end beeper. When the progress

beeper is turned on, the watch beeps each second of the final 10 seconds before the

countdown reaches the reset time.

Reset Period Progress Beeper

The reset period is the portion of the countdown between the reset time and zero.

When the progress beeper is turned on, the watch emits four short beeps at the top of

each minute during the reset period, and 30 seconds before the end of the

countdown.

Countdown Timer Examples

Countdown start time: 10 minutes; Reset time: 5 minutes; Timer mode: Auto-repeat;

Progress beeper: On

10'00"

Start Time Reset Time

0'00"1'00" 0'30"2'00"3'00"4'00"5'00"

Reset Period

Reset Period Progress Beeper

Countdown

End Beeper

Reset Time Beeper

Countdown start time: 10 minutes; Reset time: 5 minutes; Timer mode: Elapsed time;

Progress beeper: Off

10'00"

0'00"5'00"

Countdown

End Beeper

Elapsed time

measurement

Start Time Reset Time

To configure countdown timer settings

1.While the countdown start time is on the display in the

Countdown Timer Mode, hold down A until the

countdown start time setting starts to flash, which

indicates the setting screen.

• If the countdown start time is not displayed, use the

procedure under “To use the countdown timer” to

display it.

2.Press C to move the flashing in the sequence shown

below to select other settings.

Start

Time

Reset

Time

Timer

Mode

Progress

Beeper

3. When the setting you want to change is flashing, use D and B to change it as

described below.

|

|

|

|

|

|

|

|

|

|

|

|

|

|

|

Setting

Start Time

Reset Time

Timer Mode

Progress

Beeper

Screen Button Operations

Use D (+) and B (–) to change the setting.

• You can set a start time in the range of 1 to 60 minutes

in 1-minute increments.

Use D (+) and B (–) to change the setting.

• You can set a reset time in the range of 1 to 5 minutes

in 1-minute increments.

Press D to toggle between the auto-repeat mode (ON)

and the elapsed time mode (OFF).

• An auto-repeat indicator (

) appears when the auto-

repeat mode is selected.

Press D to toggle progress beeper on (ON) and off (OFF).

• A progress beeper indicator (

) appears when this

setting is turned on.

4. Press A to exit the setting screen.

• The reset time setting must be less than the countdown start time setting.

|

|

|

|

|

|

|

|

|

|

|

|

|

|

|

To use the countdown timer

In the Countdown Timer Mode, press D to start the

countdown timer.

• The countdown timer measurement operation continues

even if you exit the Countdown Timer Mode.

• The table below describes button operations you can

perform to control countdown operations.

To do this:

Stop the countdown operation

Resume a stopped countdown operation

Display the countdown start time

Stop the countdown operation and display the reset time

Start the countdown from the displayed reset time

Do this:

Press D.

Press D again.

While the countdown is

stopped, press B.

Press B.

Press D.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Casio Collection W-753D-1AVES Horloge. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Casio. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Casio Collection W-753D-1AVES Horloge in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Casio Horloges
Meer handleidingen voor Horloges

Veelgestelde vragen over Casio Collection W-753D-1AVES Horloge

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Beoordeling

Gerelateerde producten

Handleiding

Casio Vintage AQ-800EG-9AEF Horloge

Handleiding

Casio G-Shock AWG-M100A-1AEF Horloge

Handleiding

Casio Sheen SHE-3047PG-5AER Horloge

Handleiding

Casio G-Shock GD-400GB-1B2EF Horloge

Handleiding

Casio AQ-230GA-9DMQEF Horloge

Handleiding

Casio Timeless Collection MTP-1375PD-3AVEF Horloge

Handleiding

Casio Timeless Collection W-735H-1BVEF Horloge

Handleiding

Casio G-Shock GX-56MF-1ER Horloge

Gerelateerde categorieën