Handleiding Casio Collection WS-1200H-1AVEF Horloge

Handleiding

Operation Guide 3485

E-19

x The fishing level indicator changes in accordance with the Moon data.

x In the Timekeeping Mode, the FISH indicator flashes whenever the fishing level

of the current time is 4 or 5.

To view the current fishing level and Moon data

In the Fishing/Moon Mode, press

A

to toggle between the fishing level screen and

the Moon Data screen.

x The fishing level indicator shows the level for the displayed time. The initial

fishing level screen shows the level for 6:00 a.m. The Moon data screen shows

the Moon age and Moon phase for the current date.

E-18

Fishing Level Indicator

The fishing level indicator shows the relative favorability of a fishing time (calculated

in accordance with Moon transit and phase) as shown in the table below.

Level 5 Level 4 Level 3 Level 2 Level 1

Moon Transit

Moon Phase

Upper

Lower

West East Other

New moon*

Full moon

Level 5 Level 4 Level 3

First quarter

Last quarter

Level 4 Level 3 Level 2

Other Level 3 Level 2 Level 1

* These indicators

actually appear

during Moon ages

13.0 to 16.6 (Full

Moon and phase

immediately

preceding it) and

27.7 to 1.8 (New

Moon and phase

immediately

preceding it).

E-17

Fishing/Moon Mode

The Fishing/Moon Mode displays an indicator that shows,

as one of five levels, the suitability of a specific date and

time (minute 00 to minute 59 of a particular hour) for

fishing. This mode also can be used to display Moon Data

(Moon age and Moon phase) for a specific date.

x If you doubt that the fishing level indicator or current

Moon data is wrong for some reason, check the

current Timekeeping Mode settings (time, date, and

Home Site), and correct them if required.

x See “Moon Phase Indicator” (page E-40) for

information about the Moon phase indicator.

x All of the operations in this section are performed in

the Fishing/Moon Mode, which you enter by pressing

C

(page E-6).

Year Month – Day

Fishing level indicator

Time

Moon phase indicator

E-16

To toggle between 12-hour and 24-hour timekeeping

In the Timekeeping Mode, press

D

to toggle between 12-hour timekeeping and

24-hour timekeeping.

x With the 12-hour format, the P (PM) indicator appears to the left of the hour

digits for times in the range of noon to 11:59 p.m. and no indicator appears to

the left of the hour digits for times in the range of midnight to 11:59 a.m.

x With the 24-hour format, times are displayed in the range of 0:00 to 23:59,

without any indicator.

x The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is

applied in all other modes.

x The P indicator is not displayed with the Timekeeping Mode time on the

Countdown Timer Mode and Dual Time Mode screens.

E-15

4. When the setting you want to change is flashing, use

D

and

B

to change it as

described below.

Setting Screen Button Operations

UTC Differential

Use

D

(+) and

B

(–) to change the setting.

x You can specify a value in the range of –12.0 to

+14.0, in 0.5-hour units.

Longitude Value

Use

D

(+) and

B

(–) to change the setting.

x You can specify a value in the range of 0° to 180°,

in 1-degree units.

East Longitude/

West Longitude

Use

D

to switch between east longitude (E) and

west longitude (W).

x When the DST setting is on, the UTC differential can be set in a range of

–11.0 to +15.0 in 0.5-hour units.

5. Press

A

to exit the setting screen.

E-14

To configure Home Site data

1. In the Timekeeping Mode, hold down

A

until the

seconds start to flash, which indicates the setting

screen.

2. Press

A

again to display the UTC differential setting

screen.

3. Press

C

to move the flashing in the sequence shown

below to select other settings.

UTC

Differential

Longitude

Value

East Longitude/

West Longitude

C

C

C

UTC differential

E-13

Home Site Data

Moon phase, the fishing level indicator, and Fishing/Moon Mode data will not

be displayed properly unless Home Site data (UTC differential and longitude) is

configured correctly.

x The UTC differential is a value that indicates the time difference between

a reference point in Greenwich, England and the time zone where a city is

located.

x The letters “UTC” is the abbreviation for “Coordinated Universal Time”,

which is the world-wide scientific standard of timekeeping. It is based upon

carefully maintained atomic (cesium) clocks that keep time accurately to within

microseconds. Leap seconds are added or subtracted as necessary to keep

UTC in sync with the Earth’s rotation.

x The “Site Data List” at the back of this manual provides UTC differential,

latitude, and longitude information around the world.

x The following is the initial factory default Home Site data (Tokyo, Japan) when

you first purchase the watch, and whenever you have the battery replaced.

Change these settings to match the area where you normally use the watch.

UTC differential (+9.0); Longitude (East 140 degrees)

E-12

To toggle the Timekeeping Mode time between DST and Standard Time

1. In the Timekeeping Mode, hold down

A

until the

seconds start to flash, which indicates the setting

screen.

2. Press

C

once to display the DST setting screen.

3. Press

D

to toggle between Daylight Saving Time (On

displayed) and Standard Time (OF displayed).

4. Press

A

twice to exit the setting screen.

x The DST indicator appears on the Timekeeping,

Fishing/Moon, and Alarm Mode screens to indicate

that Daylight Saving Time is turned on. In the case of

the Fishing/Moon Mode, the DST indicator appears on

the fishing level screen only.

On/Off status

DST indicator

E-11

x See “Daylight Saving Time (DST) Setting” below for details about the DST

setting.

x The day of the week is displayed automatically in accordance with the date

(year, month, and day) settings.

Daylight Saving Time (DST) Setting

Daylight Saving Time (summer time) advances the time setting by one hour from

Standard Time. Remember that not all countries or even local areas use Daylight

Saving Time.

E-10

3. When the setting you want to change is flashing, use

B

and

D

to change it as

described below.

Screen To do this: Do this:

Reset the seconds to 00

Press

D

.

Toggle between Daylight Saving Time

(On) and Standard Time (OF)

Press

D

.

Change the hour or minutes

Use

D

(+) and

B

(–).

Change the year

Change the month or day

4. Press

A

twice to exit the setting screen.

x The first press of

A

displays the UTC differential setting screen. Pressing

A

again exits the setting screen.

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Casio Collection WS-1200H-1AVEF Horloge. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Casio. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Casio Collection WS-1200H-1AVEF Horloge in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Casio Horloges
Meer handleidingen voor Horloges

Veelgestelde vragen over Casio Collection WS-1200H-1AVEF Horloge

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Casio G-Shock DW-5040PG-1ER Horloge

Handleiding

Casio Edifice ECB-2200DD-1AEF Horloge

Handleiding

Casio G-Shock DW-6900U-1ER Horloge

Handleiding

Casio G-Shock MTG-B3000PRB-1AER Horloge

Handleiding

Casio G-Shock MRG-B5000R-1DR Horloge

Handleiding

Casio Collection MWD-110H-1AVEF Horloge

Handleiding

Casio G-Shock GA-700BCE-1AER Horloge

Handleiding

Casio Collection WS-1400H-1AVEF Horloge

Gerelateerde categorieën