Handleiding Casio Edifice EQS-500C-1A1ER Horloge

Handleiding

3

Operation Guide 5123

Use 9. D (+) and B (–) to change the m Day setting.

If you want to change the time setting at this time, •

press C and then perform the procedure starting from

step 3 under “To change the current time setting”.

After the settings are the way you want, press

10.

A to

return to the Timekeeping Mode.

The day of the week indicated by the •

n Right Dial

Hand changes automatically in accordance with the

date (year, month, and day).

Note

The watch’s built-in full automatic calendar makes allowances for different month •

lengths and leap years. Once you set the date, there should be no reason to

change it except after you have the watch’s rechargeable battery replaced or after

power drops to Level 3.

Using the Stopwatch

The stopwatch measures elapsed time and split times.

Hand Functions

x Second Hand: Indicates the stopwatch 1/10-second

count.

b Lower Left Dial Hands:

Indicate the stopwatch minutes (short hand) and

seconds (long hand).

n Right Dial Hand:

Indicates the stopwatch 1/100-second count.

30

5@ 6

30

@

6*

To specify standard time or daylight saving time (DST) for a city



6*

Hold down

A for two

seconds



In the World Time Mode, use 1. D to select the city code

whose setting you want to change.

Wait until the •

b Lower Left Dial Hands complete their

move to the time in the currently selected World Time

City. You will not be able to perform step 2 of this

procedure until the hands stop moving.

Hold down 2. A for about two seconds until the watch

beeps. This will cause the n Right Dial Hand to toggle

between DST (daylight saving time) and STD (standard

time).

Note that you cannot switch between • STD (standard

time)/DST (daylight saving time) while UTC is

selected as the World Time City.

Note that the • STD (standard time)/DST (daylight

saving time) setting affects only the currently selected

time zone. Other time zones are not affected.

Swapping your Home City and World Time City

You can use the procedure below to swap your Home City and World Time City. This

capability can come in handy when you frequently travel between two locations in

different time zones.

The following example shows what happens when the Home City and World Time

City are swapped while the Home City originally is TOKYO (TYO) and the World Time

City is NEW YORK (NYC).

Home City World Time City

Before swapping

Tokyo

10:08 p.m.

(Standard time)

New York

9:08 a.m.

(Daylight saving time)

After swapping

New York

9:08 a.m.

(Daylight saving time)

Tokyo

10:08 p.m.

(Standard time)

To swap your Home City and World Time City

In the World Time Mode, use 1. D to select the World Time

City you want.

In this example, you would move the •

x Second Hand

to NEW YORK (NYC) in order to select New York as

the World Time City.

Wait until the •

b Lower Left Dial Hands complete their

move to the time in the currently selected World Time

City. You will not be able to perform step 2 of this

procedure until the hands stop moving.

Hold down 2. B for about three seconds until the watch

beeps.

This will make the World Time City ( • NEW YORK/NYC

in this example) your new Home City. At the same time,

it will change the Home City you had selected prior

to step 2 (TOKYO/TYO in this example), to your new

World Time City

.

After swapping the Home City and World Time City, the •

watch will stay in the World Time Mode. The

x Second

Hand will point to your new World Time City (TOKYO/

TYO in this example).

The •

b Lower Left Dial Hands will indicate the current

time in your new World Time City.

Using the Alarm

When the alarm is turned on, an alarm will sound for about 10 seconds each day

when the time in the Timekeeping Mode reaches the preset alarm time. This is true

even if the watch is not in the Timekeeping Mode.

Hand Functions

x Second Hand:

Indicates the current alarm ON/OFF setting.

b Lower Left Dial Hands:

Indicate the current alarm time setting in 24-hour

format.

n Right Dial Hand: Points to ALM.



@

*



*

@



* 6

@

To perform elapsed time measurement

Use 1. C to move the

n Right Dial Hand to 0.

Now you can perform either of following stopwatch operations.2.

To perform an elapsed time operation

B

B

B B

D

Start Stop (Restart) (Stop) Reset

To pause at a split time

B

D

Normal stopwatch hand movement will

resume automatically after five seconds.

B

D

Start Split Stop Reset

Note

The Stopwatch Mode can indicate elapsed time up to 23 minutes, 59.99 seconds. •

• D button operation (split, reset) is disabled while hands are moving at high speed

following a reset operation and when transitioning from a split time back to normal

elapsed timekeeping.

Once started, stopwatch timing continues until you press • B to stop it, even if you

exit the Stopwatch Mode to another mode and even if timing reaches the stopwatch

limit defined above.

If the stopwatch was not reset after the last elapsed time operation, timing will •

restart from where it was last stopped, and not from 0.

The •

x Second Hand indicates the 1/10-second count for the first 30 seconds

of a stopwatch elapsed time operation. After that, the hand stops at 12 o’clock

position. 1/10-second timing continues internally after the first 30 seconds, and the

x Second Hand will jump to the current value whenever B (Stop) or D (Split) is

pressed.

Though the •

n Right Dial Hand is stopped while an elapsed time measurement

operation is in progress, the watch keeps track of the 1/100-second count

internally. The

n Right Dial Hand will jump to the current 1/100-second reading

whenever you stop the stopwatch or perform a split time operation.

Checking the Current Time in a Different Time Zone

You can use the World Time Mode to view the current time in one of 29 time zones

around the globe. The city that is currently selected in the World Time Mode is called

the “World Time City”.

Hand Functions

x Second Hand:

Indicates the currently selected World Time City.

b Lower Left Dial Hands:

Indicate the current time in the selected World Time

City in 24-hour format.

n Right Dial Hand:

Indicates the current STD (standard time) or DST

(daylight saving time) setting of the currently selected

time zone.

To view the time in another time zone

Use 1. C to move the

n Right Dial Hand to STD or DST.

The •

x Second Hand will move to the city code of the currently selected World

Time City.

Use 2. D to move the

x Second Hand to the city code you want to select as the

World Time City.

The •

b Lower Left Dial Hands will move to the current time in the time zone of

the current city code. At this time, the

z Hour Hand and c Minute Hand will

continue to indicate the current time in the Home City.

For full information on city codes, see the “City Code Table”. •

If you think that the time indicated for the selected time zone is not correct, it •

probably means that there is something wrong with your Home City settings.

Use the procedure under “To configure Home City settings” to correct the Home

City settings.



@

* 6

To change the alarm time setting

Use 1. C to move the

n Right Dial Hand to ALM.

Use 2. D (+) and B (–) to change the alarm time setting.

Each press of either button will move the •

b Lower Left Dial Hands one minute.

Holding down • D or B will start high-speed hand movement in the applicable

direction. To stop high-speed hand movement, press any button.

The alarm always works based on the time kept in the Timekeeping Mode. •

The watch will return to the Timekeeping Mode automatically if you do not •

perform any operation in the Alarm Mode for about two or three minutes.

To turn the alarm on or off

In the Alarm Mode, press A to toggle the alarm on and off. The

x Second Hand will

indicate the current ON/OFF setting.

To stop the alarm

Press any button.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Casio Edifice EQS-500C-1A1ER Horloge. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Casio. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Casio Edifice EQS-500C-1A1ER Horloge in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Casio Horloges
Meer handleidingen voor Horloges

Beoordeling

Veelgestelde vragen over Casio Edifice EQS-500C-1A1ER Horloge

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Casio G-Shock MRG-B5000D-1ER Horloge

Handleiding

Casio Wave Ceptor WV-200RD-1AEF Horloge

Handleiding

Casio G-Shock GM-S110PG-1AER Horloge

Handleiding

Casio W-213-4AVEF Horloge

Handleiding

Casio Sheen SHE-4543GL-8AUEF Horloge

Handleiding

Casio Timeless Collection MTP-M305M-8AVEF Horloge

Handleiding

Casio G-Shock GW-8230B-9AER Horloge

Handleiding

Casio G-Shock GMD-B800-4ER Horloge

Gerelateerde categorieën