Handleiding Casio Edifice EQW-M1100DB-1AER Horloge

Handleiding

Operation Guide 5423

E-19

Japanese Signals Chinese Signal

Fukushima

500 kilometers

Fukuoka/Saga

1,000 kilometers

1,500 kilometers

Changchun500 kilometers

Beijing

Shangqiu

Shanghai

Chengdu

Hong Kong

E-18

Approximate Reception Ranges

UK and German Signals North American Signal

Anthorn

500 kilometers

1,500 kilometers

Mainfl ingen

The Anthorn signal is receivable

within this area.

2,000 miles

(3,000 kilometers)

600 miles

(1,000 kilometers)

Fort Collins

E-17

If your Home City Code setting is this:

The watch can receive the signal from

the transmitter located here:

LONDON (LON), PARIS (PAR), ATHENS (ATH) Anthorn (England), Mainfl ingen (Germany)

HONG KONG (HKG) Shangqiu City (China)

TOKYO (TYO) Fukushima (Japan), Fukuoka/Saga (Japan)

HONOLULU (HNL), ANCHORAGE (ANC),

LOS ANGELES (LAX), DENVER (DEN),

CHICAGO (CHI), NEW YORK (NYC)

Fort Collins, Colorado (United States)

Important!

x The areas covered by HONOLULU (HNL) and ANCHORAGE (ANC) are quite far

from the calibration signal transmitters, so certain conditions may cause reception

problems.

x When HONOLULU (HNL) or HONG KONG (HKG) is selected as the Home City,

only the time and date are adjusted according to the time calibration signal. You

need to switch manually between standard time and daylight saving time (DST) if

required. See “To toggle the Home City time between standard time and daylight

saving time” (page E-34) for information about how to do this.

E-16

Radio Controlled Atomic Timekeeping

This watch receives a time calibration signal and updates its time setting accordingly.

However, when using the watch outside of areas covered by time calibration signals,

you will have to adjust the settings manually as required. See “Confi guring Current

Time and Date Settings Manually” (page E-36) for more information.

This section explains how the watch updates its time settings when the city code

selected as the Home City is in Japan, North America, Europe, or China, and is one

that supports time calibration signal reception.

E-15

To recover from the sleep state

Move the watch to a well-lit area or press any button.

E-14

Power Saving

Power Saving enters a sleep state automatically whenever the watch is left for a

certain period in an area where it is dark. The table below shows how watch functions

are affected by Power Saving.

x There actually are two sleep state levels: “second hand sleep” and “function sleep”.

Elapsed Time in Dark Operation

60 to 70 minutes (second hand

sleep)

x

x

Second Hand only stopped at 12 o’clock, all other

functions enabled

6 or 7 days (function sleep)

x All functions, including analog timekeeping, disabled

x Internal timekeeping maintained

x The watch will not enter a sleep state between 6:00 a.m. and 9:59 p.m. If the watch

is already in a sleep state when 6:00 a.m. arrives, however, it will remain in the

sleep state.

x The watch will not enter a sleep state while it is in the Stopwatch Mode.

E-13

Charging Times

Exposure Level (Brightness)

Daily

Operation

*1

Level Change *2

Level 3 Level 2 Level 1

Outdoor sunlight (50,000 lux) 8 minutes 2 hours 24 hours

Window sunlight (10,000 lux) 30 minutes 6 hours 89 hours

Window sunlight on cloudy day

(5,000 lux)

48 minutes 9 hours 144 hours

Indoor fl uorescent lighting (500 lux) 8 hours 97 hours – – –

* 1 Approximate exposure each day to generate power for normal daily operation.

* 2 Approximate amount exposure time required to take power up one level.

x The above exposure times all are for reference only. Actual exposure times depend

on lighting conditions.

x For details about the operating time and daily operating conditions, see the “Power

Supply” section of the Specifi

cations (page E-70).

E-12

Level Hand Movement Function Status

1 Normal. All functions enabled.

2

x

x

Second Hand moving at two-second

intervals.

m

m

Day Indicator changes to 1 (home

position).

Time calibration signal reception.

3

x

x

Second Hand stopped.

z

z

Hour Hand and c

c

Minute Hand stopped

at 12 o’clock.

All functions disabled.

x When power drops to Level 3, all functions will be disabled but the watch will

continue to keep time internally for about one week. If you recharge the battery

suffi ciently during this period, the analog hands will move automatically to the

correct setting and regular timekeeping will resume. After one week, all settings

(including timekeeping) will be cleared. Recharging the battery will reset all settings

to their initial factory defaults.

E-11

Power Levels

You can get an idea of the watch’s power level by

observing the movement of the

x

Second Hand in the

Timekeeping Mode.

x If the

x

Second Hand is moving normally in one-

second intervals, power is at Level 1.

x If the

x

Second Hand is moving at two-second

intervals, power is at Level 2, which is quite low (Low

battery alert). Expose the watch to light as soon as

possible so it can charge.

Moves at two-second

intervals.

30

z c

x

m

E-10

Warning!

Leaving the watch in bright light for charging can cause it to become quite hot.

Take care when handling the watch to avoid burn injury. The watch can become

particularly hot when exposed to the following conditions for long periods.

x On the dashboard of a car parked in direct sunlight

x Too close to an incandescent lamp

x Under direct sunlight

Important!

x Keep the watch in an area normally exposed to bright light when storing it for long

periods. This helps to ensure that power does not run down.

x Storing the watch for long periods in an area where there is no light or wearing it in

such a way that it is blocked from exposure to light can cause power to run down.

Make sure that the watch is exposed to bright light whenever possible.

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Casio Edifice EQW-M1100DB-1AER Horloge. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Casio. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Casio Edifice EQW-M1100DB-1AER Horloge in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Casio Horloges
Meer handleidingen voor Horloges

Veelgestelde vragen over Casio Edifice EQW-M1100DB-1AER Horloge

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Casio Edifice ECB-2200DD-1AEF Horloge

Handleiding

Casio Radio Controlled WV-200R-3AEF Horloge

Handleiding

Casio G-Shock GA-B2100-2AER Horloge

Handleiding

Casio Edifice ECB-30D-1AEF Horloge

Handleiding

Casio G-Shock DW-5900TD-9ER Horloge

Handleiding

Casio Pro Trek PRG-340-1ER Horloge

Handleiding

Casio Collection W-219HB-3AVEF Horloge

Handleiding

Casio Collection MTP-B145G-9AVEF Horloge

Gerelateerde categorieën