Handleiding Casio G-Shock DW-5600MWCT-7ER Horloge

Handleiding

Operation Guide 3229/3421/3489

E-19

To record split times

1. Press B to start the stopwatch.

2. Press A to display the timing up to that point. Stopwatch timing continues

internally.

3. Press A to clear the split time and to continue time measurement on the display.

x You can repeat steps 2 and 3 as many times as you want.

4. Press B to stop the time measurement.

5. Press A to clear the stopwatch to all zeros.

To time first and second place finishes

1. Press B to start the stopwatch.

2. Press A when the first finisher crosses the line, and record the time.

3. Press B when the second finisher crosses the line.

4. Press A to display the finishing time of the second finisher.

5. Press A again to clear the stopwatch to all zeros.

E-18

Stopwatch

The Stopwatch Mode lets you measure elapsed

time, split times, and two finishes. The range of the

stopwatch is 23 hours, 59 minutes, 59 seconds.

To measure elapsed time

1. Press B to start the stopwatch.

2. Press B to stop the stopwatch.

x You can resume the measurement operation by

pressing B again.

3. Press A to clear the stopwatch to all zeros.

x For the first 60 minutes, the display shows

minutes, seconds, and 1/100 second. After

60minutes, the display format changes to show

hours, minutes, and seconds.

Minutes

1/100 second

Current time

Mode indicator

Seconds

E-17

3. Press A to return to the Countdown Timer Mode.

x When the end of the countdown is reached while auto repeat is on, the alarm

sounds, but the starting countdown time is reset and countdown timing starts

again automatically whenever the countdown reaches zero. You can stop timing

by pressing B, and manually reset to the starting countdown time by pressing

A.

E-16

3. Stop the timer and then press A until the countdown time is reset to its starting

value.

x When the end of the countdown is reached and auto repeat timing is off, the

alarm sounds for 10 seconds or until you stop the alarm by pressing any button.

Countdown timing stops, and the countdown time is automatically reset to its

starting value after the alarm stops.

To switch auto repeat timing on and off

1. Press A while in the Countdown Timer Mode.

The hours digit flashes on the display because it

is selected.

2. Press D to switch auto repeat on and off.

Auto repeat on indicator

E-15

3. Press B to increase the selected number. Holding down B changes the

number at high speed.

x To set the starting value of the countdown time to 24 hours, set 0:00' 00.

4. After you set the countdown time, press A to return to the Countdown Timer

Mode.

x If you do not operate any button for a few minutes while a selection is flashing,

the flashing stops and the watch goes back to the Countdown Timer Mode

automatically.

To use the countdown timer

1. Press B while in the Countdown Timer Mode to start the countdown timer.

2. Press B again to stop the countdown timer.

x You can continue countdown timer operation by pressing B.

E-14

Countdown Timer

The countdown timer can be set within a range of

1second to 24 hours. When the countdown reaches

zero, an alarm sounds for 10 seconds or until you

press any button.

To set the countdown time

1. Press A while in the Countdown Timer Mode.

The hours digit flashes on the display because it

is selected.

2. Press C to change the selection in the following

sequence.

Minutes

Hours Seconds

C C

C

Minutes

Current time

Mode indicator

Hours Seconds

E-13

To stop the alarm

Press any button to stop the alarm after it starts to sound.

To switch an alarm and Hourly Time Signal on and off

Press B while in the Alarm Mode to change the status of an alarm (see “Alarm

Types” on page E-10) and Hourly Time Signal in the following sequence.

Both on

Both off Alarm only

B

Hourly Time

Signal only

B

B B

Alarm on indicator

Hourly time signal on indicator

E-12

2. Press C to change the selection in the following sequence.

Minutes

Hour

Day

C

Month

CC

C

3. Press B to increase the selected digits. Holding down B changes the number

at high speed.

x The format (12-hour and 24-hour) of the alarm time matches the format you

select for normal timekeeping.

x When setting the alarm time using the 12-hour format, take care to set the time

correctly as morning or afternoon.

4. After you set the alarm time, press A to return to the Alarm Mode.

x If you do not operate any button for a few minutes while a selection is flashing,

the flashing stops and the watch goes back to the Alarm Mode automatically.

E-11

x To set a date alarm

Set the month, day, hour and minutes for the alarm time. This type of setting

causes the alarm to sound at the specific time, on the specific date you set.

x To set a 1-month alarm

Set the month, hour and minutes for the alarm time. Set “– –” for the day (see step

3 under “To set the alarm time”). This type of setting causes the alarm to sound

every day at the time you set, only during the month you set.

x To set a monthly alarm

Set the day, hour and minutes for the alarm time. Set “–” for the month (see step 3

under “To set the alarm time”). This type of setting causes the alarm to sound every

month at the time you set, on the day you set.

To set the alarm time

1. Press A while in the Alarm Mode until the hour digits start to flash on the

display. The hour digits flash because they are selected.

x At this time, the alarm is automatically switched on.

E-10

Alarm

You can set an alarm with hour, minutes, month,

and day. When the alarm is on, the alarm sounds

for 20 seconds at the preset time. When the Hourly

Time Signal is on, the watch beeps every hour on

the hour.

Alarm Types

The types of alarm you get depends on the

information you set.

x To set a daily alarm

Set the hour and minutes for the alarm time. Set

“–” for the month and “– –” for the day (see step 3

under “To set the alarm time”). This type of setting

causes the alarm to sound every day at the time

you set.

Alarm on

indicator

Mode

indicator

Month

MinutesHour

Hourly time signal on indicator

Day

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Casio G-Shock DW-5600MWCT-7ER Horloge. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Casio. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Casio G-Shock DW-5600MWCT-7ER Horloge in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Casio Horloges
Meer handleidingen voor Horloges

Veelgestelde vragen over Casio G-Shock DW-5600MWCT-7ER Horloge

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.