Handleiding Casio G-Shock GA-110MMC-1AER Horloge

Handleiding

Operation Guide 5146 5425

E-20

Lap Time

A lap time reading shows the time elapsed since the last

lap time reading was taken.

•



If you want the watch to calculate the speed of each lap

(when all of the laps are the same distance), specify the

lap distance for the distance setting (page E-15).

•



If you want the watch to calculate the speed of the

entire race, specify the race distance for the distance

setting (page E-15). A speed will be indicated each

time you take a lap reading, but these lap speeds will

not indicate actual speed of the entire race.

To set up the stopwatch to take lap time readings

1. In the Stopwatch Mode, make sure the stopwatch is stopped and reset to all zeros.

• If you need to reset the stopwatch to all zeros, press $.

2. Make sure that LAP (lap times) is shown in the lower digital display.

• If SPL (split times) is displayed, press

$

to toggle it to LAP.

Lap time

E-21

To perform a lap time measurement

Select lap time (LAP) measurement and then perform the

following button operations.

'

Start

➝ $

Lap*

➝ $

Lap*

➝

'

Stop

➝ $

Reset

* Normal elapsed time measurement reappears after

about 12 seconds.

• You can press

$

to take lap readings as many times

as you like.

• While a lap time is displayed, the upper digital display

will alternate between the lap number (

#01

to

#99

) and

the lap hour value. If you take more than 99 lap

readings, the lap number will restart from

#00

following

lap

#99

.

• Pressing

'

to stop elapsed time measurement

displays the time (and speed if a distance is specifi ed)

of the fi nal lap.

Lap number

Speed hand

(calculated)

Minutes

Seconds

1/1000

second

s

Hours

E-22

Split Time

A split time reading shows the time elapsed since the

beginning of the current time measurement.

• If you want the watch to calculate the speed of the race,

specify the race distance for the distance setting (page

E-15).

• For split time readings, you can specify the total race

distance only. Though the watch will indicate a speed

each time you take a split reading, they will be based

on the total race distance, and so they will not indicate

actual intermediate split speeds.

To set up the stopwatch to take split time readings

1. In the Stopwatch Mode, make sure the stopwatch is stopped and reset to all zeros.

• If you need to reset the stopwatch to all zeros, press $.

2. Make sure that SPL (split times) is shown in the lower digital display.

• If LAP (lap times) is displayed, press

$

to toggle it to SPL.

Split time

E-23

To perform a split time measurement

Select split time (SPL) measurement and then perform the

following button operations.

'

Start

➝ $

Split

➝ $

Split Release*

➝

'

Stop

➝ $

Reset

* The split time is released automatically if you do not

press

$

within about 12 seconds.

• You can press

$

to take split readings as many times

as you like.

• The stopwatch continues elapsed time measurement

internally while a split time reading is displayed.

• Pressing

$

while a split time is displayed will switch

back to normal elapsed time measurement. The

elapsed time will appear in the lower digital display.

• You also could press

'

to stop elapsed time

measurement instead.

• Pressing

'

to stop elapsed time measurement

displays the time (and speed if a distance is specifi ed)

of the fi nal split (which is the overall elapsed time).

Hours

1/1000

second

s

Minutes

Seconds

Speed hand (calculated)

E-24

To measure times with the stopwatch

Elapsed Time

D

D A

Start Stop Reset

Lap Time

D

A A D A

Start

(

LAP

displayed)

Lap

(Lap01)

Lap

(Lap02)

Stop Reset

Split Time

D

A A D A

Start

(

SPL

displayed)

Split Split release Stop Reset

E-25

Countdown Timer

You can set the countdown start time within a range of

one minute to 24 hours. An alarm sounds when the

countdown reaches zero.

• You also can select auto-repeat, which automatically

restarts the countdown from the original value you set

whenever zero is reached.

• All of the operations in this section are performed in the

Countdown Timer Mode, which you enter by pressing

&

(page E-7).

Second

s

Auto-repeat off

Start time

(Hours : Minutes)

E-26

To use the countdown timer

Press

'

while in the Countdown Timer Mode to start the countdown timer.

• When the end of the countdown is reached, the alarm will sound for 10 seconds or

until you stop it by pressing any button.

• The countdown time is reset to its starting value automatically after the alarm stops

if auto-repeat is turned off.

• When auto-repeat is turned on, the countdown will restart automatically without

pausing when it reaches zero.

• The countdown timer measurement operation continues even if you exit the

Countdown Timer Mode.

• Press

'

while a countdown operation is in progress to pause it.

• Press

'

again to resume the countdown.

• To stop a countdown timer operation completely, fi rst pause it (by pressing

'

),

and then press

$

. This returns the countdown time to its starting value.

E-27

To confi gure countdown start time and auto-repeat settings

1. While the countdown start time is on the display in the

Countdown Timer Mode, hold down

$

for about three

seconds until the hour setting of the countdown start

time starts to fl ash. This is the setting mode.

• If the countdown start time is not displayed, use

the procedure under “To use the countdown timer”

(page E-26) to display it.

2. Press

&

to move the fl ashing in the sequence shown

below, and select the setting you want to change.

Start Time

(Minutes)

Auto-Repeat

On/Off

Start Time

(Hours)

3. Perform the following operations, depending on which setting currently is selected

on the display.

• While the start time setting is fl ashing, use ' (+) and % (–) to change it.

• While the auto-repeat on/off setting is fl ashing on the display, press ' to

toggle auto-repeat on (

) and off ( ).

l

l

l

l

l

l

l

l

l

l

l

Start time

(Hours : Minutes)

Auto-repeat on

E-28

4. Press

$

to exit the setting mode.

• The auto-repeat on ( ) is displayed on the Countdown Timer Mode screen while

this function is turned on.

E-29

World Time

World Time digitally displays the current time in one of

48 cities (29 time zones) around the world. A simple

operation swaps your Home City with the currently

selected World Time City.

• The times kept in the World Time Mode are

synchronized with the time being kept in the

Timekeeping Mode. If you feel that there is an error in

any World Time Mode time, check to make sure you

have the correct city selected as your Home City. Also

check to make sure that the current time as shown in

the Timekeeping Mode is correct.

• Times in the World Time Mode are based on UTC

offsets. See the “City Code Table” at the back of this

manual for information about the UTC offsets that are

supported.

• All of the operations in this section are performed in the World Time Mode, which

you enter by pressing

&

(page E-7).

Currently selected

World Time City

World Time

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Casio G-Shock GA-110MMC-1AER Horloge. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Casio. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Casio G-Shock GA-110MMC-1AER Horloge in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Casio Horloges
Meer handleidingen voor Horloges

Veelgestelde vragen over Casio G-Shock GA-110MMC-1AER Horloge

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Casio Sheen SHE-4539CM-4AUER Horloge

Handleiding

Casio Edifice ECB-2000DC-1AEF Horloge

Handleiding

Casio Collection LA-20WHS-2AEF Horloge

Handleiding

Casio Edifice EFV-150L-1AVUEF Horloge

Handleiding

Casio Edifice ECB-950DB-2AEF Horloge

Handleiding

Casio G-Shock GWG-B1000-3AER Horloge

Handleiding

Casio Sheen SHE-3517L-1AUEF Horloge

Handleiding

Casio Collection LTP-1302PRG-7AVEF Horloge

Gerelateerde categorieën