Handleiding Casio G-Shock GD-400GB-1B2EF Horloge

Handleiding

Operation Guide 3434

E-39

Scrolling

The B and D buttons are used in various modes and setting screens to scroll

through data on the display. In most cases, holding down these buttons during a scroll

operation scrolls at high speed.

Initial Screens

When you enter the World Time or Alarm Mode, the data you were viewing when you

last exited the mode appears fi rst.

Timekeeping

x Resetting the seconds to while the current count is in the range of 30 to 59

causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are

reset to

without changing the minutes.

x The year can be set in the range of 2000 to 2099.

x The watch’s built-in full automatic calendar makes allowances for different month

lengths and leap years. Once you set the date, there should be no reason to change

it except after you have the watch’s battery replaced.

E-38

To turn the button operation tone on and off

In any mode (except when a setting screen is on the display), hold down C to toggle

the button operation tone on (the mute indicator not displayed) and off (the mute

indicator displayed).

x Holding down C to turn the button operation tone on or off also causes the watch’s

current mode to change.

x The mute indicator is displayed in all modes when the button operation tone is

turned off.

Auto Return Features

x If you leave the watch in the Alarm Mode for two or three minutes without performing

any operation, it automatically changes to the Timekeeping Mode.

x If you leave a screen with fl ashing digits on the display for two or three minutes

without performing any operation, the watch automatically exits the setting screen.

E-37

x Graphic area B: In the Timekeeping Mode and World Time Mode, segments indicate

the current time (in units of one second). In the Countdown Timer

Mode and Stopwatch Mode, segments indicate the ongoing timer

measurement (in units of one second).

Button Operation Tone

The button operation tone sounds any time you press one

of the watch’s buttons. You can turn the button operation

tone on or off as desired.

x Even if you turn off the button operation tone, the alarms,

the Hourly Time Signal, and the countdown alarm all

operate normally.

Mute indicator

E-36

Reference

This section contains more detailed and technical information about watch operation.

It also contains important precautions and notes about the various features and

functions of this watch.

Graphic Areas

There are two graphic areas named A and B.

x Graphic area A: In the Timekeeping Mode and World

Time Mode, segments indicate the

current time (in units of 10 seconds).

In the Countdown Timer Mode and

Stopwatch Mode, segments indicate

the ongoing timer measurement (in

units of 1/10 second).

Graphic area B

Graphic area A

E-35

Warning!

x Always make sure you are in a safe place whenever you are reading the watch

using the auto light switch. Be especially careful when running or engaged

in any other activity that can result in accident or injury. Also take care that

sudden illumination by the auto light switch does not startle or distract others

around you.

x When you are wearing the watch, make sure that its auto light switch is turned

off before riding on a bicycle or operating a motorcycle or any other motor

vehicle. Sudden and unintended operation of the auto light switch can create a

distraction, which can result in a traffi c accident and serious personal injury.

To turn the auto light switch on and off

In the Timekeeping Mode, hold down L for about three seconds to toggle the auto

light switch on (auto light switch on indicator displayed) or off (auto light switch on

indicator not displayed).

x The auto light switch on indicator is on the display in all modes while the auto light

switch is turned on.

x In order to protect against running down the battery, the auto light switch turns off

automatically approximately six hours after you turn it on.

E-34

About the Auto Light Switch

While the auto light switch is enabled, illumination turns on whenever you position

your wrist as described below in any mode.

Moving the watch to a position that is parallel to the ground and then tilting it

towards you at more than 40 degrees causes illumination to turn on.

x Wear the watch on the outside of your wrist.

Parallel to ground

More than 40°

E-33

To turn on illumination

In any mode (except when a setting screen is on the display), press L to turn on

illumination.

x You can use the procedure above to select either 1.5 seconds or 3 seconds as the

illumination duration. When you press L, the illumination will remain on for about

1.5 seconds or 3 seconds, depending on the current illumination duration setting.

To specify the illumination duration

1. In the Timekeeping Mode, hold down A until the

seconds start to fl ash, which indicates the setting

screen.

2. While the seconds are fl ashing, press C nine times to

display the illumination duration setting screen.

3. Press D to toggle between 1.5 seconds (

) and

3 seconds (

).

4. Press A to exit the setting screen.

E-32

Illumination

This watch has two LEDs (light-emitting diode) that cause

the entire display to glow for easy reading in the dark. The

watch’s auto light switch turns on illumination automatically

when you angle the watch for reading towards your face.

x The auto light switch must be turned on (indicated by the

auto light switch on indicator) for it to operate.

x See “Illumination Precautions” (page E-42) for more

important information.

Auto light switch on

indicator

E-31

To measure times with the stopwatch

Elapsed Time

D D D D B

Start Stop Re-start Stop Clear

Split Time

D B B D B

Start Split

(SPL displayed)

Split release Stop Clear

Two Finishes

D B D B B

Start Split

First runner

fi nishes. Display

time of fi rst

runner.

Stop

Second runner

fi nishes.

Split release

Display time of

second runner.

Clear

E-30

Stopwatch

The stopwatch lets you measure elapsed time, split

times, and two fi nishes.

x A display range of the stopwatch is 23 hours, 59

minutes, 59.99 seconds.

x A stopwatch continues to run, restarting from zero after

it reaches its limit, until you stop it.

x A stopwatch measurement operation continues even if

you exit the Stopwatch Mode.

x Exiting the Stopwatch Mode while a split time is frozen

on the display clears the split time and returns to

elapsed time measurement.

x All of the operations in this section are performed in

the Stopwatch Mode, which you enter by pressing C

(page E-7).

Seconds

Minutes

Hours

1/100 second

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Casio G-Shock GD-400GB-1B2EF Horloge. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Casio. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Casio G-Shock GD-400GB-1B2EF Horloge in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Casio Horloges
Meer handleidingen voor Horloges

Veelgestelde vragen over Casio G-Shock GD-400GB-1B2EF Horloge

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Beoordeling

Gerelateerde producten

Handleiding

Casio Edifice EFS-S560DB-1AVEF Horloge

Handleiding

Casio G-Shock MRG-B5000D-1ER Horloge

Handleiding

Casio Edifice EFR-571DB-1A1VEF Horloge

Handleiding

Casio Wave Ceptor WV-59RD-1AEF Horloge

Handleiding

Casio Edifice EQB-1000D-1AEF Horloge

Handleiding

Casio G-Shock DWE-5640RX-7ER Horloge

Handleiding

Casio Edifice EFS-S641TMS-1AER Horloge

Handleiding

Casio G-Shock GMA-P2100-7AER Horloge

Gerelateerde categorieën