Handleiding Casio G-Shock GM-110NE-1AER Horloge

Handleiding

Operation Guide 5553

E-29

Illumination

An LED (light-emitting diode) illuminates the face of the

watch for easy reading in the dark. The watch’s auto light

switch turns on illumination automatically when you angle

the watch towards your face.

• The auto light switch must be turned on (indicated by

the auto light switch indicator) for it to operate.

• See “Illumination Precautions” (page E-38) for other

important information about using illumination.

To illuminate the display manually

In any mode, press

B

to turn on illumination.

• The above operation turns on illumination regardless of

the current auto light switch setting.

• You can use the procedure below to select either 1.5

seconds or 3 seconds as the illumination duration.

When you press

B

, the illumination will remain on for

about 1.5 seconds or 3 seconds, depending on the

current illumination duration setting.

Auto light switch

indicator

E-28

To turn the Hourly Time Signal on and off

1. In the Alarm Mode, use

D

to select the Hourly Time

Signal (

) (page E-25).

2. Press

A

to toggle it on and off.

• The Hourly Time Signal on indicator is shown on the

display in all modes while this function is turned on.

Hourly time signal

on indicator

ON

E-27

To turn an alarm on and off

1. In the Alarm Mode, use

D

to select an alarm.

2. Press

A

to toggle it on and off.

• Turning on a alarm (

, , , or )

displays the alarm on indicator on its Alarm Mode

screen.

• In all modes, the alarm on indicator is shown for any

alarm that currently is turned on.

• The alarm on indicator flashes while the alarm is

sounding.

• The snooze alarm indicator flashes while the snooze

alarm is sounding and during the 5-minute intervals

between alarms.

Snooze alarm indicator

Alarm on indicator

ON

E-26

3. Press

C

to move the flashing between the hour and minute settings.

4. While a setting is flashing, use

D

(+) and

B

(–) to change it.

5. Press

A

to exit the setting mode.

Alarm Operation

The alarm tone sounds at the preset time for 10 seconds, regardless of the mode the

watch is in. In the case of the snooze alarm, the alarm operation is performed a total

of seven times, every five minutes, or until you turn the alarm off (page E-27).

• Alarm and Hourly Time Signal operations are performed in accordance with the

current time in your Home City, as kept in the Timekeeping Mode.

• To stop the alarm tone after it starts to sound, press any button.

• Performing any one of the following operations during a 5-minute interval between

snooze alarms cancels the current snooze alarm operation.

Displaying the Timekeeping Mode setting screen (page E-9)

Displaying the

setting screen (page E-25)

To test the alarm

In the Alarm Mode, hold down

D

to sound the alarm.

E-25

To set an alarm time

1. In the Alarm Mode, use

D

to scroll through the alarm

screens until the one whose time you want to set is

displayed.

DDDD

DD

• To set an alarm time, display the applicable alarm

screen (

through , or ).

•

is the hourly time signal setting (page E-28).

• The snooze alarm operation repeats every five

minutes.

2. After you select an alarm, hold down

A

for about two seconds until the hour setting

of the alarm time starts to flash. This is the setting mode.

• Holding down

A

will initially cause “Hold” to appear on the screen. Keep

A

depressed until “Hold” disappears.

• This operation turns on the alarm automatically.

OFF

E-24

Alarms

When an alarm is turned on, the alarm tone will sound

when its alarm time is reached. One of the alarms is a

snooze alarm, while the other four are daily alarms.

You also can turn on an Hourly Time Signal that causes

the watch to beep twice every hour on the hour.

• The snooze alarm screen is indicated by

, while the

other alarm screens are numbered

through .

The Hourly Time Signal screen is indicated by

.

• All of the operations in this section are performed in the

Alarm Mode, which you enter by pressing

C

(page E-7).

Alarm time

(Hour : Minutes)

ON

E-23

Swapping your Home City and World Time City

You can use the procedure below to swap your Home City and World Time City. This

changes your Home City to your World Time City, and your World Time City to your

Home City. This capability can come in handy when you frequently travel between two

cities in different time zones.

To swap your Home City and World Time City

1. In the World Time Mode, use

D

to select the World Time City you want.

2. Press

A

and

B

at the same time until the watch beeps.

• This will make the World Time City you selected in step 1 your Home City, and

cause the hour and minute hands to move to the current time in that city. At the

same time, it will change the Home City you had selected prior to step 2 your World

Time City, and cause the content of lower display to change accordingly.

• After swapping the Home City and World Time City, the watch stays in the World

Time Mode with the city that was selected as the Home City prior to step 2 now

displayed as the World Time City.

E-22

To toggle a city code time between Standard Time and Daylight Saving Time

1. In the World Time Mode, press

D

to display the city

code (time zone) whose Standard Time/Daylight Saving

Time setting you want to change.

2. Hold down

A

for about two seconds to toggle between

Daylight Saving Time (DST indicator displayed) and

Standard Time (DST indicator not displayed).

• Holding down

A

will initially cause “Hold” to appear on

the screen. Keep

A

depressed until “Hold” disappears.

• The

DST

indicator is shown in the lower display while

Daylight Saving Time is turned on.

• You can turn on DST individually for each city code,

except UTC.

• Turning on DST for the city code that is currently

selected as your Home City will turn on DST for normal

timekeeping.

DST indicator

E-21

To view the current time in another time zone

In the World Time Mode, use

D

to scroll through available city codes (time zones).

Holding down the button scrolls at high speed.

• The lower display shows the current time in the World Time City.

• To select the UTC time zone (Differential 0), press

B

and

D

at the same time.

• When the city code (time zone) you want is selected, you can press

A

to display

the date. After about one second, the watch will resume regular timekeeping for the

currently selected city.

Hour : Minutes Date

Seconds

A

One second

E-20

World Time

World Time digitally displays the current time in one of

48 cities (31 time zones) around the world. A simple

operation swaps your Home City with the currently

selected World Time City.

• The times kept in the World Time Mode are

synchronized with the time being kept in the

Timekeeping Mode. If you feel that there is an error in

any World Time Mode time, check to make sure you

have the correct city selected as your Home City. Also

check to make sure that the current time as shown in

the Timekeeping Mode is correct.

• Times in the World Time Mode are based on UTC

offsets. See the “City Code Table” at the back of this

manual for information about the UTC offsets that are

supported.

• All of the operations in this section are performed in the

World Time Mode, which you enter by pressing

C

(page E-7).

Currently selected

World Time City

World Time

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Casio G-Shock GM-110NE-1AER Horloge. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Casio. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Casio G-Shock GM-110NE-1AER Horloge in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Casio Horloges
Meer handleidingen voor Horloges

Beoordeling

Veelgestelde vragen over Casio G-Shock GM-110NE-1AER Horloge

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Casio Sheen SHE-3806D-7AEF Horloge

Handleiding

Casio Edifice EFV-540D-1AVEF Horloge

Handleiding

Casio Wave Ceptor WVA-M650D-2AEF Horloge

Handleiding

Casio G-Shock DWE-5640RX-7ER Horloge

Handleiding

Casio LF-10WH-8EF Horloge

Handleiding

Casio G-Shock GCW-B5000UN-6ER Horloge

Handleiding

Casio Sheen SHE-3047PG-5AER Horloge

Handleiding

Casio Edifice EFR-S107L-1AVEF Horloge

Gerelateerde categorieën