Handleiding Casio Pro Trek PRW-50YFE-2AER Horloge

Handleiding

E-31

• Button operations are provided for direct access to the Timekeeping, Digital Compass, and Altimeter

modes.

Timekeeping Mode

Digital Compass Mode Altimeter Mode

E-30

Selecting a Mode

• The illustration below shows which buttons you need to press to navigate between modes.

• To return to the Timekeeping Mode from any other mode, hold down

B

for about two seconds.

Countdown Timer Mode

Stopwatch Mode

Alarm Mode

Data Recall Mode

World Time Mode

Thermometer Mode

Receive Mode

Barometer Mode

E-29

Mode Reference Guide

Your watch has 11 “modes”. The mode you should select depends on what you want to do.

To do this: Enter this mode: See:

• View the current time and date in the Home City

• Confi gure Home City and daylight saving time (DST) settings

• Confi gure time and date settings manually

• Enable auto signal reception

Timekeeping Mode E-33

Determine your current bearing or the direction from your current location to a

destination

Digital Compass Mode E-42

• View the altitude at your current location

• Determine the altitude differential between two locations (reference point and

current location)

• Record an altitude reading with the reading time and date

Altimeter Mode E-52

• View the barometric pressure at your current location

• View a graph of barometric pressure readings

•

Enable alerts (display and beep) for noteworthy changes in barometric pressure

Barometer Mode E-68

View the temperature at your current location Thermometer Mode E-77

Recall records created in the Altimeter Mode Data Recall Mode E-80

Use the stopwatch to measure elapsed time Stopwatch Mode E-84

Use the countdown timer Countdown Timer Mode E-86

Set an alarm time Alarm Mode E-88

View the current time in 29 cities (29 time zones) and UTC (Universal Coordinated

Time) time

World Time Mode E-91

• Perform a manual time calibration signal receive operation

• Check whether the last receive operation was successful

• Confi gure auto receive settings

Receive Mode E-19

E-28

• The receive operation is disabled under any of the following conditions.

– While power is at Level 3 (

L

) or lower (page E-14)

– While the watch is in the power recovery mode (page E-16)

– While a direction, barometric pressure, temperature, or altitude reading operation is in progress

– When the watch is in the function sleep state (“Power Saving”, page E-18)

– While barometric pressure change indicator is being measured

– While a countdown timer operation is in progress (page E-86)

• A receive operation is cancelled if an alarm sounds while it is being performed.

• The Home City setting reverts to the initial default of

TYO

(Tokyo) whenever the battery power level

drops to Level 5 or when you have the rechargeable battery replaced. If this happens, change the

Home City to the setting you want (page E-34).

E-27

To turn auto receive on or off

1. Enter the Receive Mode (page E-30).

• R/C will be displayed for about one second, and then the date (month and day) and the time of the

last signal reception will alternate on the digital display.

• Dashes (- : - - and -.- -) alternating in place of the date and time indicate there has been no

successful signal reception yet (since you purchased the watch or had its battery replaced).

2. Pull out the crown. This will cause the current auto receive status (

ON

or

OFF

) to fl ash on the digital

display.

• Only AUTORC OFF is displayed for cities that do not support time calibration signal reception.

AUTORC ON is not displayed.

3. Rotate the crown to select either auto receive on (

ON

) or auto receive off (

OFF

).

4. After the setting is the way you want, push the crown back in. This will return to the screen that was

displayed in step 1 of this procedure.

Radio-controlled Atomic Timekeeping Precautions

• Strong electrostatic charge can result in the wrong time setting.

• Even if a receive operation is successful, certain conditions can cause the time setting to be off by up

to one second.

• The watch is designed to update the date and day of the week automatically for the period January 1,

2000 to December 31, 2099. Updating of the date by signal reception will no longer be performed

starting from January 1, 2100.

• If you are in an area where signal reception is not possible, the watch keeps time with the precision

noted in “Specifi cations”.

E-26

To check the latest signal reception results

Enter the Receive Mode (page E-30).

1.

R/C

will be displayed for about one second, and then the date (month and day) and the time of the last

signal reception will alternate on the digital display at two second intervals.

• Dashes (- : - - and -.- -) alternating in place of the date and time indicate there has been no

successful signal reception yet (since you purchased the watch or had its battery replaced).

2 seconds

2. To return to the Timekeeping Mode, press

B

.

E-25

Signal Level Indicator

During calibration signal reception, the signal level indicator displays the

signal level as shown below.

Weak (Unstable) Strong (Stable)

The level indication will change in accordance with reception conditions

while reception is being performed.

As you watch the indicator, keep the watch in a location that best

maintains stable reception.

• Even under optimum reception conditions, it can take about 10

seconds for reception to stabilize.

• Note that weather, the time of day, surroundings, and other factors all

can affect reception.

E-24

Receive failed

If there was a previously

successful reception

Operation Guide 5620

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Casio Pro Trek PRW-50YFE-2AER Horloge. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Casio. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Casio Pro Trek PRW-50YFE-2AER Horloge in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Casio Horloges
Meer handleidingen voor Horloges

Beoordeling

Veelgestelde vragen over Casio Pro Trek PRW-50YFE-2AER Horloge

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Casio W-96H-1AVEF Horloge

Handleiding

Casio G-Shock GM-S110PG-1AER Horloge

Handleiding

Casio AE-2000WD-1AEF Horloge

Handleiding

Casio LA670WETG-9AEF Horloge

Handleiding

Casio W-219H-1A2VEF Horloge

Handleiding

Casio G-Shock GA-010-5AER Horloge

Handleiding

Casio Edifice EFR-552D-1AVEF Horloge

Handleiding

Casio Timeless Collection W-201-1BVEF Horloge

Gerelateerde categorieën