l
The watch attached with a bezel can
measure the elapsed time. Align the
t
mark
on the bezel with the minute hand by turning
it so that the time elapsed from the
t
mark
can be measured.
Warnings and precautions that appear in the documentation for this product
and, in some cases, on the display of the product itself are indicated by
graphic symbols. These symbols are intended to ensure safe and correct
operation, and to protect you and others against injury and loss. The following
shows samples of the graphic symbols and describes what each of them
means.
Examples
Agureenclosedwithinatriangleindicatesamatterthatdeserves
caution.Theexampleshownherewarnsagainstelectricalshock.
Agureenclosedwithinacirclewithalinerunningdiagonally
through it indicates something you should not do. The example
shown here indicates that you must never disassemble the product.
Agureenclosedwithinablackcircleindicatessomethingyoumust
do. The example shown here indicates that you must unplug the
product from the AC power outlet.
Danger
This symbol indicates information that, if ignored or
applied incorrectly, creates the danger of death or serious
personal injury.
Warning
This symbol alerts you to precautions about matters
that,ifignored,couldpossiblyputyouatriskofserious
personal injury or even death.
Caution
This symbol alerts you to precautions about matters that,
if ignored, could possibly cause material damage or put
youatriskofseriouspersonalinjury.
Warning
This product is not a diver’s watch. Never use it while
scubadivingwithairtanks.Doingsocreatestheriskof
personal injury.
Battery Handling
Takecaretoensurethatthebutton-typebatteryusedtopowerthisproduct
isnotaccidentallyswallowed.Beespeciallycarefultokeepthebatteryout
of the reach of small children.
Keep the battery in a place where they cannot be found by small children. If
the battery is accidentally swallowed, consult with a physician immediately.
Caution
Rash
Thewatchcaseandbandcomeintodirectcontactwiththeskin,socertain
conditions can cause a rash that may indicate one or more of the followings.
•
Allergic reaction against the metal or leather
•
Dirt, rust, sweat, or other foreign matter on the watch case or band
•
Sicknessorotherphysicalabnormality
l
Tightening the band too snugly can cause sweating and interfere with the
normalpassageofair.Besuretoallowsomespacebetweenthewatch
andband,andyourskin.
l
The anti-bacterial odor band inhibits the formation of odor-causing
bacteria caused by sweat and other agents. It does not necessarily
protect against rash.
l
Besuretoseeyourphysicianimmediatelywheneveryounoticeanyskin
abnormality.
Caution
Using the watch
Makesureyouareinasafeplacebeforereadingthedisplayofthewatch.
Beespeciallycarefultoavoidcausingaccidentorinjurytoyourselforothers
around you when reading the display while running or jogging along or near
a roadway, or operating a bicycle, motorcycle, automobile, or other vehicle.
If the watch stops running, have the battery replaced as soon as possible.
Donottrytofastenorunfastenthebuckleusingyourngernail.Doingso
cancauseyourngernailtobreakorbecomeinjured.Thisisespeciallytrue
forpeoplewithlongngernails.
Besuretoremovethewatchbeforesleeping.Leavingitonwhilesleeping
createstheriskofaccidentalinjurytoyourselforallergicreaction.
Takeoffthewatchwheneverhandlingorcomingintocontactwithsmall
children.Leavingitoncreatestheriskofaccidentalinjurytoachildor
allergicreactionofachild’sskin.
Cleaning
A dirty watch case or band can cause soiling of the cuffs and sleeves of
yourclothing.Besuretotakestepstokeepthewatchcaseandbandclean.
Takespecialcaretorinseoffseawaterandallowthewatchandbandto
thoroughly dry before using them again.
Do not try to take this product apart.
Nevertrytotakethisproductapart.Doingsocreatestheriskof
personal injury and damage to the product.
Important Safety Precautions
Water Resistance
The following applies to watches with WATER RESIST or WATER RESISTANT marked on the •
back cover.
Water
Resistance
Under
DailyUse
EnhancedWaterResistanceUnderDailyUse
5
Atmospheres
10
Atmospheres
20
Atmospheres
Marking
Onwatchfrontoronback
cover
No
BARmark
5BAR 10BAR 20BAR
Exampleof
DailyUse
Hand washing, rain Yes Yes Yes Yes
Water-relatedwork,swimming
No Yes Yes Yes
Windsurng No No Yes Yes
Skindiving No No Yes Yes
Do not use this watch for scuba diving or other types of diving that requires air tanks.•
Watches that do not have WATER RESIST or WATER RESISTANT marked on the back cover •
are not protected against the effects of sweat. Avoid using such a watch under conditions where
it will be exposed to large amounts of sweat or moisture, or to direct splashing with water.
Even if a watch is water-resistant, do not operate its buttons or crown while it is submersed in water •
or wet.
Even if a watch is water-resistant, avoid wearing it in the bath or in areas where detergents (soap, •
shampoo, etc.) are being used. Such conditions can reduce water resistance.
After submersion in seawater, use plain water to rinse all salt and dirt from the watch.•
In order to maintain water resistance, have the gaskets of your watch replace periodically (about •
once every two or three years).
A trained technician will know how to check your watch for proper water resistance whenever you •
have its battery replaced. Battery replacement requires the use of special tools. Always request
battery replacement from your original retailer or from an authorized CASIO Service Center.
Some water-resistant watches come with fashionable leather bands. Avoid swimming, washing, •
or any other activity that causes direct exposure of a leather band to water.
The inside surface of the watch glass may fog when the watch is exposed to a sudden drop in •
temperature. No problem is indicated if the fogging clears up relatively quickly. If the fogging does
not clear or if water has gotten into the watch, take the watch in for repair immediately.
Continued use of the watch with water inside can result in damage to electronic and mechanical •
components, the face of the watch, etc.
Band
Tightening the band too tightly can cause you to sweat and make it hard for air to pass under the •
band, which can lead to skin irritation. Do not fasten the band too tightly. There should be enough
room between the band and your wrist so you can insert your finger.
Deterioration, rust, or corrosion of the band can cause it to break, which may result in the watch falling •
off your wrist and becoming lost. Be sure to take good care of the band and keep it clean. Should
you notice any breakage, discoloration, looseness or other problem with the band, immediately
contact your original retailer or an authorized CASIO Service Center to have it checked, repaired,
or replaced. Note that you will be charged for any repair or replacement of the band.
Temperature
Never leave the watch on the dashboard of a car, near a heater, or in any other location that is •
subject to very high temperatures. Do not leave the watch where it will be exposed to very low
temperatures, either. Temperature extremes can cause the watch to lose or gain time, to stop, or
otherwise malfunction.
Impact
Your watch is designed to withstand impact incurred during normal daily use and light activity •
such as playing catch, tennis, etc. Dropping the watch or otherwise subjecting it to strong impact,
however, can lead to malfunction.
Note that watches with shock-resistant designs (G-SHOCK, Baby-G, G-ms) can be worn while
operating a chain saw or engaging in other activities that generate strong vibration, or while engage
in strenuous sports activities (motocross, etc.).
Magnetism
The hands of analog and combination (analog-digital) watches are moved by a motor that uses •
magnetic force. When such a watch is close to a device (audio speakers, magnetic necklace, cell
phone, etc.) that emits strong magnetism, the magnetism can cause timekeeping to slow down,
speed up, or stop, resulting in the incorrect time being displayed.
Electrostatic Charge
Exposure to very strong electrostatic charge can cause the watch to display the wrong time. Very •
strong electrostatic charge even can damage electronic components.
Chemicals
Do not allow the watch to come into contact with thinner, gasoline, solvents, oils, or fats, or with •
any cleaners, adhesives, paints, medicines, or cosmetics that contain such ingredients. Doing so
can cause discoloration of or damage to the case, resin band, leather band, and other parts.
Storage
If you do not plan to use the watch for a long time, wipe it thoroughly free of all dirt, sweat, and •
moisture, and store it in a cool, dry place.
Resin Components
Allowing the watch to remain in contact with other items or storing it together with other items for •
long periods while it is wet can cause the color of the other items to transfer to the resin components
of the watch. Be sure to dry off the watch thoroughly before storing it and make sure it is not in
contact with other items.
Leaving the watch where it is exposed to direct sunlight (ultraviolet rays) for long periods or failure •
to clean dirt from the watch for long periods can cause it to become discolored.
Friction caused by certain conditions (frequent external force, sustained rubbing, impact, etc.) can •
cause discoloration of painted components.
•
If there are printed figures on the band, strong rubbing of the printed area can cause discoloration.
Failure to clean dirt from the watch for long periods can cause fluorescent color to fade. Wash dirt •
off with water as soon as possible and then dry the watch.
Semi-transparent resin parts can become discolored due to sweat and dirt, and if exposed to high •
temperatures for long periods.
Contact an authorized CASIO Service Center to have resin components replaced. Note that you •
will be charged for replacement costs.
Natural Leather and Imitation Leather Bands
Allowing the watch to remain in contact with other items or storing it together with other items while •
it is wet for long periods can cause the color of the other items to transfer to the natural leather or
imitation leather band of the watch. Be sure to dry off the watch thoroughly before storing it and
make sure it is not in contact with other items.
Leaving a leather band where it is exposed to direct sunlight (ultraviolet rays) for long periods or •
failure to clean dirt from a leather band for long periods can cause it to become discolored.
Important!
Subjecting a natural leather or imitation leather band to rubbing or dirt can cause color transfer and •
discoloration.
Metal Components
Failure to clean dirt from a metal band can lead to formation of rust, even if the band is stainless •
steel or plated. If the watch is exposed to sweat or water, wipe it thoroughly with a soft, absorbent
cloth and then store it in a well-ventilated location to dry.
To clean the band, use a soft toothbrush or similar tool to scrub it with a weak solution of water •
and a mild neutral detergent. Take care to avoid getting solution on the watch case.
Bacteria and Odor Resistant Band
The bacteria and odor resistant band protects against odor generated by the formation of bacteria •
from sweat, which ensures good comfort and hygiene. In order to ensure maximum bacteria and
odor resistance, keep the band clean. Use an absorbent soft cloth to wipe the band clean of dirt,
sweat, and moisture. The bacteria and odor resistant band suppresses the formation of organisms
and bacteria. It does not protect against rash due to allergic reaction, etc.
Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss
suffered by you or any third party arising through the use of this product or its malfunction.
Operating Precautions User Maintenance
Caring for Your Watch
A dirty or rusty case or band can soil the sleeve of your clothing, cause skin irritation, and even •
interfere with watch performance. Be sure to keep the case and band clean at all times. Rust tends
to form easily after the watch is exposed to seawater and then left without cleaning.
Sometimes a smudge like pattern may appear on the surface of a resin band. This will not have •
any affect on your skin or clothing. Wipe the band with a cloth to clean it.
Keep a leather band clean by wiping it with a dry cloth. Both resin bands and leather band can •
become worn and cracked over time when subjected to normal daily use.
Should your band become badly cracked or worn, be sure to have it replaced with a new one. •
Request band replacement from your original retailer or an authorized CASIO Service Center.
Note that you will be charged for band replacement costs, even if your watch is still covered by its
warranty.
Remember that you wear your watch next to your skin, just like a piece of clothing. Because of this, •
you should always keep your watch clean. Use a soft, absorbent cloth to wipe off any dirt, sweat,
water, or other foreign matter from the case and band.
Dangers of Poor Watch Care
Rust
Though the stainless steel used for the watch is highly rust-resistant, rust can form if the watch is •
not cleaned after it becomes dirty. Failure of oxygen to come into contact with the metal because it
is dirty causes breakdown of the oxidization layer on the metal surface, which leads to the formation
of rust.
Even if the surface of the metal appears clean, sweat and rust in crevasses can soil the sleeves •
of clothing, cause skin irritation, and even interfere with watch performance.
Premature Wear
Leaving sweat or water on a resin band or storing it an area subject to high moisture can lead to •
premature wear, cuts, and breaks.
Skin Irritation
Individuals with sensitive skin or in poor physical condition may experience skin irritation when •
wearing a watch. Such individuals should keep their leather band or resin band particularly clean,
or switch to a metal band. Should you ever experience a rash or other skin irritation, immediately
remove the watch and contact a skin care professional.
Battery Replacement
Leave battery replacement up to your original retailer or authorized CASIO Service Center.•
Have the battery replaced only with the type specified by in this manual. Use of another type of •
battery can cause malfunction.
When replacing the battery, also request a check for proper water resistance. Note that you will be •
charged separately for water resistance inspection.
Initial Battery
The battery that comes loaded in your watch when you purchase it is used for function and •
performance testing at the factory.
This type of test battery may go dead quicker than the normally rated battery life as noted in the •
User’s Guide. Note that you will be charged for replacement of this battery, even if replacement is
required within the watch’s warranty period.
Low Battery Power
Low battery power is indicated by large timekeeping error, when display contents are dim, or when •
the display does blank.
Operation while battery power is low can result in malfunction. Replace the battery as soon as •
possible.
Using the Stopwatch
Praat mee over dit product
Laat hier weten wat jij vindt van de Casio Sheen SHN-5000BP-7AVEF Horloge. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.