Handleiding Casio Timeless Collection STR-300C-1VEF Horloge

Handleiding

USER’S GUIDE 2575

1

About This Manual

• Button operations are indicated using the letters shown

in the illustration.

• Each section of this manual provides you with the

information you need to perform operations in each

mode. Further details and technical information can be

found in the “Reference” section.

(Light)

Stopwatch Mode

▲

▲

Dual Time Mode Alarm Mode Countdown Timer Mode

Recall Mode

▲

▲

▲

Press C.

General Guide

• Press C to change from mode to mode.

• In any mode, press L to illuminate the display.

▲

Timekeeping Mode

Timekeeping

Use the Timekeeping Mode to set and view the current

time and date.

To set the time and date

1. In the Timekeeping Mode, hold down B until the

seconds start to flash, which indicates the setting

screen.

2. Press C to move the flashing in the sequence shown

below to select other settings.

Hour : Minutes Seconds

Year

Day of week

Month – Day

PM indicator

HourSeconds

12/24-Hour

Format

Day Month

Ye a r

Minutes

4. Press B to exit the setting screen.

• The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is

applied in all modes.

• The day of the week is automatically displayed in accordance with the date (year,

month, and day) settings.

Setting

Seconds

Hour, Minutes

12/24-Hour

Format

Year, Month, Day

Button Operation

Press D to reset to 00.

Use D (+) and A (–) to change the setting.

Press D to toggle between 12-hour (12H) and

24-hour (24H) timekeeping.

Use D (+) and A (–) to change the setting.

Screen

3. When the setting you want to change is flashing, use D and A to change it as

described below.

Stopwatch

The 1/100-second stopwatch can measure elapsed time

and lap/split times. The stopwatch uses the basic data you

input and a pacer signal to calculate the distance you

cover while jogging or running. Stopwatch times and your

distance are also stored in memory.

• The stopwatch measurement operation continues even

if you exit the Stopwatch Mode.

• Exiting the Stopwatch Mode while a lap/split time is

frozen on the display clears the lap/split time and returns

to elapsed time measurement.

• Stopwatch measurements are performed in the

Stopwatch Mode, which you enter by pressing C.

Timekeeping

Mode time

1/100 second

Seconds

Hours

Minutes

Remaining memory

How the Stopwatch Works

There are two ways you can use the stopwatch: to measure elapsed time and lap/split

times like a standard stopwatch (see “To measure times with the stopwatch”), and to

keep track of the distance you cover while jogging or running. In order to use the

stopwatch to keep track of distance, you must first perform the steps listed below.

1. Set your basic data. See “Basic Data”.

2. Turn on the pacer signal. See “To turn the pacer signal on and off”.

Note

• In order to obtain accurate distance calculations, you must set accurate basic data

and keep your exercise pace in accordance with the pacer signal emitted by the

watch.

• Use the Recall Mode to view data stored in memory.

• You can view distance covered data only by recalling it in the Recall Mode. It does

not appear on the Stopwatch Mode screen.

To measure times with the stopwatch

Note

• Pressing D to perform a lap/split time operation freezes the lap/split time at that

point on the display for about eight seconds. After that, the display returns to normal

stopwatch time measurement.

• During a stopwatch time measurement operation, the upper part of the display

shows the hour digit and the current lap/split number, the center part shows the

current split time, and the lower part shows the current lap time.

• When the pacer signal is turned on, it sounds for the first 30 seconds after you start

a stopwatch time measurement operation. After that, the pacer signal sounds for 30

seconds whenever you press B.

➤➤➤➤

ClearNext Lap/

Split

➤

A

Start Stop

Elapsed Time

Re-start Clear

A

Stop

A

A

D

Lap/Split Times

A

Start Lap/Split

D

Stop

D

A

➤

D

➤➤

• If the pacer signal does not sound even though you have it turned on, press B to

change the positions of the lap time and split time on the display. This should cause

the pacer signal to sound.

Selecting the Stopwatch Screen Format

The following shows how you can control the position of the lap time and split time on

the stopwatch screen.

• The Lap/Split indicator uses arrows to indicate the location the lap time and split

(elapsed) time.

Lap/Split number

Split

time

Lap time

➤

➤

Split time

More than 10 hours

Press B.

Lap time Hours

Minutes

Seconds

Lap/Split

indicator

• When you first start a stopwatch operation by pressing A, both the center part and

the lower part of the display show minutes, seconds, and 1/100 second. Whenever

the time shown in the lower part of the display is greater than 60 minutes, the display

format changes to show hours, minutes, and seconds. Whenever the time in the

center part of the display is greater than 10 hours, the display format changes to

show hours, minutes, and seconds.

Basic Data

The term “basic data” refers to the pacer signal setup, and information about your

stride length.

Important!

• You cannot change basic data settings while a Stopwatch Mode time measurement

operation is in progress. Stopwatch operation must be stopped and the Stopwatch

screen must be cleared to all zeros before you can change basic data settings.

• Whenever you want to change the stride length unit, you must first reset the

Cumulative Total screen to zero.

• Be sure to update basic data values whenever the person using the watch changes.

Pacer Signal

The pacer signal of this watch beeps in accordance with a pacer value (rate) set by

you. You can use the pacer signal to maintain a constant pace while jogging or

running. You can also turn off the pacer signal when you do not want to use it.

• The pacer value you set specifies the number of beeps per minute.

• Turning on the pacer signal causes the watch to beep at the rate specified by the

pacer value.

• You can set a pacer value in the range of 100 to 200 beats per minute, in units of 5.

• You can disable the pacer function by setting a pacer value of xxx. While the pacer

value is set to xxx, the watch does not calculate distance covered.

Stride Length

You can specify either centimeters (XM) or inches (Yn) as the stride length unit. The

unit you specify for the stride length unit also determines the unit of measurement

used for the distance value in the Stopwatch Mode and Recall Mode, as shown below.

MO0303-B

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Casio Timeless Collection STR-300C-1VEF Horloge. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Casio. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Casio Timeless Collection STR-300C-1VEF Horloge in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Casio Horloges
Meer handleidingen voor Horloges

Beoordeling

Veelgestelde vragen over Casio Timeless Collection STR-300C-1VEF Horloge

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Casio G-Shock GMC-B2100AD-2AER Horloge

Handleiding

Casio G-Shock GM-S2100PG-1A4ER Horloge

Handleiding

Casio Edifice EFS-S641TMS-1AER Horloge

Handleiding

Casio Timeless Collection AQ-S800WD-1EVEF Horloge

Handleiding

Casio AE-2000WD-1AEF Horloge

Handleiding

Casio G-Shock GA-010-5AER Horloge

Handleiding

Casio Pro Trek PRG-330-1EF Horloge

Handleiding

Casio LF-20W-8AEF Horloge

Gerelateerde categorieën