Handleiding Certina Urban C001.007.11.113.00 DS Podium Horloge

Handleiding

Analogue Mechanical Watches

WWW.CERTINA.COMWWW.CERTINA.COM

357_EN / 03.14 357_EN / 03.14

2/3 3/3

Congratulations

We congratulate you on choosing a CERTINA

®

watch, a Swiss brand

among the most highly renowned in the world. Meticulously designed,

using only the highest quality materials and components, your watch is

protected against shocks and impacts, variations in temperature, water

and dust and also benefits from the DS concept.

To ensure that your watch operates with perfect precision for many

years to come, we recommend that you pay careful attention to the

advice provided hereafter.

This user manual applies to all CERTINA

®

mechanical watches

(hand-wound or automatic). Please refer to the explanations relating

specifically to your watch model.

The DS (Double Security) concept is characterised by:

– an extreme shock resistance to scratches and impact,

– an ultra-resistant sapphire crystal,

– a gasket inside the crown and a gasket around the winding stem guar-

anteeing the water resistance of the watch even when the crown is

pulled out,

– a reinforced case back.

Winding

Models with screwed crown

To ensure even better water resistance, certain models are fitted with a

screwed crown. Before setting the time, winding or setting the date* or

day*, you must first unscrew the crown into position IB.

Important: After every operation, the crown must be screwed

back in to maintain the water-resistance of the watch.

Hand-wound mechanical watches

Hand-wound watches must be wound regularly by hand in order to

remain in continuous operation (e.g. every morning before putting the

watch on your wrist). To do so, pull the crown into position I and turn

it forward until it locks. The power reserve of fully wound mechanical

movements varies from 36 to 80 hours, depending on the models.

Automatic mechanical watches

Your watch must be wound manually if it has stopped or not been

worn for several days, in order to ensure that your watch remains in

continuous operation during periods of low activity (e.g. during sleep).

In these cases, turn the crown through 30 revolutions forward in

position I. The automatic winding system will then ensure that the

movement is fully wound if the watch is on your wrist. It is also

possible to fully wind an automatic watch manually by means of the

winding crown. However, please note that automatic movements have

a slipping spring, which disengages the winding system (the crown can

be turned infinitely) once the movement has been fully wound. Generally

speaking, 80 revolutions of the crown are enough to fully wind most

automatic mechanical watches.

The efficiency of the automatic winding system of a mechanical

movement depends on the wrist movements of the person

wearing the watch. Do not deliberately shake your automatic

watch to wind it; this has no effect and could damage the watch.

Settings

NB: Please take account of the information above if your watch

is fitted with a screwed crown.

Setting the time

Pull the crown out to position III and turn it in either direction until the

desired time is displayed.

On certain models with a seconds hand, you can synchronize it with an

official time signal (radio/ TV/Internet). When the crown is pulled out to

position III, the seconds hand is stopped. Once the time is synchronised,

push the crown back into position I (and screw it back in on models with

a screwed crown).

Note: certain calibres do not have a “stop seconds” mechanism.

To synchronise them, you need to turn the crown backward slightly and

hold back the tension, thereby stopping the seconds hand. You then

need only release the tension when the display matches the time signal.

Rapid correction of the date* and day*

NB: Do not perform a rapid date correction between 22:00 and

02:00.

Pull the crown out to position II and turn it clockwise until the desired

date is displayed, or counterclockwise to correct the day. During this

operation, your watch will keep operating, so you will not need to

adjust the time.

Technical information

Power reserve

CERTINA

®

Automatic watches draw their energy from an oscillating

weight which is activated in response to the natural movements of your

wrist. This weight keeps the watch wound. Automatic watches do not

need a battery. Depending on the model, the power reserve varies from

36 to 80 hours.

Accuracy

The accuracy of a mechanical watch depends on the movements

and habits of the person wearing it, and so it can vary. A CERTINA

®

qualified watchmaker can adjust the accuracy of a watch within

the CERTINA

®

tolerance thresholds. Most watches which are not

certified chronometers have an average accuracy tolerance of around

-10/+30 seconds per day.

A chronometer is a precision mechanical watch which has obtained

an official certificate issued by COSC (Contrôle Officiel Suisse des

Chronomètres), after its movement has passed several accuracy tests

in various positions and at various temperatures, as well as water-

resistance tests performed in the laboratory for 15 days and 15 nights.

To be awarded the title of chronometer, the average accuracy of a

mechanical movement must be between -4/+6 seconds per day.

Water-resistance

CERTINA

®

watches are designed to withstand a pressure of up to 3

bar (30 m / 100 ft), 5 bar (50 m / 165 ft), 10 bar (100 m / 330 ft), 20 bar

(200 m / 660 ft) or 30 bar (300 m / 1000 ft), depending on the information

shown on the case-back.

A watch cannot be permanently guaranteed absolutely water-resistant.

It may be affected by ageing of the gaskets or by an accidental impact on

the watch. We recommend that you have your watch’s water resistance

checked once a year by an approved CERTINA

®

service centre.

Care and maintenance

Temperature

Do not expose your watch to sudden temperature changes (exposure to

sunlight followed by immersion in cold water) or extreme temperatures

(over 60°C (140°F) or below 0°C (32°F).

Magnetic fields

Do not expose your watch to intense magnetic fields such as those

generated by loudspeakers, mobile phones, computers, refrigerators or

other electromagnetic appliances.

Shocks and impacts

Avoid thermal shocks or impacts, since they may harm your watch. In

the event of a violent impact please have your watch checked by an

approved CERTINA

®

service centre.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Certina Urban C001.007.11.113.00 DS Podium Horloge. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Certina. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Certina Urban C001.007.11.113.00 DS Podium Horloge in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Certina Horloges
Meer handleidingen voor Horloges

Beoordeling

Veelgestelde vragen over Certina Urban C001.007.11.113.00 DS Podium Horloge

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Certina Urban C902.451.46.011.00 DS Jubile Horloge

Handleiding

Certina Urban C029.426.11.051.00 DS-1 Big Date Horloge

Handleiding

Certina Aqua C032.434.11.057.00 DS Action Horloge

Handleiding

Certina Urban C033.234.16.118.00 DS-8 Horloge

Handleiding

Certina Urban C034.210.22.037.00 DS Podium Horloge

Handleiding

Certina Urban C035.407.11.037.00 DS Caimano Horloge

Handleiding

Certina Aqua C036.407.36.050.00 DS PH200M Horloge

Handleiding

Certina Urban C902.251.41.016.00 DS Jubile Lady Horloge

Gerelateerde categorieën