6
PREPARATION FOR USE
NOTE: All numbered items throughout this manual refer to the parts list item number
on Pages 12 to 15
1. Remove the plastic travel plug from the oil filler hole,
on the top of the crank case, and insert the dipstick
(ref. ‘A’, Fig. 6 - p.9).
2. Check the oil level is at the correct level on the
dipstick, as shown in Fig.1. Where necessary, top up
with SAE40 Compressor Oil (Available from your local
Clarke dealer).
OPERATION
NOTE: If you intend using your compressor for spraying, read also the “Helpful
Hints on Spraying” booklet - supplied with the machine.
1. Check that the mains voltage corresponds with that shown on the data sticker
on the machine.
2. Ensure that the ON/OFF knob (see Fig. 2), is in the ‘OFF’ (0) position, i.e. pushed
DOWN,then plug in and switch on at the mains supply.
Fig.1
Fig. 2
SPECIFICATIONS
Motor ...................................................................230V 50Hz 1Ph
Power Rating.......................................................2 hp (1.5kW)
Rotational Speed................................................2800 RPM
Max. Pressure ......................................................8 bar (116psi approx)
Air Displacement ................................................230l/min (8.3 cfm approx)
Receiver .......... PANTHER 25 ..............................25 LTR
PANTHER 50 ..............................50 LTR
Cyl.Head Bolt Torque M6 .................................8.80Nm
M8 .................................11.7Nm
Compressor Oil ...................................................CLARKE SAE 40
Fuse Rating ..........................................................13amps
Part No............. PANTHER 25 ..............................2320950
PANTHER 50 ..............................2320955
Duty Cycle ..........................................................S3 70%*
Should you experience any difficulties obtaining accessories, please contact the
Clarke sales department (telephone 01992 565300) for details of your nearest
dealer.
11
Please note that the details and specifications contained herein, are correct at the time of going to
print. However, CLARKE International reserve the right to change specifications at any time without
prior notice. Always consult the machine’s data plate
*Compressor motor should not run for more than 7 minutes in any 10 minute period
ACCESSORIES
Your Clarke Panther Air Compressor can be used in conjunction with a range of
optional accessories for inflating tyres, air brushing, stapling, blowing and many
other uses. For details contact your local accessory stockist. A complete kit is
available from your Clarke dealer which is ideal for almost all applications.
Please quote part number 3110165
Praat mee over dit product
Laat hier weten wat jij vindt van de Clarke Panther 50 Compressor. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.