Handleiding Clarke Ranger 35 Compressor
Handleiding voor je Clarke Ranger 35 Compressor nodig? Hieronder kun je de handleiding gratis bekijken en downloaden als PDF in het Nederlands en/of Engels. Dit product heeft 0 veelgestelde vragen, 0 comments en heeft 0 stemmen. Is dit niet de handleiding die je zoekt, neem dan contact met ons op.
Is je product kapot en biedt de handleiding geen oplossing meer? Dan kun je voor reparatie gratis terecht bij Repair Café.
Handleiding
Loading…
13
4
SAFETY PRECAUTIONS
WARNING
As with all machinery, there are certain hazards involved with their operation
and use. Exercising respect and caution will considerably lessen the risk of
personal injury. However, if normal safety precautions are overlooked, or
ignored, personal injury to the operator, or damage to property may result.
It is in your own interest to read and pay attention to the following rules:
NEVER direct a jet of air at people or animals, and NEVER discharge
compressed air against the skin. COMPRESSED AIR IS DANGEROUS,
NEVER operate your compressor with any guards removed.
NEVER carry out electrical or mechanical repairs unless you are fully qualified.
If problems occur, contact your Clarke dealer.
NEVER exert any strain on electrical cables and ensure that air hoses are not
tangled or wrapped around machinery etc.
NEVER T leave pressure in the receiver overnight, or when transporting.
NEVER adjust, or tamper with the safety valves. The maximum pressure is
factory set, and clearly marked on the machine.
NEVER operate in wet or damp conditions. Keep the machine dry at all
times. Similarly, a clean atmosphere will ensure efficient operation. Do not use
in dusty or otherwise dirty locations.
Some of the metal parts can become quite hot during operation. NEVER touch
these until the machine has cooled down.
ALWAYS adjust the pressure regulator to the recommended setting for the
particular spray gun or tool being used.
ALWAYS ensure that there is adequate ventilation and keep clear of any possible
source of ignition when spraying inflammable materials e.g. cellulose paint.
ALWAYS protect yourself. Think carefully about any potential hazards which
may be created by using the air compressor and use the appropriate
protection. e.g. Goggles will protect your eyes from flying particles. Face masks
will protect you against paint spray and/or fumes.
ALWAYS consult paint manufacturers instructions for safety and usage before
spraying any material always .
ALWAYS ensure the pressure is expelled from the air receiver, and the machine
is disconnected from the mains supply Before carrying out any maintenance.
ALWAYS ensure that the air supply is turned off at the machine outlet when
disconnecting air hoses or other equipment from your compressor. Expel all
pressurised air from within the machine and other equipment attached to it.
ALWAYS ensure that children and animals are kept well away from the
compressor and any equipment attached to it.
ALWAYS ensure that all individuals using the compressor have read and fully
understand the Operating Instructions supplied.
ALWAYS ensure that any equipment or tool used in conjunction with your
compressor, has a safety working pressure exceeding that of the machine.
✗
✗
✗
✗
✗
✔
✔
✔
✔
✔
✗
✗
✔
✔
✔
✔
✗
For Spare Parts and Service, please contact your nearest dealer,
or CLARKE International, on one of the following numbers.
PARTS & SERVICE TEL: 020 8988 7400
PARTS & SERVICE FAX: 020 8558 3622
or e-mail as follows:
PARTS: [email protected]
SERVICE: [email protected]
PARTS and SERVICE CONTACTS
COMPRESSOR
No. Description Qty Part No.
1 Head Bolt 4 CMECR3501
2 Elbow 1 CMECR3502
3 Cylinder Head 1 CMECR3503
4 Filter Unit 1 CMECR3504
5 Head Gasket (Upper) 1 CMECR3505
6 Valve Block 1 CMECR3506
7 Valve 1 CMECR3507
8 Valve 1 CMECR3508
9 Head Gasket (Lower) 1 CMECR3509
10 Screw 2 CMECR3510
11 Cylinder Block 1 CMECR3511
12 Gasket 1 CMECR3512
13 Piston Ring set 1 CMECR3513
14 Piston 1 CMECR3514
15 Gudgeon Pin 1 CMECR3515
16 Circlip 2 CMECR3516
17 Piston Assy compl. 1 CMECR3517
18 Con-Rod 1 CMECR3518
19 Washer 1 CMECR3519
20 Nut 1 CMECR3520
21 Bearing 1 CMECR3521
22 Crankshaft Assy. 1 CMECR3522
23 End Housing Gasket 1 CMECR3523
24 Dipstick 1 CMECR3524
25 End Housing 1 CMECR3525
26 Screw 1 CMECR3526
27 Screw 3 CMECR3527
28 Bolt 2 CMECR3528
29 Motor Housing 1 CMECR3529
30 Rotor 1 CMECR3530
31 Stator Assy 1 CMECR3531
32 Bearing 1 CMECR3532
33 Housing 1 CMECR3533
34 Nut 1 CMECR3534
35 Fan Assy. 1 CMECR3535
36 Cover 1 CMECR3536
37 Overload Reset 1 CMECR3537
38 Capacitor 1 CMECR3538
- Gasket Set 1 CMECR3540
No. Description Qty Part No.
Loading…
Beoordeling
Laat ons weten wat je van de Clarke Ranger 35 Compressor vindt door een beoordeling achter te laten. Wil je je ervaringen met dit product delen of een vraag stellen? Laat dan een bericht achter onderaan de pagina.Meer over deze handleiding
We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Clarke Ranger 35 Compressor. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Clarke. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Clarke Ranger 35 Compressor in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.
Specificaties
| Merk | Clarke |
| Model | Ranger 35 |
| Categorie | Compressors |
| Bestandstype | |
| Bestandsgrootte | 0.92 MB |
Alle handleidingen voor Clarke Compressors
Meer handleidingen voor Compressors
Praat mee over dit product
Laat hier weten wat jij vindt van de Clarke Ranger 35 Compressor. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.