Handleiding Clas Ohlson FL-A555 Lijmpistool

Handleiding

United Kingdom •

www.clasohlson.co.uk

English

1

4

5

67

2

3

Ver. 20220216

Gluing

Use respiratory protection.

Warning: Burnhazard. Themolten adhesive and nozzle reach

temperatures of up to 200 °C. Avoidall skin contact with

thenozzle (1) and molten adhesive whilst working.

1. Grip theglue gun by thehandle (4) and insert aglue stick (3) into thehole (2) at

therear of thegun.

2. Squeeze thetrigger (6) afew times until thefeed mechanism has gripped

thegluestick.

3. Gently squeeze thetrigger to apply molten adhesive to thesurfaces to be

glued together.

4. Release thetrigger and squeeze it again if thetrigger was squeezed all theway

in before you had finished applying glue to thecontact surfaces.

5. Release thetrigger when thesurfaces have been coated withglue.

6. Immediately press thesurfaces together and hold them in position for 15seconds.

7. Let any excess glue cool and remove it with asharpknife.

8. Unplug theglue gun from thewall socket to switch thegunoff.

9. Rest theglue gun on its stand to cool completely before putting itaway.

Warning: Donot attempt to remove theglue stick from thegluegun.

Doingso can result in personal injury and/or damage theproduct.

Care and maintenance

• Always unplug theproduct from thewall socket before cleaning.

• Clean theproduct using alightly moistenedcloth. Useonly mild cleaning

agents, never solvents or corrosive chemicals.

Responsible disposal

This symbol indicates that this product should not be disposed of with

general householdwaste. Thisapplies throughout theentire EU. Inorder

to prevent any harm to theenvironment or health hazards caused by

incorrect waste disposal, theproduct must be handed in for recycling so

that thematerial can be disposed of in aresponsible manner. Whenre-

cycling your product, take it to your local collection facility or contact

theplace of purchase. Theywill ensure that theproduct is disposed of in

anenvironmentally sound manner.

Specifications

Power supply 220−240 V AC, 50 Hz

Power 10 (60) W

Mains lead 1.4 m

Protecon class II

Warm-up me 3–5min

Glue scks Ø 7mm

Weight 0.1 kg

Glue Gun

Art.no 41-2582, 41-2583 Model FL-A555

Please read theentire instruction manual before using theproduct and then save

it for future reference. We reserve theright for any errors in text or images and any

necessary changes made to technicaldata. In theevent of technical problems or

other queries, please contact our Customer Services.

Safety

Symbolguide

Cauon! The nozzle and adjoining surfaces become hot during use.

Contact may cause burns.

Class II product. Double-insulated.

Warning for apossible hazard which could lead to serious personal injury

and/or damage to theproduct if thestated instructions are not followed.

Warning for anelectrical shock hazard.

Unplug theproduct immediately if themains lead has been damaged or

when inspectingit.

Use respiratory protection.

General safety instructions

• This product must not be used by anyone (including children) suffering from

physical or mental impairment. Thisproduct should not be used by anyone that

has not read theinstruction manual unless they have been instructed in its use

by someone who will take responsibility for their safety. Neverlet children play

with theproduct.

• Keep children away from thepackaging materials. Choking hazard.

• Theproduct should not be used if it is in any way damaged or malfunctioning.

• Never attempt to modify theproduct in anyway.

• Any repairs should only be carried out by qualified service technicians.

Electrical safety

Warning for anelectrical shock hazard.

• Do not use theproduct if it is missing parts or if its housing has been

damaged in anyway.

• Do not place theproduct where there is arisk of it falling into water or other

types of liquid.

• Theproduct should only be connected to a220−240 V, 50 Hz electrical outlet.

• Outdoor use of theproduct requires that any wall socket used be equipped with

amax 30 mA RCD. ChecktheRCD before eachuse. Useof anRCD reduces

therisk of electricshock.

• Themains lead should be checked regularly. Neveruse theproduct if themains

lead or plug is damaged.

• If themains lead has been damaged, it must only be replaced by themanufacturer,

authorised service facility or qualified tradesman. Thisis to prevent therisk of

electric shock orfire.

• Never touch themains plug if your hands are moist orwet.

• Always grip theplug when unplugging theproduct, never pull themainslead.

• Never carry or hang theproduct by its mainslead.

Product specific safety instructions

• Place theproduct in astanding position after use and let it cool sufficiently before

putting it away for storage.

• Do not leave theproduct unsupervised when it is connected to anelectrical socket.

• Never cover theproduct when it is connected to anelectrical socket.

• Never expose theproduct to rain or moisture.

• Always disconnect themains lead from thewall socket when you have finished

work or when theproduct is not beingused.

• Unplug theproduct and let it cool completely before putting it away for storage.

• Both theglue and nozzle become very hot duringuse. Thiscan cause burn injuries.

Rinse any burn with cold water and keep it under running water for sometime.

• Only use glue sticks specifically designed for this product.

• Always place theproduct on its stand when it is not inuse.

Product description

Contents

• 1 × gluegun

• 2 × glue sticks, Ø 7×100mm

Application

This glue gun can be used for gluing wood, paper, cardboard and certain plastic materials.

Gluegun

1. Nozzle

2. Glue stickhole

3. Gluestick

4. Handle

5. Mainslead

6. Trigger

7. Stand

Instructions foruse

Preparations

• Keep thework area clean and welllit.

• Clean thecontact surfaces. Thesurfaces should be dry and clear of dust or

grease. Smooth surfaces should be roughed before gluing.

• Plug theglue gun into anelectrical socket and rest it on its stand (7) for 3–5minutes

to let it reach operating temperature.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Clas Ohlson FL-A555 Lijmpistool. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Clas Ohlson. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Clas Ohlson FL-A555 Lijmpistool in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Clas Ohlson Lijmpistolen
Meer handleidingen voor Lijmpistolen

Veelgestelde vragen over Clas Ohlson FL-A555 Lijmpistool

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Beoordeling

Gerelateerde producten

Handleiding

Clas Ohlson JS-905JQ Lijmpistool

Handleiding

Stickfast GX120 Lijmpistool

Handleiding

Parkside PHP 500 B2 Lijmpistool

Handleiding

Reka TR 502 Lijmpistool

Handleiding

Parkside IAN 307134 Lijmpistool

Handleiding

Brüder Mannesmann 17220 Lijmpistool

Handleiding

Levior 89973 Lijmpistool

Handleiding

Reka TR 500 Lijmpistool

Gerelateerde categorieën