Handleiding Conair CS1001 Stijltang

Handleiding

CERAMIC

SERIES

INSTRUCTIONS

AND STYLING

GUIDE

For your safety

and continued

enjoyment of

this product,

always read the

instruction book

carefully before

using.

TOURMALINE CERAMIC

FLAT IRONS

models CS1000/CS1001 – all versions

IMPORTANT SAFETY

INSTRUCTIONS

When using electrical appliances, especially

when children are present, basic safety

precautions should always be taken, including

the following:

READ ALL INSTRUCTIONS

BEFORE USING

KEEP AWAY FROM WATER

DANGER – Any appliance is electrically

live even when the switch is off. To reduce the

risk of death by electric shock:

1. Always unplug appliance immediately

after using.

2. Do not use while bathing or in the shower.

3. Do not place or store appliance where it can

fall or be pulled into a tub or sink.

4. Do not place in, or drop into water or

other liquids.

5. If an appliance falls into water, unplug it

immediately. Do not reach into the water.

WARNING – To reduce the risk of

burns, electrocution, fire, or injury to persons:

1. This appliance should never be left

unattended when plugged in.

2. Do not pull, twist, or wrap line cord

around appliance.

3. This appliance should not be used by,

on or near children or individuals with

certain disabilities.

4. Use this appliance only for its intended

use, as described in this manual. Do not

use attachments not recommended by

the manufacturer.

5. Never operate this appliance if it has a

damaged cord or plug, if it is not working

properly or if it has been dropped, damaged,

or dropped into water. Return the appliance

to an Authorized Service Center for

examination and repair.

6. Keep the cord away from heated surfaces.

7. Never use while sleeping.

8. Never drop or insert any object into any

opening or hose.

9. Do not use outdoors or operate where aerosol

(spray) products are being used or where

oxygen is being administered.

10. Unit is hot when in use. Do not let heated

surface touch eyes or skin.

11. Do not place the heated unit directly on

any surface while it is hot or plugged in.

12. Never block the air openings of the

appliance or place it on a soft surface, such as

a bed or couch, where the air openings may

be blocked. Keep the air openings free of hair,

lint and other debris.

13. Do not use an extension cord with

this appliance.

14. Do not touch hot surfaces of the appliance.

Use handles or knobs.

15. Do not attempt to touch the housing of your

appliance near the plates, as it is hot when

in use.

16. This appliance is not a toy. Keep away

from children.

17. Do not use with a voltage converter.

SAVE THESE

INSTRUCTIONS

OPERATING

INSTRUCTIONS

This appliance is intended for household use.

Use on Alternating Current (60 hertz) only. This

unit is designed to be operated at 120V AC.

This appliance has a polarized plug (one blade is

wider than the other). As a safety feature, this

plug will fit in a polarized outlet only one way. If

the plug does not fit fully in the outlet, reverse

the plug. If it still does not fit, contact a qualified

electrician. Do not attempt to defeat this

safety feature.

NOTE: Do not use this styling appliance on

hair extensions.

STYLING WITH THE NEW TOURMALINE

CERAMIC, EASY-GLIDE FLOATING PLATES

Both plates of your new flat iron are designed

with a little give to “float” in the iron. This

provides better contact with hair and eliminates

gaps to achieve straighter results faster. The

plates of your new flat iron have a tourmaline

ceramic, easy-glide surface, the newest

technology. This means it’s not only simpler to

clean off styling product residue, etc., after each

use, but you’ll find that hair glides easily over

the surface of the plates as you straighten. The

tourmaline ceramic surface also helps smooth

down flyaways and frizzies.

It evenly distributes heat so that the style you

create has a salon-perfect, silky smooth, shiny

finish. Hair also slips right off the plates after

it's straightened.

Tourmaline ceramic has natural ions for less

frizz and more shine.

GETTING STARTED

SWITCH ACTIVATION CONTROL

IMPORTANT! This appliance features delayed

activation control. Immediately after turning the

appliance on, you are able to adjust the

temperature. After 5 seconds of the appliance

being turned on, the control buttons will

automatically lock. To adjust the controls, hold

down the heat control buttons "HIGH" or "LOW"

button for 1-2 seconds. This will deactivate the

lock mode and allow the settings to be changed.

To turn off the appliance while in lock mode,

hold down the ON/OFF button until the appliance

switches off.

Plug the iron cord into any household outlet

(120V). Press and hold the ON/OFF button for

approximately 1 second to turn the appliance

on. The unit will heat up very quickly. Press

HIGH or LOW button to select your desired

temperature. Once the temperature has stopped

blinking on the LED, the unit is ready to use.

To turn unit off, press and hold the power

ON/OFF button again until light goes off.

WARNING: The iron’s plates will get very hot

within a few seconds and should not be

placed in contact with the skin after the iron

has been turned on.

The iron’s unique 5 ultra-high heat temperature

settings and instant heat technology provide

styling versatility for all hair types. If you have

fine hair,

a low temperature will provide the best

results. If you have thick, wavy or hard-to-curl

hair, keep the heat setting on high. You can vary

the iron’s temperature according to your

particular need!

TEMPERATURE SETTING GUIDE

LED Temperature Hair Type

C

ontrol

Low 300°F Fragile Hair

Medium 340°F Fine Hair

Med-High 375°F Medium/

Normal Hair

High 410°F Wavy/Curly Hair

High/Max 455°F Textured/

Thick Hair

TO STRAIGHTEN HAIR

Hair should be clean and completely dry before

using the flat iron. For best results, use a light

styling product before blow-drying hair.

1. Start with a hair section that is 1½ inches

wide and no more than ½ inch thick.

2. Open the iron and place the hair section

between the two hot plates, close to the scalp.

Trap hair between the plates by firmly squeezing

the handles together.

3. While maintaining the tension, slowly pull the

unit down along the hair section toward the

ends. At the ends, release the pressure on the

handle and allow the hair to slide out.

4. Repeat the process on additional sections

of hair until you achieve the hairstyle you desire.

It may be necessary to repeat the process on

certain areas, depending on the texture of

your hair.

Some experience is necessary when learning to

use this flat iron. After using the iron several

times, you will learn the ideal way to straighten

and style your hair.

ADD VOLUME AND SHAPE

To add flips and waves, secure ends between

plates and wrap hair around the outer housing.

It’s an easy way to add shape to straight styles.

Turn your wrist up or under to create flips and

add curl or more body.

NOTE: Never leave your flat iron on and

unattended. However, should you fail to turn

the iron off, it will shut itself off automatically

within 60 minutes.

GET TO KNOW

YOUR FLAT IRON

Swivel Line Cord

5 Temperature

Settings

Auto Off

Single Voltage

Tourmaline

Ceramic-Coated

Plates

Temperature

Select Buttons

Power ON/OFF

Button

CS1000 - 1 in. (25mm)

CS1001 - 1¼ in. (32mm)

FEDERAL COMMUNICATIONS

COMMISSION NOTICE

WARNING: Changes or modifications to this

unit not expressly approved by the party

responsible for compliance could void the

user’s authority to operate the equipment.

This device complies with Part 15 of the FCC

Rules. Operation is subject to the following

two conditions: (1) This device may not

cause harmful interference, and (2) This

device must accept any interference received,

including interference that may cause

undesired operation.

NOTE: This equipment has been tested and

found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide

reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses and can

radiate radio frequency energy and, if not

installed and used in accordance with the

instructions, may cause harmful interference

to radio communications. However, there

is no guarantee that interference will not

occur in a particular installation. If this

equipment does cause harmful interference

to radio or television reception, which can

be determined by turning the equipment

off and on, the user is encouraged to try to

correct the interference by one or more of

the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the

equipment and receiver.

• Connect the equipment into an outlet on

a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced

radio/TV technician for help.

SUPPLIER’S DECLARATION

OF CONFORMITY

Brand: InfinitiPRO by Conair

®

Model No.: CS1000

Description: Flat Iron

Responsible Party: Conair LLC,

1 Cummings Point Road, Stamford, CT 06902

(203) 351-9000

Standards: FCC Part 15 Subpart B,

ANSI C63.4-2014

This device complies with Part 15 of the FCC

Rules. Operation is subject to the following

two conditions:

(1) This device may not cause harmful

interference, and (2) This device must

accept any interference received, including

interference that may cause undesirable

operation.

DATE OF ISSUE: MM/DD/YYYY

USER MAINTENANCE

Your appliance is virtually maintenance free.

No lubrication is needed. Keep all vents and

openings clear of dirt and dust. If cleaning

becomes necessary, disconnect the unit from

the power source, allow to cool and wipe

exterior with a cloth. If any abnormal condition

occurs, unplug the unit, allow it to cool, and

return it for repair to an Authorized Service

Center only. No repairs should be attempted by

the consumer.

CAUTION

NEVER allow the power supply cord to be pulled,

twisted, or severely bent. Never wrap the cord

tightly around the appliance. Damage will occur

at the high flex point of entry into the appliance,

causing it to rupture and short circuit. Inspect

the cord frequently for damage. Stop use

immediately if damage is visible or if unit stops

or operates intermittently.

STORAGE

When not in use, your appliance is easy to store.

Allow appliance to cool, then simply store out of

reach of children in a safe, dry location. Do not

jerk or strain cord at plug connections. Do not

wrap the line cord around the appliance. Allow

the cord to hang or lie loose and straight at the

point of entry into the appliance.

WARNING:

IF YOU THINK

THE POWER IS OFF

WHEN THE

SWITCH IS OFF,

YOU’RE WRONG.

KEEP AWAY FROM WATER

Everyone knows that electricity and water are

a dangerous combination. But did you know

that an electric appliance is still electrically

live even if the switch is off? If the plug is in,

the power is on. So when you are not using

your appliances, keep them unplugged.

ALWAYS UNPLUG

SMALL APPLIANCES

LIMITED FIVE-YEAR WARRANTY

(U.S. AND CANADA ONLY)

Conair will repair or replace (at our option) your

unit free of charge for 60 months from the date

of purchase if the appliance is defective in

workmanship or materials.

To obtain service under this warranty, return the

defective product to the service center listed on

back, together with your purchase receipt.

California residents need only provide proof of

purchase and should call 1-800-3-CONAIR for

shipping instructions. In the absence of a

purchase receipt, the warranty period shall be

60 months from the date of manufacture.

ANY IMPLIED WARRANTIES, OBLIGATIONS,

OR LIABILITIES, INCLUDING BUT NOT

LIMITED TO THE IMPLIED WARRANTY OF

MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE, SHALL BE LIMITED IN

DURATION TO THE 60-MONTH DURATION OF

THIS WRITTEN, LIMITED WARRANTY. Some

states do not allow limitations on how long an

implied warranty lasts, so the above limitations

may not apply to you.

IN NO EVENT SHALL CONAIR BE LIABLE

FOR ANY SPECIAL, INCIDENTAL, OR

CONSEQUENTIAL DAMAGES FOR BREACH OF

THIS OR ANY OTHER WARRANTY, EXPRESS OR

IMPLIED, WHATSOEVER. Some states do not

allow the exclusion or limitation of special,

incidental, or consequential damages, so the

above limitation may not apply to you.

This warranty gives you specific legal rights,

and you may also have other rights, which vary

from state to state.

BEAUTY TIPS

To achieve the looks you love and

for more great InfinitiPRO by Conair

®

products, visit infiniti.conair.com

Please register this product at

www.conair.com/registration

For info on any Conair or InfinitiPRO by Conair

product, call 1-800-3-CONAIR or visit us

on the web at www.conair.com/infiniti

Service Center

Conair LLC

Service Department

7475 N. Glen Harbor Blvd.

Glendale, AZ 85307

©2022 Conair LLC

22PA082571

IB -174 6 4 B

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Conair CS1001 Stijltang. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Conair. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Conair CS1001 Stijltang in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Conair Stijltangen
Meer handleidingen voor Stijltangen

Veelgestelde vragen over Conair CS1001 Stijltang

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.