Handleiding Cotech FIB72800v1-PT Kweeklamp

Handleiding

UNITED KINGDOM • CUSTOMER SERVICE

tel 020 8247 9300 e-mail [email protected] internet www.clasohlson.co.uk postal 10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZ

A

E

F

D

B C

Ver. 20190226

LED Grow Light

Art.no 36-7303 Model FIB72800v1-PT

Please read theentire instruction manual before using theproduct and then

save it for future reference. We reserve theright for any errors in text or images

and any necessary changes made to technical data. In theevent of technical

problems or other queries, please contact our Customer Services.

Safety

Warning:

• Do not use thelight if it or its mains lead and plug are damaged in any way.

• Thelight should only be connected to awall outlet with a230 V, 50 Hz power

supply.

• Do not mount thelight in anenvironment where it is exposed to water,

moisture or extreme temperatures.

• Never try to open theproduct, repair or modify it in any way.

Electric shock hazard

• Thebulb in this light fitting must only be replaced by aqualified electrician.

• Installation and maintenance work on theproduct involves therisk of

anelectric shock.

• If themains lead is damaged it must be replaced by a cable of identical

specifications as theoriginal.

Connecting the lights using a connection cable

This product is intended for

indoor use only.

Product description

A) Ceiling bracket ×2

B) Screw ×2

C) Wall plug ×2

D) Connector ×1

E) Mains lead ×1

F) Series connection

cable ×1

1. Mount theceiling

bracket (A) using

thescrew (B).

Use amasonry

drill and wall

plug (C) to create

ananchor hole if

necessary.

2. Press thelight fitting into

thebrackets until it clicks

into place.

Ceiling bracket (A)

3. Plug themains lead into awall socket.

Connecting several lights together

Up to 10 light fittings can be interconnected. There are two different ways of

connecting thelights together:

1. Thefirst is with aconnector, which enables thelights to be joined end to end.

2. Thesecond is using aseries connection cable, which enables thelights to be

joined about 10 cm apart (handy for corner mounting).

Connecting the lights using a connector

1. Push thesupplied connector (D) into themains socket on

thelight fitting.

2. Connect thetwo lights together. Make sure that theconnector

is securely inserted and that both lights are securely

connected to each other.

3. Repeat thesame procedure if you wish to connect

additional lights.

1. Use thesupplied series connection

cable (F) to connect thefirst light to

thesecond.

2. Repeat thesame procedure

if you wish to connect

additional lights.

Care and maintenance

• Thelight fitting should be cleaned using adry cloth or vacuum cleaner.

• Unplug thelight fitting from thewall socket if theproduct is not be used for

anextended period.

Instructions for use

Note

• Distance: Theintensity of thelight is inversely proportional to thesquare of

thedistance from thesource, which means that if you double thedistance

between thelight and anobject, only aquarter of thelight will reach

theobject. It is therefore important that thelights are as close as possible to

theplants and equally spaced.

• Plant illumination time: Most plants grow better when not exposed to

24-hour light, they also require aperiod of darkness. We recommend that

thegrow light is used with atimer.

Installation

Warning:

Ensure that there are no electrical wires or water pipes in theceiling or wall

where you intend to drill/screw.

Switch thelight fitting on and off by

pressing thepower switch.

Troubleshooting guide

Thelight

doesn’t

come on.

• Check that thelight is turned on.

• Make sure that themains lead is undamaged and is securely

connected to both thewall socket and thelight.

• Is thewall socket energised?

• Check that any interconnected lights are intact and properly

connected to each other.

Responsible disposal

This symbol indicates that this product should not be disposed of

with general household waste. This applies throughout theentire EU.

In order to prevent any harm to theenvironment or health hazards

caused by incorrect waste disposal, theproduct must be handed in

for recycling so that thematerial can be disposed of in aresponsible

manner. When recycling your product, take it to your local collection

facility or contact theplace of purchase. They will ensure that

theproduct is disposed of in anenvironmentally sound manner.

Specifications

Rated voltage 220–240 V AC, 50/60 Hz

Mains lead 1.8 m

Bulb LED

Photosynthetic photon flux

PPF 25 μmol/s

PPF/W 3 μmol/J

Class II luminaire.

Thelight bulb is not dimmable.

Handy tip

• It is agood idea to connect thelight fitting/s

to awall socket which is controlled by an

on/off switch.

Series connection

cable 15 cm

Wattage 8.5 W

IP rating IP20

Operating

temperature −30 ºC to +40 ºC

Dimensions 58×3.9×2.3 cm

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Cotech FIB72800v1-PT Kweeklamp. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Cotech. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Cotech FIB72800v1-PT Kweeklamp in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Cotech Kweeklampen
Meer handleidingen voor Kweeklampen

Beoordeling

Gerelateerde producten

Handleiding

Cotech FIB75600v1-PT Kweeklamp

Handleiding

Bio Green Florabooster LUM 200-60 Kweeklamp

Handleiding

Bio Green Florabooster LUM 200-120 Kweeklamp

Handleiding

AeroGarden Harvest Kweeklamp

Handleiding

Airam Fiora Kweeklamp

Handleiding

Hydro Crunch 600TTL-G Kweeklamp

Handleiding

Kind LED K3 Series L300 Kweeklamp

Handleiding

AeroGarden Pro100 Kweeklamp

Gerelateerde categorieën