Home > Doe-het-zelf & Verbouw > Afstandsmeters > Daewoo Afstandsmeters > Daewoo D-60 Afstandsmeter

Handleiding Daewoo D-60 Afstandsmeter

Handleiding voor je Daewoo D-60 Afstandsmeter nodig? Hieronder kun je de handleiding gratis bekijken en downloaden als PDF in het Nederlands en/of Engels. Dit product heeft 0 veelgestelde vragen, 0 comments en heeft 0 stemmen. Is dit niet de handleiding die je zoekt, neem dan contact met ons op.

Is je product kapot en biedt de handleiding geen oplossing meer? Dan kun je voor reparatie gratis terecht bij Repair Café.

Handleiding

Loading…

1/17

M/S

CLEAR

Manufactured under license of Daewoo International Corporation, Korea./

Fabricado bajo licencia de Daewoo International Corporation, Corea

www.daewoopowerproducts.com

USER'S MANUAL/ MANUAL DE USO

D-60

Laser Meter/ Medidor Láser

Thank you purchasing our Hand-held laser distance measuring instrument.

Please read the safety terms and instruction carefully before you use this products.

1. SAFETY RULES

• Please read the entire manual book before you start using the device.

• Make every effort not to look directly into the laser beam, irrespective of how low the laser power

is. Adopting such a habit will enable you to avoid potentially negative consequences in the future.

• The laser beam should point only on a horizontal plane, at a level much lower than the user’s

height. So as to avoid accidental eye exposure. Moreover, The user should not bend forward when

trying to see the beam. And the beam should be tracked on a matte surface with an appropriately

low reflection coefficient.

• The laser beam should not be obstructed by any random reflective objects. Note: reflections from

the surfaces of watches, rings and other pieces of jewellery may be equally dangerous.

• Don’t try any ways to change the performance of the laser, which would cause the danger arisen

by laser exposure. Turn on the laser only when you need to use the product. Besides, don’t look

straight at the laser light. The Laser Distance Meter needs safe keeping in case used by irrelevant

personnel.

• Looking through binoculars or another optical instrument at a laser beam reflected from surfaces

that act like a mirror(prisms, liquids, metallic surfaces)May harm your eyes.

• Laser devices should not be left unattended when they are on. If you must walk away from a laser

device, a convenient solution may be obscuring the beam.

• It is difficult to foresee everything that could happen. You need to remember that many people

have lost their sight because of their negligence, and sometimes just by pure chance. The most

important thing is to be aware of the possible consequences and to use common sense.

• Playing with laser beams by placing a dot of light on people or on dangerous(for example, flam-

mable or reactive) materials is prohibited.

• To avoid the risk of fire or electrocution, follow basic safety rules when using electric appliances

and devices, particularly in the presence of children.

• Do not use the product for purposes other than its intended use.

• Do not use the electrical appliances when taking a bath or a shower.

• Don’t irradiate anyone in darkness deliberately.

• Do not use the device near sources of heat(radiators fire)

• Don’t irradiate onto the object with high reflective surface.

• Don’t put it in the place where a child can reach it.

• Don’t repair the devices without authorization. If it is damaged, please contact with local dealers.

• Don’t use the devices in flammable and explosive environment.

• Don’t use the devices near medical instruments, Don’t use the devices a plane

• Always unplug the device (remove the batteries) when you are going to leave it unattended or

before cleaning.

• Do not clean the device with the use of corrosive cleaning agents.

• The device is not a toy, do not allow children to play with the device.

• Protect the device against penetration of water or other liquids.

• Warning! Do not look at the LEDs when the flashlight is on. The light emitted by the LEDs may

damage or irritate your eyes. Do not look directly at a source of light with the use of any optical

devices that focus the light beam.

• Retain the instruction manual and the packaging, if possible

2. OVERVIEW

Keyboard (see the right figure)

1. Starting up/ measurements key

2. Area/volume/Pythagorean/laying off function key

3. Addition/Subtraction /Unit key

4. Reference edge/ LCD Backlight Display Key

5. Clear/shutdown Key

6. Date storage/ function set key

Display screen (see the right figure)

1. Laser on indicator

2. Reference edge measuring indicator

3. Area/volume/ Legs of a triangle laying off indicator

4. Laying off function indicator

5. Battery Level indicator

6. Date storage indicator

7. Date storage number indicator

8. Signal strength indicator

9. Unit indicator (including power and cube)

10. Secondary display area

11. Main display area

3. POWER

Install / replace battery

Open the cover of the battery and put the battery into the battery compartment correctly, then close

the cover.

When the battery level is too low, the indicator for battery level will appear on the display.

Please replace new battery as soon as possible at this time.

• Alkaline battery is suggested being used. In this way, the measure of the alkaline battery will relati-

vely be reduced

• When the meter will be out of use for a long period, please take out the battery.

4. OPERATION

Turn on or Turn off the machine

When the battery is installed, the meter will be turn on. If you long press the machine will be

power off. Press the button when the meter is power off, and the machine will be turn on.

The laser light and the backlight will turn off automatically within 60 seconds and 6 minutes the

machine will be power off.

How to Set the machine.

Press button in 3 second, You will found is flickering, Press button you can set

open or close the Beam light. Continue Press button you choice to set the following function.

CAL. Adjust the error value. From -7mm to 7mm

BP. On or off the buzzer

BL. On or off the backlight

Od. On or off the outdoor type.

How to set the Reference edge

Press button to choose the position from which measurement is to be taken from the bottom or

from the top of the device.

How to set the Unit (mm/inch/ft)

Press 3 second you can change the unit from

mm / inch/ ft , The device will remember the last displayed unit.

Battery status symbol

When the three segment codes in the battery boxes all display, it indicates that the battery

level is relatively full.

The fewer segment codes displayed the lower battery level. When the boxes are empty, the

battery should be replaced.

Clear function

Press button it will be clear the measuring result of a single measurement (area or volume)

with same function in order to go to the next measurement.

How to set the backlight

Press button in 2 second, You will turn on or turn off the backlight of display.

Signal strength symbol

When the five signals symbol all displays, it means that the measuring signal strength is high.

The fewer signal symbol means the weaker measuring signal strength.

5. MEASUREMENT

Signal measurement

When the laser light is off, Press button will be turn on the laser light. Then the device will be

working. Press again you can got the measure. The device will save the normal measuring result

automatically.

Continuous measurement

Press button to turn on the laser light. And press button in 3 second, The device will be

start continuous measurement. If you want to stop continuous measurement, stop pressing the

button. During continuous measurement, the real time measurement value is shown in the main

display area. And the maximum value (MAX) and the minimum value (MIN) are displayed in the

secondary display area.

When continuous measurement in general measuring pattern, the secondary display area shows the

minimum value; when continuous measurement in functional measuring pattern, the secondary

display areas displays the maximum default of the hypotenuse measurement, and displays the

minimum default of horizontal measurement.

Press button in 3 second, You will found the memory of maximum value and the minimum value.

6. FUNCTION

Addition/Subtraction

The measurement of the single distance, area and the volume can be measured through cumulative,

regressive by the addition/subtraction. Press button you can choice addition and subtraction.

Operational symbol will be displayed in the main display area.

When the operation method is chosen, the measuring result will be operated automatically

In distance measuring pattern. The result will be shown in the main display area, and the latest

measuring result will be shown in the secondary display area; in area and volume measuring

pattern, press button to got the measurement. The result will be shown in the main display

area and the latest measuring result will be shown in the secondary display area.

Area measurement

Shortly press button until is show in the display. Press to got the first measurement,

and then press to got the second measurement. Then the device will be calculated the area

automatically and the result will be display in the main display area.

Volume measurement

Shortly press button until is show in the display. Press to got the first measurement,

and then press to got the second measurement. Press got the third measurement. Then the

device will be calculated the cube automatically and the result will be display in the main display

area.

Pythagorean measurement

Pythagorean measurement is used to measure the target distance that cannot be targeted directly

by using the Pythagorean theorem.

1. Press until is show in the display. Shortly press to got the first measurement of

bevel edge, And press again to got the second measurement of edge. The Pythagorean measu-

rement will be done automatically and the result will be display in the main display area.

2. Press until is show in the display. Shortly press got the first measurement of bevel

edge, and press again to got the second measurement of edge, And press to got the third

measurement of edge, The Pythagorean measurement will be done automatically and the result will

be display in the main display area.

3. Press until is show in the display. Shortly press to got the first measurement of

bevel edge, and press again to got the second measurement of edge, and press to got the

third measurement of edge, The Pythagorean measurement will be done automatically and the

result will be display in the main display area.

NOTICE:

• When measuring under the Pythagorean pattern, the length of bevel edge should be longer than

the right angle edge, Or the device will show an error.

Data Memory /Data Storage

Press in 2 second to enter into data storage function, and will show in the display. You can

circularly check the 20 latest data . Press button or Press button you check the 20 data

one by one.

7. TIPS CODE AND SOLUTION

During the use of the instrument, the instrument may appear the prompts as followed:

8. TECHNICAL SPECIFICATIONS

Max measuring distance: 60 m

Precision: +/- 2 mm

Min/Max measuring range: 0.03- 100 m

Batteries type: 2 AAA alkaline

Measuring time: 0.1-3 s

9. MAINTENANCE

Immersing the instrument into the water is forbidden. You can use wet and soft cloth to wipe dust

off. Don’t use erosive lotion. Clean the surface of the optical component (including the laser light

radiating window and the signal received lens) in accordance with the way used in cleaning the

glasses and the lens of cameral.

10. SERVICE

To better serve our customers, a warranty card is attached. Please keep it properly in order to enjoy

the service we deserved.

1. The product, if it is used properly without overhaul, enjoys 1- year after sales service since the

day purchased.

2. The products in the following condition can’t enjoy the warranty range:

A. The variation of network voltage is so great that the instrument is damaged.

B. The instrument is damaged by the overused or artificial reason.

C. The instrument is damaged by the vibration during transportation.

3. The user without warranty cards will be charged according to the circumstance.

4. When the user needs warranty service, he should fulfill the warranty card carefully and send to

the company.

11. STORAGE AND TRANSPORTATION

The appliance must be cleaned as described and left until it is completely dry.

It is recommended that the device be stored in its original packaging.

Protect the device against vibration and shock during transport.

12. DISPOSAL

All the packaging materials are recyclable and labeled as such. Dispose of the packaging in accor-

dance with local regulations.

The packaging materials should be kept away from children, as these materials could pose a

hazard.

Correct disposal of the appliance.

1. According to the WEEE Directive(2012/19/UE), the crossed-out wheelie bin symbol(shown on the

left)is used to label all electric and electronic devices requiring segregation.

2. Do not dispose of the spent product with domestic waste: hand it over to an electric and electro-

nic device collection and recycling centre. The crossed-out wheelie bin symbol placed on product,

instruction manual or package communicates this requirement.

3. Plastics contained in the device can be recycled in accordance with the specific marking. By

recycling materials and spent equipment you will help to protect the environment.

4. Information on electric and electronic devices collection centre is available from local government

agencies or from the dealer.

5. Worn out and dead batteries must be discarded in specially marked containers, delivered to

special waste collection points or to electronic equipment vendors.

13. CE DECLARATION OF CONFORMITY

The device has been designed, manufactured and marketed in compliance with the EMC

Directive(2014/30/EU). Therefore, the product bears the “CE” mark and has a declaration of confor-

mity, which is available to market supervision agencies for inspection.

Download de handleiding in het Nederlands en/of Engels (PDF, 0.98 MB)

(Denk aan het milieu en print deze handleiding alleen als dat echt noodzakelijk is)

Loading…