Handleiding Daewoo KOC-980T Magnetron

Handleiding

21

CONTENTS

INSTALLATION AND EARTHING INSTRUCTIONS 2

IMPORTANT SAFETY INSTRUCTIONS 3

WHICH UTENSILS CAN BE USED IN THE OVEN? 4

CONTROL PANEL 5

ACCESSORIES 6

HOW TO SET THE OVEN CONTROLS 7

GENERAL GUIDELINES 12

KEEP THE OVEN CLEAN 13

BEFORE CALLING FOR SERVICE 14

QUESTIONS AND ANSWERS 15

SPECIFICATIONS 15

PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO

EXCESSIVE MICROWAVE ENERGY

(1) Do not attempt to operate this oven with the door open since open-door operation can result in

harmful exposure to microwave energy. It is important not to override or tamper with the safety

interlocks.

(2) Do not place any object between the oven front face and the door, or allow food particles or cleaner

residue to accumulate on sealing surfaces.

(3) Must not be operated the oven if it is damaged. It is particularly important that the oven door close

properly and that there is no damage to the:

(1) Door (bent), (2) hinges and latches (broken or loosened), (3) door seals and sealing surfaces.

(4) The oven should not be adjusted or repaired by anyone except properly qualified service personnel.

It is hazardous for anyone other than a trained person to carry out any service or repair operation

which involves the removal of any cover which gives protection against exposure to microwave

energy.

INSTALLATION AND EARTHING INSTRUCTIONS

How to examine your microwave oven after unpacking.

Unpack oven, remove all packing material, and examine the

oven for any damage such as dents, broken door, latches or

cracks in the door. Do not remove the film from inside the door.

Notify dealer immediately if the oven is damaged.

Do not install if the oven is damaged.

Where to place your microwave oven.

1. Place the oven on a flat and stable surface.

2. Surface of the oven is protected by a plastic film which should

be removed before using.

3. Leave space behind and sides and upper of the oven. All air

vents should be kept a clearance.

If all vents are covered during operation, the oven may

overheat and, eventually, lead to oven failure.

4. Keep away from radio and TV sets. If the oven is located

close to a TV, radio interference may result.

5. Keep away from heating appliances and water taps. Keep the

oven away from hot air, steam or splash when choosing a

place to position it, or the insulation might be adversely

affected and breakdowns occur.

6. The minimum height of free space necessary above the top

surface of the oven is minimum 150mm.

Prior to use (If your oven has a grill element)

In order to protect your oven during transportation and storage,

the grill element is covered with a protective coating. To remove

this coating the grill element must be heated for 5 minutes. This

procedure will produce some bad odours as the protective

coating on the element disappears.

To remove the coating, use the following procedures:

1. Place an overproof and microwave safe bowl, containing

200cc of water or more, in the oven.

2. Press the °C Temp button.

3. Set the time to 5 minutes.

4. Press the start button.

5. When the 5 minutes has elapsed, an acoustic signal sounds.

Note:

The protective coating has now been removed and the oven is

ready to use. Please be aware that your oven now is very hot.

6. Open the oven door and remove the bowl with water (use

oven gloves when removing the bowl).

CHILD LOCK

To prevent child from operating the oven, install the childlock

key.

1. Touch stop button for 3 seconds.

"LOC" will show in the display and all buttons do not operate.

2. Touch stop button for 3 seconds once again, then childlock is

canceled.

- WARNING: Only allow children to use the oven without

supervision when adequate instructions have been given so that

the child is able to use the oven in a safe way and understands

the hazards of improper use.

Electrical Connection

WARNING-THIS APPLIANCE MUST BE EARTHED.

REFER TO RATING PLATE FOR VOLTAGE AND CHECK

THAT THE APPLIANCE VOLTAGE CORRESPONDS WITH

THE SUPPLY VOLTAGE IN YOUR HOME.

The flexible mains lead must be correctly connected, as below,

to a three pin plug of not less than 13 AMP capacity. You must

use a 3 pin plug which should be marked with the number BS

1363 and it should be fitted with 13 AMP fuse marked with the

number BS 1362.

We recommend the use of good quality plugs and wall sockets

that can be switched off when the machine is not in use.

IMPORTANT-The wires in the mains lead fitted to this appliance

are coloured in accordance with the following code

GREEN AND YELLOW-EARTH

BLUE-NEUTRAL

BROWN-LIVE

As the colour of the wires in the mains lead of this appliance

may not correspond with the coloured markings identifying the

terminals in your plug, proceed as follows:

Power supply

ƒUCheck your local power source. This oven requires a current

of approximately 12(8)amperes, 230V 50Hz.

ƒUPower supply cord is about 1.2 meters long.

ƒUThe voltage used must be the same as specified on this oven.

Using a higher voltage may result in a fire or other accident

causing oven damage. Using low voltage will cause slow

cooking. We are not responsible for damage resulting from

use of this oven with a voltage of ampere fuse other than

those specified.

ƒUIf the supply cord is damaged, it must be replaced by the

manufacturer or its service agent or a similarly qualified

person in order to avoid a hazard.

The wire which is coloured GREEN AND YELLOW must be

connected to the terminal in the plug which is marked with the

letter "E" or the earth symbol or coloured GREEN AND

YELLOW, or GREEN.

The wire which is coloured BLUE must be connected to the

terminal which is marked with the letter "N" or coloured BLACK,

or BLUE.

The wire which is coloured BROWN must be connected to the

terminal which is marked with the letter "L" or coloured RED , or

BROWN.

If the terminals in the plug are unmarked or you are in any doubt

as to the correct connections, consult a qualified electrician.

If you do not make the proper electrical connections you will

damage your microwave oven and possibly injure yourself.

Neither the manufacturer nor the supplier are liable if this

happens.

MOULDED PLUGS

Should it be necessary to remove a moulded on plug from the

mains cable, it should be cut off and replaced with a suitable

replacement.

The moulded plug cannot be used for any other appliance,

therefore remove the fuse and dispose immediately and safely to

prevent anyone, especially children from plugging it in to a wall

socket, which will create a safety hazard.

Should the mains lead ever require replacement, it is essential

that this operation be carried out by a qualified electrician and

should only be replaced with a flexible cord obtained from the

manufacturer.

Applicable only if moulded plug is fitted.

After replacement of a fuse in the plug, the fuse cover must be

refitted. If the fuse cover is lost, a replacement cover is obtained.

The colour of the correct replacement fuse cover is that of the

coloured insert in the base of the plug or the colour that is

embossed in words in the base of the plug recess or elsewhere

on the plug. Always state this colour when ordering a

replacement fuse cover.

Only 13 amp replacement fuses which are ASTA approved to

BS 1362 should be fitted

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Daewoo KOC-980T Magnetron. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Daewoo. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Daewoo KOC-980T Magnetron in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Daewoo Magnetrons
Meer handleidingen voor Magnetrons

Veelgestelde vragen over Daewoo KOC-980T Magnetron

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Daewoo SDA1704 Magnetron

Handleiding

Daewoo KOR6L15 Magnetron

Handleiding

Daewoo KQG-8A6K5S40 Magnetron

Handleiding

Daewoo KOR-6S20W Magnetron

Handleiding

Daewoo KOM-9P259 Magnetron

Handleiding

Daewoo KOR-8A9RC Magnetron

Handleiding

Daewoo KOR-6S3DBW Magnetron

Handleiding

Daewoo KOR6N7RS Magnetron

Gerelateerde categorieën