Handleiding Denon AVR-2311CI Receiver

Handleiding

7

ENGLISH

Basic version Advanced version InformationSimple version

About setup microphone placement

• Measurements are performed by placing the setup microphone

successively at multiple positions throughout the entire listening

area, as shown in GExample qH. For best results, we recommend

you measure in six positions, as shown in the illustration (up to six

positions).

• Even if the listening environment is small as shown in GExample wH,

measuring at multiple points throughout the listening environment

results in more effective correction.

FL SW C FR

SRSL

*

M

FL SW C FR

SRSL

*

M

(

: Measuring positions)

GExample qH GExample wH

(

: Measuring positions)

FL Front speaker (L) SW Subwoofer

FR Front speaker (R) SL Surround speaker (L)

C Center speaker SR Surround speaker (R)

About the main listening position (*M)

The main listening position is the position where listeners would

normally sit or where one would normally sit alone within the listening

environment. Before starting Audyssey Auto Setup, place the setup

microphone in the main listening position. Audyssey MultEQ

®

uses

the measurements from this position to calculate speaker distance,

level, polarity, and the optimum crossover value for the subwoofer.

The “Simple version” describes the installation, connection and setup methods for 5.1-channel speakers.

See page 32 for the installation, connection and setup methods for speakers other than 5.1-channel speakers.

Set up speakers (Audyssey

®

Auto Setup)

3

Set up the remote control unit

n Set up the zone mode

Press ZONE SELECT to switch the zone mode to

“MAIN”.

The “MAIN” indicator lights.

Press ZONE SELECT

n Set up the operation mode

Press AMP to set the remote control unit to amplier

operation mode.

Press AMP

1

Set up the microphone

Mount the setup microphone on a tripod or stand

and place it in the main listening position.

When placing the setup microphone, adjust the height of the

sound receptor to the level of the listener’s ear.

Sound receptor

Setup

microphone

NOTE

• Do not hold the setup microphone in your hand during

measurements.

• Avoid placing the setup microphone close to a seat back or wall as

sound reflections may give inaccurate results.

2

Set up the subwoofer

If using a subwoofer capable of the following

adjustments, set up the subwoofer as shown below.

n When using a subwoofer with a direct mode

Set the direct mode to “On” and disable the volume adjustment

and crossover frequency setting.

n When using a subwoofer without a direct mode

Make the following settings:

• Volume : “12 o’clock position”

• Crossover frequency : “Maximum/Highest Frequency”

• Low pass filter : “Off”

• Standby mode : “Off”

NOTE

When you use two subwoofers, please adjust the subwoofer

volume controls individually so that each subwoofer level is as close

as possible to 75 dB using the test tone (vpage59) before Audyssey

Auto Setup.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Denon AVR-2311CI Receiver. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Denon. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Denon AVR-2311CI Receiver in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Denon Receivers
Meer handleidingen voor Receivers

Beoordeling

Gerelateerde producten

Handleiding

Denon AVR-2805 Receiver

Handleiding

Denon DRA-275RD Receiver

Handleiding

Denon AVR-700RD Receiver

Handleiding

Denon DRA-700AE Receiver

Handleiding

Denon AVR-2112CI Receiver

Handleiding

Denon AVR-1905 Receiver

Handleiding

Denon AVR-1600 Receiver

Handleiding

Denon AVR-5308CI(A) Receiver

Gerelateerde categorieën