Home > Doe-het-zelf & Verbouw > Lijnlasers > DeWalt Lijnlasers > DeWalt DW088K Lijnlaser

Handleiding DeWalt DW088K Lijnlaser

Handleiding voor je DeWalt DW088K Lijnlaser nodig? Hieronder kun je de handleiding gratis bekijken en downloaden als PDF in het Nederlands en/of Engels. Dit product heeft 0 veelgestelde vragen, 0 comments en heeft 0 stemmen. Is dit niet de handleiding die je zoekt, neem dan contact met ons op.

Is je product kapot en biedt de handleiding geen oplossing meer? Dan kun je voor reparatie gratis terecht bij Repair Café.

Handleiding

INSTRUCTION MANUAL

GUIDE D’UTILISATION

MANUAL DE INSTRUCCIONES

INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA.

ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.

DeWALT Industrial Tool Co., 701 Joppa Road, Baltimore, MD 21286

Questions? See us 0n the World Wide Web at www.dewalt.com

DW087, DW088 LaserChalkLine™ Laser Line Generator

Générateurs de faisceaux laser LaserChalkLine

DW087 et DW088

Generador de línea láser LaserChalkLine

DW087, DW088

IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY DeWALT TOOL, CALL US TOLL FREE

AT: 1-800-4-DeWALT (1-800-433-9258)

Safety Instructions for Lasers

WARNING! Read and understand all instructions. Failure to follow all instructions

listed below may result in electric shock, fire and/or serious personal injury.

SAVE THESE INSTRUCTIONS

WARNING! Laser Radiation Exposure. Do not disassemble or modify the laser level. There are no

user serviceable parts inside. Serious eye injury could result.

WARNING: Hazardous Radiation. Use of controls or adjustments or performance of

procedures other than those specified herein may result in hazardous radiation exposure.

• Do not operate the laser in explosive atmospheres, such as in the presence of

flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.

• Use the laser only with the specifically designated batteries. Use of any other batteries may create a

risk of fire.

• Store idle laser out of reach of children and other untrained persons. Lasers are dangerous in the

hands of untrained users.

• Use only accessories that are recommended by the manufacturer for your model. Accessories that

may be suitable for one laser, may create a risk of injury when used on another laser.

• Tool service must be performed only by qualified repair personnel. Service or maintenance per-

formed by unqualified personnel may result in injury. To locate your nearest DeWALT service center call

1-800-4-DEWALT (1-800-433-9258) or go to http://www.dewalt.com on the Internet.

• Do not use optical tools such as a telescope or transit to view the laser beam. Serious eye injury

could result.

• Do not place the laser in a position which may cause anyone to intentionally or unintentionally

stare into the laser beam. Serious eye injury could result.

• Turn the laser off when it is not in use. Leaving the laser on increases the risk of staring into the laser

beam.

• Do not disassemble the laser tool. There are no user serviceable parts inside.

• Do not modify the laser in any way. Modifying the tool may result in Hazardous Laser Radiation

Exposure.

• Do not operate the laser around children or allow children to operate the laser. Serious eye injury

may result.

• Do not remove or deface warning labels. Removing labels increases the risk of exposure to radiation.

• Position the laser securely on a level surface. Damage to the laser or serious injury could result if the

laser falls.

WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activi-

ties contains chemi cals known to the State of California to cause cancer, birth defects, or other reproduc tive

harm. Some examples of these chemicals are:

• leadfromlead-basedpaints,

• crystallinesilicafrombricksandcementandothermasonryproducts,and

• arsenicandchromiumfromchemically-treatedlumber(CCA).

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your

exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such

as those dust masks that are specially designed to

filter out microscopic particles.

 • Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and

other construction activities. Wear protective clothing and wash exposed areas with soap and

water. Allowing dust to get into your mouth, eyes, or lay on the skin may promote absorption of harmful

chemicals.

• Thelabelonyourtoolmayincludethefollowingsymbols.

V ...................................volts

mW ...............................milliwatts

....................laser warning symbol

nm ................................wavelength in nanometers

II ...................................Class II Laser

IIIa ................................Class IIIa Laser

WARNING LABELS

For your convenience and safety, the following label is on your laser.

CAUTION: LASER RADIATION - DO NOT STARE INTO THE LASER BEAM. CLASS II LASER

PRODUCT.

CAUTION: CLASS 2 LASER RADIATION WHEN OPEN DO NOT STARE INTO THE BEAM.

Laser Information

The DW087 and DW088 LaserChalkLine™ Laser Line Generators are Class II laser products and comply with 21

CFR 1040.10 and 1040.11 except for deviations pursuant to laser notice No. 50, dated June 24, 2007.

INTRODUCTION

The DW087 and DW088 lasers are self-leveling laser tools that can be used inside and outside for horizontal

(level) vertical and plumb alignment projects.

General Safety Rules For Battery Operated Tools

WARNING! Read and understand all instructions. Failure to follow all instructions

listed below may result in electric shock, fire and/or serious personal injury.

WORK AREA

•Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.

• Do not operate laser tools in explosive atmospheres, such as in the presence of flammable liquids,

gases, or dust.

• Keep bystanders, children, and visitors away while operating a laser tool. Distractions can cause you to

lose control.

ELECTRICAL SAFETY

• Use battery operated tool only with the specifically designed batteries. Use of any other batteries may

create a risk of fire.

Battery

This tool is powered by three 1.5V AA size batteries.

To install batteries:

1. Lift up the battery compartment cover (A) as shown in Figure 1.

2. Insert three fresh AA batteries in the compartment, placing the batteries according to (+) and (–) on the

inside of the battery door.

WARNING: Batteries can explode, or leak, and can cause injury or fire. To reduce this risk:

•Carefullyfollowallinstructionsandwarningsonthebatterylabelandpackage.

• Alwaysinsertbatteriescorrectlywithregardtopolarity(+and–),markedonthebatteryandtheequip-

ment.

• Donotshortbatteryterminals.

• Donotchargebatteries.

• Donotmixoldandnewbatteries.Replaceallofthematthesametimewithnewbatteriesofthesamebrand

and type.

• Removedeadbatteriesimmediatelyanddisposeofperlocalcodes.

• Donotdisposeofbatteriesinfire.

• Keepbatteriesoutofreachofchildren.

• Removebatteriesifthedevicewillnotbeusedforseveralmonths.

PERSONAL SAFETY

• Stay alert, watch what you are doing and use common sense when operating a laser tool. Do not

use tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention

while operating power tools may result in serious personal injury.

• Do not overreach.Keepproperfootingandbalanceatalltimes.Properfootingandbalanceenablesbetter

control of the tool in unexpected situations.

• Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes, hard hat, or hear-

ing protection may be required for appropriate conditions.

TOOL USE AND CARE

• Do not use tool if switch does not turn it on or off. Any tool that cannot be controlled with the switch is

dangerous and must be repaired.

• Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the

hands of untrained users.

• Use only accessories that are recommended by the manufacturer for your model. Accessories that

may be suitable for one tool, may become hazardous when used on another tool.

SERVICE

• Tool service must be performed only by qualified repair personnel. Service or maintenance performed

by unqualified personnel could result in a risk of injury.

• When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance sec-

tion of this manual. Use of unauthorized parts or failure to follow Maintenance Instructions may create a risk

of electric shock or injury.

To locate your nearest DeWALT service center call 1-800-4-DeWALT (1-800-433-9258) or go to http://www.

dewalt.com on the Internet.

Operating Tips

 • Useonlynew,high-quality,namebrandbatteriesforbestresults.

 • Ensurebatteriesareingoodworkingcondition.Ifthelowbatteryredindicatorlightisflashing,thebat-

teries need replacement.

 • Toextendbatterylife,turnlaseroffwhennotworkingwithormarkingthebeam.

 • Toensuretheaccuracyofyourwork,checktomakesureyourlaseriscalibratedoften.SeeField Calibration

Check.

 • Beforeattemptingtousethelaser,makesureitispositionedsecurely,onasmooth,flatsurface.

 • Alwaysmarkthecenterofthebeamcreatedbythelaser.

 • Extreme temperature changes may cause movement of internal parts that can affect

accuracy. Check your accuracy often while working. See Field Calibration Check.

 • Ifthelaserhasbeendropped,checktomakesureyourlaserisstillcalibrated.SeeField Calibration Check.

LOW BATTERY INDICATION

TheDW087andDW088lasersareequippedwitharedindicatorlight(B),asshowninFigure2.Theredindicator

lights are located to the left of the ON/OFF buttons (C, D).

A flashing red indicator light indicates that the batteries are low and need to be replaced. The laser may continue

tooperateforashorttimewhilethebatteriescontinuetodrain,butthebeam(s)willquicklydim.Afterfresh

batteries are installed and the laser is turned on again, the laser beam(s) will return to full brightness and the

red indicator light will stay off. (A flashing laser beam is not caused by low batteries; see Out of Tilt Range

Indicator.)

OPERATION

To Turn the Lasers On and Off (Fig. 2)

With the laser off, place it on a flat surface. This model has two ON/OFF buttons, one for a horizontal laser line (C)

and one for a vertical laser line (D). Each laser line is powered on by pressing its ON/OFF button. The laser lines

can be powered one at a time or at the same time. Pressing the ON/OFF buttons again turns the laser lines off.

Using the Lasers

The beams are level or plumb as long as the calibration has been checked (see Field Calibration Check) and

the laser beam is not flashing (see Out of Tilt Range Indicator).

IEC 60825-1: 2007

CAUTION - CLASS 2 LASER RADIATION WHEN OPEN. DO NOT STARE INTO

THE BEAM.

COMPLIES WITH 21 CFR 1040.10 AND 1040.11 EXCEPT FOR DEVIATIONS

PURSUANT TO LASER NOTICE NO. 50 DATED JUNE 24, 2007

ADVERTENCIA - LÁSER CLASE 2 EMITE RADIACIÓN CUANDO ESTÁ

ABIERTO. NO FIJE LA VISTA EN LA HAZ.

MISE EN GARDE - RADIATIONS LASER

DE CLASSE 2 LORSQU’OUVERT;

NE PAS FIXER LE FAISCEAU.

Beoordeling

Laat ons weten wat je van de DeWalt DW088K Lijnlaser vindt door een beoordeling achter te laten. Wil je je ervaringen met dit product delen of een vraag stellen? Laat dan een bericht achter onderaan de pagina.

Bent u tevreden over de DeWalt DW088K Lijnlaser?
Ja Nee

Beoordeel dit product als eerste

0 stemmen

Praat mee over dit product

Laat hier weten wat jij vindt van de DeWalt DW088K Lijnlaser. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je DeWalt DW088K Lijnlaser. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met DeWalt. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van DeWalt DW088K Lijnlaser in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.