Handleiding Dolmar PS350C-35 Kettingzaag

Handleiding

5

S

TO

P

O

N

STOP

ON

6

5

7

9

8

Fuels / Refuelling

- Stop the engine before refuelling the chain saw.

- Do not smoke or work near open Þ res (5).

- Let the engine cool down before refuelling.

- Fuels can contain substances similar to solvents. Eyes and skin

should not come in contact with mineral oil products. Always wear

protective gloves when refuelling. Frequently clean and change

protective clothes. Do not breathe in fuel vapors. Inhalation of

fuel vapours can be hazardous to your health.

- Do not spill fuel or chain oil. When you have spilt fuel or oil im-

mediately clean the chain saw. Fuel should not come in contact

with clothes. If your clothes have come in contact with fuel,

change them ot once.

- Ensure that no fuel or chain oil oozes into the soil (environmental

protection). Use an appropriate base.

- Refuelling is not allowed in closed rooms. Fuel vapors will ac-

cumulate near the ß oor (explosion hazard).

- Ensure to Þ rmly tighten the screw plugs of the fuel and oil tanks.

- Change the place before starting the engine (at least 3 m from

the place of refuelling) (6).

- Fuel cannot be stored for an unlimited period of time. Buy only

as much as will be consumed in the near future.

- Use only approved and marked containers for the transport and

storage of fuel and chain oil. Ensure children have no access to

fuel or chain oil.

Putting into operation

- Do not work on your own. Another person must be nearby

in case of emergencies (within shouting distance).

- Ensure that there are no children or other people within the

working area. Pay attention to any animals in the working area,

as well (7).

- Before starting work the chain saw must be checked for

perfect function and operating safety according to the pre-

scriptions.

Check especially the function of the chain brake, the correct

mounting of the guide bar, the correct sharpening and tighten-

ing of the chain, the Þ rm mounting of the sprocket guard, the

easy motion of the throttle lever and the function of the throttle

lever lock, the cleanliness and dryness of the handles, and the

function of the ON/OFF switch.

- Put the chain saw only into operation if it is completely assembled.

Never use the chain saw when it is not completely assembled.

- Before starting the chain saw ensure that you have a safe footing.

- Put the chain saw into operation only as described in this instruc-

tion manual (8). Other starting methods are not allowed.

- When starting the chain saw it must be well supported and

securely held. The guide bar and chain must not be in contact

with any object.

- When working with the chain saw always hold it with both

hands. Take the back handle with the right hand and the tubu-

lar handle with the left hand. Hold the handles tightly with your

thumbs facing your Þ ngers.

- CAUTION: When releasing the throttle lever the chain will

keep on running for a short period of time (free-wheeling).

- Continuously ensure that you have a safe footing.

- Hold the chain saw such that you will not breathe in the exhaust

gas. Do not work in closed rooms (danger of poisoning).

- Switch off the chain saw immediately if you observe any

changes in its operating behavior.

- The engine must be switched off before checking the chain

tension, tightening the chain, replacing it or clearing mal-

functions (9).

- When the sawing device is hit by stones, nails or other hard

objects, switch off the engine immediately and check the

sawing device.

- When stopping work or leaving the working place switch off the

chain saw (9) and put it down such that nobody is endangered.

CAUTION: Do not put the overheated power chain

saw in dry grass or on any inß ammable objects.

The mufß er is very hot (danger of Þ re).

- CAUTION: Oil dropping from the chain or guide bar after hav-

ing stopped the saw chain will pollute the soil. Always use an

appropriate base.

● Maintenance ● Stopping work

● Refuelling ● Transport

● Sharpening the chain ● Putting out of function

3 Meter

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Dolmar PS350C-35 Kettingzaag. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Dolmar. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Dolmar PS350C-35 Kettingzaag in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Dolmar Kettingzagen
Meer handleidingen voor Kettingzagen

Veelgestelde vragen over Dolmar PS350C-35 Kettingzaag

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Beoordeling

Gerelateerde producten

Handleiding

Dolmar PS35CTLC-40 Kettingzaag

Handleiding

Dolmar ES-164 Kettingzaag

Handleiding

Dolmar ES2135A Kettingzaag

Handleiding

Dolmar 116 si Kettingzaag

Handleiding

Dolmar 119 Kettingzaag

Handleiding

Dolmar PS-352 TLC-40 Kettingzaag

Handleiding

Dolmar AS1925Z Kettingzaag

Handleiding

Dolmar 219 Kettingzaag

Gerelateerde categorieën