Handleiding Draper MW150A/SF Lasapparaat

Handleiding

–

4

–

Fumes & Gases can be harmful:

– The welding process generates hazardous fumes as

a by-product. Inhalation of these fumes is hazardous

to health.

– Keep your head away from the weld to avoid

breathing the fumes.

– If welding in confined spaces ensure adequate

ventilation and use a fume extractor.

– Welding fumes displace oxygen. The danger of

suffocation.

– By-products of welding can react with other chemical

vapours to produce a toxic/explosive environment.

Welding can cause fire or explosion:

– Arc welding and allied processes can cause fire and

explosions and precautions shall be taken to

prevent these hazards.

– Before starting a weld ensure the area is clear of

flammable materials.

– Remove any inflammables to a safe distance,

especially substances likely to generate a dangerous

vapour.

– The welding arc can cause serious burns. Avoid

contact with skin.

– Sparks and molten metal are cast out during

welding. Take precautions to prevent fire igniting and

wear protective clothing.

– Sparks and molten metal can pass through gaps. Be

aware that fire can start out of sight. Flammables in a

locked cabinet may not be safe.

– Do not weld pressurised containers.

– Do not weld tanks, drums, or other vessels until they

have been correctly cleaned/prepared for welding.

– Always have appropriate and fully maintained

fire-fighting equipment suitable for the materials used

and for use in electrical environments available in

close proximity at all times.

– Keep clothing free from oil and grease.

– Wear a hat, flame-proof apron, woolen clothing,

gloves, long sleeve tops with closed neck, trousers

(without turn-ups) to cover non-slip boots.

– Protective head and shoulder coverings should be

worn when overhead welding.

– Avoid taking any fuels with you e.g. cigarette lighters

or matches.

– Hot spots and their immediate surroundings should

be observed until their temperature has dropped to

normal.

Personal Protection:

– The body should be protected by suitable clothing.

– The use of neck protection may be necessary

against reflected radiation.

– Wear safety glasses when chipping, wire brushing,

grinding, or when near cooling welds as metal filings

or slag can be thrown up. Fully enclosed goggles are

advisable.

– Arc machines generate a magnetic field which is

detrimental to pacemaker recipients. Consult your

doctor before going near welding equipment/

operations.

– The UV and IR radiation generated by welding is

highly damaging to the eye, causing burns. This can

also affect the skin. Protect the eyes and face.

– The face and eyes shall be protected by suitable

welding shields equipped with appropriate ocular

protection filters.

– Where environments are subject to pedestrians and

traffic ensure a protective screen is used to avoid

accidental arc glare.

- Do not weld in the vicinity of children or animals and

ensure no one is looking before striking up.

– In the welding environment, damaging levels of noise

can exist. Wear hearing protection if the process

dictates.

– Do not touch hot equipment or metal. Allow the weld

time to cool, use the correct tool and wear protective

welding gauntlets.

– Wear flame retardant clothing (leather, wool, etc.).

– Take care when adjusting or maintaining the torch

that it has had time to cool sufficiently and is

disconnected.

– The arc generates

• ultra-violet radiation (can damage skin and eyes).

• visible light (can dazzle eyes and impair vision).

• infra-red (heat) radiation (can damage skin and

eyes).

– Such radiation can be direct or reflected from

surfaces such as bright metals and light coloured

objects.

Gas cylinders:

– Gas cylinders should be located or secured so that

they cannot be knocked over.

– Shield gas containers can explode if damaged. Take

care when handling.

– Ensure gas cylinders are shut-off when not in use

and between operations.

– Take care that no build-up of gas is permitted to form

in confined areas.

– Cylinders must be in an upright position at all times

during use and storage.

– The gas cylinder must never come in contact with

the electrode.

– Follow the manufacturer’s instructions for handling,

storing, and using the gas bottle correctly and safely.

– Use the correct equipment to connect the gas bottle

to the welding torch.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Draper MW150A/SF Lasapparaat. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Draper. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Draper MW150A/SF Lasapparaat in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Draper Lasapparaten
Meer handleidingen voor Lasapparaten

Veelgestelde vragen over Draper MW150A/SF Lasapparaat

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Beoordeling

Gerelateerde producten

Handleiding

Draper AW105T Lasapparaat

Handleiding

Draper AW200T Lasapparaat

Handleiding

Draper MIG100 Lasapparaat

Handleiding

Draper MW120A/SF Lasapparaat

Handleiding

Draper INV106 Lasapparaat

Handleiding

Draper AW164AT Lasapparaat

Handleiding

Draper MW170T Lasapparaat

Handleiding

Draper AW135T Lasapparaat

Gerelateerde categorieën