Handleiding Draper RFL/1000/Y Lamp

Handleiding

5.1 GENERAL SAFETY INSTRUCTIONS

General Power Tools Safety Warnings

WARNING: Read all instructions. Failure to follow all instructions listed below may result in electric

shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your mains operated (corded) power tool or battery

operated (cordless) power tool.

1) Work area safety

a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.

b) Do not operate power tools in explosive atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools create sparks which may ignite the dust

or fumes.

c) Keep children and bystanders away while operating a power tool. Distractions can

cause you to lose control.

2) Electrical Safety

a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use

any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching

outlets will reduce risk of electrical shock.

b) Avoid body contact with earthed or grounded surfaces such as pipes, radiators,

ranges and refrigerators. There is an increased risk of electric shock if your body is

earthed or grounded.

c) Do not expose power tools to rain or wet conditions. Water entering a power tool will

increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the

power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or

entangled cords increase the risk of electric shock.

e) When operating a power tool outdoors, use an extension cord suitable for outdoor

use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

f) If operating a power tool in a damp location is unavoidable, use a residual current

device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

3) Personal Safety

a) Stay alert, watch what you are doing and use common sense when operating a power

tool. Do not use a power tool while you are tired or under the influence of drugs,

alcohol or medication. A moment of inattention while operating power tools may result in

serious personal injury.

b) Use personal protective equipment. Always wear eye protection. Protective equipment

such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for

appropriate conditions will reduce personal injuries.

c) Prevent unintentional starting. Ensure the switch is in the off position before

connecting to power source and/or battery pack, picking up or carrying the tool.

Carrying power tools with your finger on the switch or energising power tools that have the

switch on invites accidents.

d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a

key left attached to a rotating part of the power tool may result in personal injury.

e) Do not overreach. Keep proper footing and balance at all times. This enables better

control of the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and

gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in

moving parts.

g) If devices are provided for the connection of dust extraction and collection facilities,

ensure these are connected and properly used. Use of dust collection can reduce dust

related hazards.

4) Power Tool Use and Care

a) Do not force the power tool. Use the correct power tool for your application. The

correct power tool will do the job better and safer at the rate for which it was designed.

b) Do not use the power tool if the switch does not turn it on and off. Any power tool that

cannot be controlled with the switch is dangerous and must be repaired.

c) Disconnect the plug from the power source and/or the battery pack from the power

tool before making any adjustments, changing accessories, or storing power tools.

Such preventive safety measures reduce the risk of starting the power tool accidentally.

d) Store idle power tools out of the reach of children and do not allow persons

unfamiliar with the power tool or these instructions to operate the power tool. Power

tools are dangerous in the hands of untrained users.

e) Maintain power tools. Check for misalignment or binding of moving parts, breakage

of parts and any other condition that may affect the power tools operation. If

damaged, have the power tool repaired before use. Many accidents are caused by

poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting

edges are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc., in accordance with these

instructions, taking into account the working conditions and the work to be

performed. Use of the power tool for operations different from intended could result in a

hazardous situation.

5) Battery Tool Use and Care

a. Recharge only with the charger specified by the manufacturer. A charger that is suitable

for one type of battery pack may create a risk of fire when used with another battery pack.

b. Use power tools only with specifically designated battery packs. Use of any other

battery packs may create a risk of injury and fire.

c. When battery pack is not in use, keep it away from other metal objects, like paper

clips, coins, keys, nails, screws or other small metal objects, that can make a

connection from one terminal to another. Shorting the battery terminals together may

cause burns or a fire.

d. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If

contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek

medical help. Liquid ejected from the battery may cause irritation or burns.

6) Service

a. Have your power tool serviced by a qualified repair person using only identical

replacement parts. This will ensure that the safety of the power tool is maintained.

5.2 ADDITIONAL SAFETY INFORMATION

– Close supervision is necessary when the unit is used by or near children. Do not use as a

toy.

– To protect against risk of electrical shock or fire, do not put unit or charger in water or other

liquid.

– Do not put this unit in a fire or near any flammable object as this may cause explosion.

– Do not drop, throw or use excessive force on the unit as it may cause permanent damage to

the product.

– Do not operate the unit if it has been wet or moist to prevent against electric shock,

explosion and/or injury to yourself and damage to the unit.

– Recharge indoors only, using only the charger supplied.

– Use the charger only in a standard electrical outlet.

– Do not attempt to disassemble the unit as this may cause damage.

– Do not shine directly into eyes.

– Unplug the charger before any routine cleaning or maintenance. Never let any liquid get

inside the unit, use only mild soap and damp cloth to clean outer surfaces of the unit.

– The built-in Li-ion battery must be recycled or disposed of properly, do not expose the

battery to fire or intense heat as it may explode.

– Do not overcharge the unit, recharge not more than 12 continuous hours.

– To assure product safety and reliability, repairs, maintenance and adjustment should be

performed by authorised service centres or other qualified service organisations, always

using identical replacement parts.

Draper Tools Limited, Hursley Road,

Chandler's Ford, Eastleigh, Hampshire. SO53 1YF. U.K.

Helpline: (023) 8049 4344

Sales Desk: (023) 8049 4333

Internet: drapertools.com

E-mail: [email protected]

General Enquiries: (023) 8026 6355

Service/Warranty Repair Agent:

For aftersales servicing or warranty repairs, please contact the

Draper Tools Helpline for details of an agent in your local area.

©Published by Draper Tools Limited.

No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means,

electronic, mechanical photocopying, recording or otherwise without prior permission in writing from Draper Tools Ltd.

These instructions accompanying the product are the original instructions. This document is part of the product,

keep it for the life of the product passing it on to any subsequent holder of the product. Read all these instructions

before assembling, operating or maintaining this product.

This manual has been compiled by Draper Tools describing the purpose for which the product has been designed,

and contains all the necessary information to ensure its correct and safe use. By following all the general safety

instructions contained in this manual, it will ensure both product and operator safety, together with longer life of the

product itself.

AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the

product.

Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper Tools

policy of continuous improvement determines the right to make modifications without prior warning.

31296 & 31583 & 87381

CONTACTS

YOUR DRAPER STOCKIST

RWTL0419

RECHARGEABLE

WORKLIGHT

4. INTRODUCTION

4.1 SCOPE

Rechargeable COB worklight with handle and pivot stand. Supplied with Micro USB to USB cable

for charging the worklight and power take off for charging mobile devices.

4.2 SPECIFICATION

Stock no....................................................................................................... 31296 & 31583 & 87381

Part no............................................................................. RFL/1000/B & RFL/1000/G & RFL/1000/Y

LED ..........................................................................................................10W flood + 5W spot COB

Luminosity ..................................................................................................................... 1000 lumens

Battery:

Type .................................................................................................................................. Li-ion

Rated Voltage .................................................................................................................... 3.7V

Rating .............................................................................................................................. 2.2Ah

Charging time ................................................................................................................... 6 hrs

Operating time............................................................................................................................ 4 hrs

IP rating .......................................................................................................................................IP44

Dimensions............................................................................................................... 196x132x60mm

Weight (worklight only) .............................................................................................................. 750g

4.3 HANDLING AND STORAGE

Do not drop the worklight as this can damage and shorten the life span of the unit.

Store in a dry location as damp conditions can damage the worklight.

Charging on a regular basis is advised to prolong the life of the battery cells.

5. HEALTH AND SAFETY INFORMATION

1. TITLE PAGE

1.1 INTRODUCTION:

USER MANUAL FOR: Rechargeable Worklight

Stock No: 31296 & 31583 & 87381

Part No: RFL/1000/B & RFL/1000/G & RFL/1000/Y

As our user manuals are continually updated, users should make sure that they use

the very latest version.

Downloads are available from: http://drapertools.com/manuals

Draper Tools Limited

Hursley Road

Chandler’s Ford

Eastleigh

Hampshire

SO53 1YF

UK

Website: drapertools.com

Product Helpline: +44 (0) 23 8049 4344

General Fax: +44 (0) 23 8026 0784

1.3 UNDERSTANDING THIS MANUALS SAFETY CONTENT:

WARNING! – Information that draws attention to the risk of injury or death.

CAUTION! – Information that draws attention to the risk of damage to the product or

surroundings.

1.4 COPYRIGHT © NOTICE:

Copyright © Draper Tools Limited.

Permission is granted to reproduce this publication for personal and educational use

only. Commercial copying, redistribution, hiring or lending is prohibited.

No part of this publication may be stored in a retrieval system or transmitted in any

other form or means without written permission from Draper Tools Limited.

In all cases this copyright notice must remain intact.

1.2 REVISIONS:

Date first published April 2019.

2. CONTENTS

1. TITLE PAGE

1.1 INTRODUCTION..........................................................................................................2

1.2 REVISION HISTORY ..................................................................................................2

1.3 UNDERSTANDING THIS MANUAL .............................................................................2

1.4 COPYRIGHT NOTICE..................................................................................................2

2. CONTENTS

2.1 CONTENTS ....................................................................................................................3

3. WARRANTY

3.1 WARRANTY.................................................................................................................4

4. INTRODUCTION

4.1 SCOPE.........................................................................................................................4

4.2 SPECIFICATION .......................................................................................................... 4

4.3 HANDLING AND STORAGE ........................................................................................ 4

5. HEALTH AND SAFETY INFORMATION

5.1 GENERAL SAFETY INSTRUCTIONS ......................................................................4-5

– 1) Work area safety .................................................................................................. 5

– 2) Electrical Safety ..................................................................................................5

– 3) Personal Safety ...................................................................................................5

– 4) Power Tool Use and Care....................................................................................5

– 5) Battery tool Use and Care ..................................................................................5

– 6) Service .................................................................................................................5

5.2 ADDITIONAL SAFETY INFORMATION .......................................................................5

6. TECHNICAL DESCRIPTION

6.1 IDENTIFICATION ......................................................................................................... 6

7. UNPACKING AND CHECKING

7.1 PACKAGING ................................................................................................................ 7

7.2 WHAT´S IN THE BOX? ................................................................................................ 7

8. ASSEMBLING THE WORKLIGHT

8.1 POWER SUPPLY......................................................................................................... 7

8.2 CHARGING ..................................................................................................................7

9. WORKLIGHT INSTRUCTION

9.1 OPERATION ................................................................................................................8

9.2 WORKLIGHT OPERATION..........................................................................................8

9.3 USB POWER TAKE OFF............................................................................................. 8

10. MAINTENANCE

10.1 MAINTENANCE ...........................................................................................................8

11. EXPLANATION OF SYMBOLS

11.1 EXPLANATION OF SYMBOLS .................................................................................... 9

12. DISPOSAL

12.1 DISPOSAL.................................................................................................................... 9

12.2 HEALTH AND SAFETY FOR BATTERIES...................................................................9

DECLARATION OF CONFORMITY .............................................................................. ENCLOSED

- 3 -

3. WARRANTY

3.1 WARRANTY

Draper tools have been carefully tested and inspected before shipment and are guaranteed to be

free from defective materials and workmanship.

Should the tool develop a fault, please return the complete tool to your nearest distributor or

contact

Draper Tools Limited, Chandler's Ford, Eastleigh, Hampshire, SO53 1YF. England.

Telephone Sales Desk: (023) 8049 4333 or Product Help Line (023) 8049 4344.

A proof of purchase must be provided with the tool.

If upon inspection it is found that the fault occurring is due to defective materials or workmanship,

repairs will be carried out free of charge. This warranty period covering labour is 12 months from

the date of purchase except where tools are hired out when the warranty period is 90 days from

the date of purchase. The warranty is extended to 24 months for parts only. This warranty does not

apply to any consumable parts, any type of battery or normal wear and tear, nor does it cover any

damage caused by misuse, careless or unsafe handling, alterations, accidents, or repairs

attempted or made by any personnel other than the authorised Draper warranty repair agent.

Note: If the tool is found not to be within the terms of warranty, repairs and carriage charges will

be quoted and made accordingly.

This warranty applies in lieu of any other warranty expressed or implied and variations of its terms

are not authorised.

Your Draper warranty is not effective unless you can produce upon request a dated receipt or

invoice to verify your proof of purchase within the warranty period.

Please note that this warranty is an additional benefit and does not affect your statutory rights.

Draper Tools Limited.

- 4 -

5. HEALTH AND SAFETY INFORMATION

- 5 -

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Draper RFL/1000/Y Lamp. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Draper. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Draper RFL/1000/Y Lamp in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Draper Lampen
Meer handleidingen voor Lampen

Beoordeling

Veelgestelde vragen over Draper RFL/1000/Y Lamp

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Draper RLED5 Lamp

Handleiding

Draper RWL/1000/Y Lamp

Handleiding

Draper RWL/1000/B Lamp

Handleiding

Draper RIL/COBV2/YW Lamp

Handleiding

Draper RLED10/3 Lamp

Handleiding

Draper RLED10 Lamp

Handleiding

Draper RWL/1000/G Lamp

Handleiding

Draper CL10F/110/B Lamp

Gerelateerde categorieën