Handleiding Drayton Digistat+2RF Thermostaat

Handleiding

Drayton

Digistat +2RF

Invensys Controls Europe

Customer Service Tel: 0845 130 5522

C

ustomer Service Fax: 0845 130 0622

T

echnical Helpline Tel: 0845 130 7722

W

ebsite: www

.

draytoncontrols.co.uk

Email: customer[email protected]

User Guide 06490097001 IssA

Programmable Room

Thermostat Wireless

24 Hour

Model: RF700/22090

Power Supply:

Battery - Thermostat

Mains - Digistat SCR

T

he Digistat +2RF thermostat is a programmable thermostat 24-Hour

product (the same program for every day of the week) which

allows you to set up to 6 time and temperature events per day.

C

lock Setting

Y

our Digistat +2RF is fitted with a real-time clock, which is pre-set

a

t the factory. You will not have to alter the time settings.

A

special feature of this real-time clock is to automatically update

the time during the summer/winter time change removing the

need to manually alter the clock.

G

eneral Operation

W

ith the unit in Auto mode (the small arrow to bottom of screen

w

ill point to Auto) the temperature can be changed for a short

time by using the + or - buttons. Changing the temperature in

this way will keep the Digistat +2RF set to your new temperature

until the next pre-programmed event (at which time it will revert

t

o programmed temperature). The temperature you are setting

w

ill flash on the screen. Once temperature is set, the unit will

r

evert to showing the current temperature. The indicator will

s

how on the screen if the heating is turned on.

User Instructions

Event 1 2 3 4 5 6

Time 6:30 8:30 12:00 14:00 16:30 22:30

Temperature 20.0 16.0 16.0 16.0 21.0 7.0

T

he Digistat +2RF thermostat is a programmable thermostat

24-Hour (the same program for every day of the week) and

allows you to set 6 time and temperature events per day.

Digistat +2RF

Pre-set Program

Y

our Digistat +2RF comes with the following default settings

pre-programmed for your convenience:

Pre-set Program 1. (9 til 5)

*The above settings can be understood using the chart below

123456

25ºC

20ºC

15

ºC

10ºC

5

º

C

06:30 08:30 12:00 14:00 16:30 22:30

Time Period

Room Temp

As you can see, at 06:30 , the heating will come on to raise the

temperature to 20ºC. At 08:30, the temperature set point is

dropped from 20ºC down to16ºC, it stays at 16ºC throughout the

day, until 16:30 when the temperature increases to 21ºC. The

temperature then drops down to a night-setback temperature of

7ºC until 06:30 when the cycle repeats for the next day

.

To adjust these times and temperatures

1. With the product operating as

normal in the Auto mode

press twice until the

display is flashing as shown.

The time will be flashing, use

the + or - buttons to adjust

the 1st time as required

(* small 1 in lower half of screen

shows which time period is being set

e.g. 1=1st period, 2 = 2nd period etc)

Congratulations!

The unit is now set correctly to follow your required timings.

Basic Settings

Your Digistat +2RF

Controls and Display Layout

What is a programmable room thermostat?

...an explanation for householders

A programmable room thermostat is both a programmer and a room

thermostat. A programmer allows you to set ‘On’ and ‘Off

’ time

periods to suit your own lifestyle. A room thermostat works by sensing

the air temperature, switching on the heating when the air

temperature falls below the thermostat setting, and switching it off

once this set temperature has been reached.

So, a programmable room thermostat lets you choose what times you

want the heating to be on, and what temperature it should reach

while it is on. It will allow you to select different temperatures in your

home at different times of the day (and days of the week) to meet

your particular needs.

Turning a programmable room thermostat to a higher setting will not

make the room heat up any faster. How quickly the room heats up

depends on the design of the heating system, for example, the size of

boiler and radiators.

Neither does the setting affect how quickly the room cools down.

Turning a programmable room thermostat to a lower setting will result

in the room being controlled at a lower temperature, and saves energy

.

The way to set and use your programmable room thermostat is to

find the lowest temperature settings that you are comfortable with at

the different times you have chosen, and then leave it alone to do its

job. The best way to do this is to set low temperatures first, say 18

o

C,

and then turn them up by one degree each day until you are

comfortable with the temperatures. You won’t have to adjust the

thermostat further. Any adjustments above these settings will waste

energy and cost you more money

.

If your heating system is a boiler with radiators, there will usually be only

one programmable room thermostat to control the whole house. But you

can have different temperatures in individual rooms by installing

thermostatic radiator valves (TRVs) on individual radiators. If you don’t

have TRVs, you should choose a temperature that is reasonable for the

whole house. If you do have TRVs, you can choose a slightly higher

setting to make sure that even the coldest room is comfortable, then

prevent any overheating in other rooms by adjusting the TRVs.

The time on the programmer must be correct. Some types have to be

adjusted in spring and autumn at the changes between Greenwich

Mean Time and British Summer Time.

Y

ou may be able to temporarily adjust the heating programme, for

example, ‘Override’, ‘Advance’ or ‘Boost’. These are explained in the

manufacturer’s instructions.

Programmable room thermostats need

a free flow of air to sense the temperature,

so they must not be covered by curtains

or blocked by furniture. Nearby electric

fires, televisions, wall or table lamps

may prevent the thermostat from

working properly.

(Fig 3)

H

ow to replace the batteries see fig 3.

R

emove the battery cover using a coin. Replace the spent

batteries with 2 x 1.5V IEC LR6 (AA) Alkaline batteries ensuring

c

orrect orientation. Replace the battery cover pressing fully home.

(Fig 1) (Fig 2)

How do I know when to change the batteries.

When the batteries start to run low a battery icon will flash in the

display, to indicate “low battery” during this time the

Digistat +2RF

will function normally (see fig 1).

Please replace batteries with 2 x 1.5V IEC LR6 (AA) Alkaline batteries.

When the battery icon alone is shown in the display, the batteries

are completely exhausted and the

Digistat +2RF will cease to

function (see fig 2). Re-activate by replacing the batteries.

Drayton

Digistat +2RF

To set a constant room temperature (Manual mode):

1. Press once, the display

shows temperature flashing

(example

20

0

C)

2. Press + or - buttons to

adjust the temperature as

required. The temperature

will stop flashing after 5

seconds and start controlling

at this temperature

3.

T

o exit manual mode press

once, to return to auto.

To change temperature for a short period (Override):

1. Press + or - buttons to

adjust set temperature. Set

temperature shown flashing

2. After 5 seconds will start

controlling at selected set

point but displays actual room

temperature. 2 chrevons

indicates override mode.

3. To exit override press

once or wait until next change

in the pre-set program.

2

. Once the time has been set

press to confirm and

u

se the + or – button to

a

djust required temperature

(temperature shown flashing)

3

. Once the temperature has

been set press to

c

onfirm and move to the next

t

ime and temperature periods

to be adjusted confirming

c

hanges by pressing

b

utton. (max 6 periods).

4

. To exit press or

until you return to auto

m

ode with the bottom arrow

pointing to auto (as shown).

Certification Mark

Dra

y

to n

Di

g

i

s

t

a

t +2R

F

Di

g

i

s

t

a

t +2R

F

Di

g

i

s

t

a

t +2R

F

Di

g

i

s

t

a

t +2R

F

Dra

y

to n

Dra

y

to n

Dra

y

to

n

A

flashing flame indicates the product is in intelligent delayed

s

tart mode (see special note).

06490097001 IssA 24-1-07 13/2/07 11:59 Page 1

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Drayton Digistat+2RF Thermostaat. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Drayton. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Drayton Digistat+2RF Thermostaat in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Drayton Thermostaten
Meer handleidingen voor Thermostaten

Veelgestelde vragen over Drayton Digistat+2RF Thermostaat

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Drayton MiStat N Thermostaat

Handleiding

Drayton MiStat Thermostaat

Handleiding

Drayton MiStat C Thermostaat

Handleiding

Drayton Digitstat+C RF Thermostaat

Handleiding

Drayton Digistat+3 Thermostaat

Handleiding

Drayton Digistat+ Thermostaat

Handleiding

Drayton Digistat+1 Thermostaat

Handleiding

Drayton Digistat+3RF Thermostaat

Gerelateerde categorieën