Handleiding Edox 56003-3-AIN Les Bémonts Ultra Slim Date Horloge

Handleiding

6

Occasional winding: if the watch has not

been worn for more than 42 hours or more,

wind it up with the crown in position 1.

2. Correcting the date: pull the crown

out to position 2, turn the crown back-

wards (forwards for references 83) and

push it back to position 1.

Correcting the day for the references

83: pull the crown out to position 2, turn

the crown backwards, then push the

crown to position 1.

3. Time setting: hours, minutes and sec-

onds. Pull the crown out to position 3. The

seconds hand will stop. Turn the crown

forwards or backwards. Synchronise the

seconds by pushing the crown back to

position 1 to coincide with a given time

signal.

Power reserve: for references 94: The

small hand places in the counter at 6

o’clock indicates the power reserve. If the

automatic mechanical watch is not worn,

the power reserve lasts for approximate

42 hours. The power reserve can be

increased by winding up the crown manu-

ally in position 1 or while wearing the

watch on the wrist by the rotation of the

oscillation mass.

Movement 805

Watch functions:

The crown has 3 positions:

1. Time setting: pull the crown in posi-

tion 3 (the watch stops), turn the crown

forwards until correct time appears. Push

the crown in position 1.

2. Date setting: pull the crown in posi-

tion 2 and turn the crown forward until

correct date appears. Push the crown in

position 1.

3. Moon setting: pull the crown in

postion 2 and turn it backwards until the

full moon appears in the center of the

moon phase window. Determine the date

of the last full moon with a calendar. Turn

the crown backwards as many moon

phases and days since the last full moon.

This is valid also for the new moon timing.

Push the crown in position 1.

Movement 47, 85, 853

Watch functions:

The crown has 2 positions:

1. Normal position (wearing posi-

tion): when the crown is positioned

against the case, the crown ensures that

the watch is water-resistant.

Occasional winding: if the watch has not

been worn for more than 42 hours or more,

wind it up with the crown in position 1.

2. Time setting: hours, minutes and sec-

onds. Pull the crown out to position 3. The

seconds hand will stop. Turn the crown for-

wards or backwards. Synchronise the

seconds by pushing the crown back to posi-

tion 1 to coincide with a given time signal.

Movement 87

Watch functions:

The crown has 2 positions:

1. Normal position (wearing posi-

tion): when the crown is positioned

against the case, the crown ensures that

the watch is water-resistant.

Occasional winding: if the watch has not

been worn for more than 42 hours or more,

wind it up with the crown in position 1.

2. Time setting: hours and minutes. Pull

the crown out to position 2. Turn the

crown forwards or backwards. Push the

crown back to position 1.

Hand-operating repeater: by pushing

the pusher-button, you start the 5 minutes

repeater mechanism: the first series of

blows strikes the hours (one tone) – the

second series of blows strikes every five

minutes (two tones). For example:

11:43 minutes: first 11 single tones – the

hours – the 8 double tones – the minutes

as 8 x 5 = 40 minutes.

Attention: let the mechanism ring

entirely before activating it again in order

to prevent damages. Do not set the time

when the ring is activated. Edox declines

all responsibilities of misuse.

Movement 90

Watch functions:

The crown has 2 positions:

1. Normal position (wearing posi-

tion): when the crown is positioned

against the case, the crown ensures that

the watch is water-resistant.

Occasional winding: if the watch has not

been worn for more than 42 hours or more,

wind it up with the crown in position 1.

2. Time setting: hours and minutes. Pull

the crown out to position 2. Turn the

crown forwards or backwards. Push the

crown back to position 1.

Moon phase adjustment: press the

push-button C until the full moon appears

in the centre of the moon aperture.

Determine the date of the last full moon by

using a calendar. Press the push-button C

as often as the number of days which

have passed since the last full moon.

Date setting (31 days): press the push-

button D until the centre hand points the

desired day.

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Edox 56003-3-AIN Les Bémonts Ultra Slim Date Horloge. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Edox. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Edox 56003-3-AIN Les Bémonts Ultra Slim Date Horloge in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Edox Horloges
Meer handleidingen voor Horloges

Veelgestelde vragen over Edox 56003-3-AIN Les Bémonts Ultra Slim Date Horloge

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Edox 10109-357RNCA-BUIRA Delfin Chronograph Horloge

Handleiding

Edox 56003-3-NIN Les Bémonts Ultra Slim Date Horloge

Handleiding

Edox 80114-3-BUIN Les Bémonts Ultra Slim Date Automatic Horloge

Handleiding

Edox 01125-CLNGN-BUNN CO-1 Carbon Chronograph Automatic Horloge

Handleiding

Edox 10242-TINNO-BUIN CO-1 Chronograph Horloge

Handleiding

Edox 80110-357RNCA-NIR Delfin Automatic Date Horloge

Handleiding

Edox 80110-357JNCA-DI Delfin Automatic Date Horloge

Handleiding

Edox 80120-3VM-VDN1 Neptunian Neptunian Automatic Horloge

Gerelateerde categorieën