Handleiding Eiki LC-X984 Beamer

Handleiding

LC-X999-984

3

IMPORTANT SAFETY INSTRUCTIONS

All the safety and operating instructions should be read

before the product is operated.

Read all of the instructions given here and retain them for

later use. Unplug this projector from AC power supply

before cleaning. Do not use liquid or aerosol cleaners. Use

a damp cloth for cleaning.

Do not use attachments not recommended by the

manufacturer as they may cause hazards.

Do not place this projector on an unstable cart, stand, or

table. The projector may fall, causing serious injury to a

child or adult, and serious damage to the projector. Use

only with a cart or stand recommended by the

manufacturer, or sold with the projector. Wall or shelf

mounting should follow the manufacturer’s instructions, and

should use a mounting kit approved by the manufacturer.

Do not expose this unit to rain or use near water... for

example, in a wet basement, near a swimming pool, etc...

Slots and openings in the back and bottom of the cabinet

are provided for ventilation, to insure reliable operation of

the equipment and to protect it from overheating.

The openings should never be covered with cloth or other

material, and the bottom opening should not be blocked by

placing the projector on a bed, sofa, rug, or other similar

surface. This projector should never be placed near or over

a radiator or heat register.

This projector should not be placed in a built-in installation

such as a bookcase unless proper ventilation is provided.

This projector should be operated only from the type of

power source indicated on the marking label. If you are not

sure of the type of power supplied, consult your authorized

dealer or local power company.

Do not overload wall outlets and extension cords as this

can result in fire or electric shock. Do not allow anything to

rest on the power cord. Do not locate this projector where

the cord may be damaged by persons walking on it.

Never push objects of any kind into this projector through

cabinet slots as they may touch dangerous voltage points

or short out parts that could result in a fire or electric shock.

Never spill liquid of any kind on the projector.

Do not attempt to service this projector yourself as opening

or removing covers may expose you to dangerous voltage

or other hazards. Refer all servicing to qualified service

personnel.

Unplug this projector from wall outlet and refer servicing to

qualified service personnel under the following conditions:

a. When the power cord or plug is damaged or frayed.

b. If liquid has been spilled into the projector.

c. If the projector has been exposed to rain or water.

d. If the projector does not operate normally by following

the operating instructions. Adjust only those controls

that are covered by the operating instructions as

improper adjustment of other controls may result in

damage and will often require extensive work by a

qualified technician to restore the projector to normal

operation.

e. If the projector has been dropped or the cabinet has

been damaged.

f. When the projector exhibits a distinct change in

performance-this indicates a need for service.

When replacement parts are required, be sure the service

technician has used replacement parts specified by the

manufacturer that have the same characteristics as the

original part. Unauthorized substitutions may result in fire,

electric shock, or injury to persons.

Upon completion of any service or repairs to this projector,

ask the service technician to perform routine safety checks

to determine that the projector is in safe operating

condition.

This projector is equipped with a

grounding type AC line plug. Should

you be unable to insert the plug into

the outlet, contact your electrician.

Do not defeat the safety purpose of

this grounding type plug.

Follow all warnings and instructions marked on the

projectors.

For added protection to the projector during a lightning

storm, or when it is left unattended and unused for long

periods of time, unplug it from the wall outlet. This will

prevent damage due to lightning and powerline surges.

An appliance and cart

combination should be moved

with care. Quick stops, excessive

force, and uneven surfaces may

cause the appliance

and cart

combination to overturn.

If the projector is to be built

into a compartment or similarily

enclosed, the minimum distances must be

maintained.

Do not cover the ventilation slot on the

projector. Heat

build-up can reduce the service life of

your projector

and can also be dangerous

.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Eiki LC-X984 Beamer. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Eiki. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Eiki LC-X984 Beamer in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Eiki Beamers
Meer handleidingen voor Beamers

Beoordeling

Veelgestelde vragen over Eiki LC-X984 Beamer

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Eiki LC-XB250A Beamer

Handleiding

Eiki EIP-WX5000L Beamer

Handleiding

Eiki LC-XNB3000N Beamer

Handleiding

Eiki LC-XIP2610 Beamer

Handleiding

Eiki LC-WUL100A Beamer

Handleiding

Eiki LC-XS25A Beamer

Handleiding

Eiki LC-WNB3000N Beamer

Handleiding

Eiki EIP-200 Beamer

Gerelateerde categorieën