Home > Zakelijke goederen > Lamineermachines > Exibel Lamineermachines > Exibel LA4K Lamineermachine

Handleiding Exibel LA4K Lamineermachine

Handleiding voor je Exibel LA4K Lamineermachine nodig? Hieronder kun je de handleiding gratis bekijken en downloaden als PDF in het Nederlands en/of Engels. Dit product heeft 0 veelgestelde vragen, 0 comments en heeft 0 stemmen. Is dit niet de handleiding die je zoekt, neem dan contact met ons op.

Is je product kapot en biedt de handleiding geen oplossing meer? Dan kun je voor reparatie gratis terecht bij Repair Café.

Handleiding

GREAT BRITAIN

For consumer contact, please visit www.clasohlson.co.uk and click on customer service.

Laminator

Art.no: 18-8021 Model: LA4K-UK

38-1922 LA4K

Please read the entire instruction manual before using the

product and save it for future reference.

We reserve the right for any errors in the text or images and

any necessary changes made to technical data.

If you have any questions regarding technical problems

please contact our Customer Services.

Safety

1. Read the entire instruction manual before use.

2. Place the laminator on a dry and level surface.

3. Make sure that there is sufficient space on the back

side of the machine so that the lamination can exit the

machine freely.

4. Do not disassemble the product and try to x it yourself.

5. Do not touch any of the

machine’s hot surfaces.

Burn injuries may result.

6. The laminator may not be

used by children without the

supervision of an adult.

7. Never use the machine

outdoors or near water.

8. Do not use warm lamination for

any material that is sensitive to

heat, like thermo-fax paper

(see g. 1).

9. Be careful not to spill liquids in

or on the laminator (see g. 2).

10. Be careful so that no metal

objects like paperclips, coins, etc.

come into the machine (see g.

3). Do not stick your ngers into

any of the machine’s openings.

11. The laminator is intended for

personal use and not to be used

continuously. We recommend

that you turn off the machine and

let it cool down for approximately

30 minutes after 30 minutes of use.

Operation

1. Connect the plug to a wall socket and set the power

switch to the ON position. The red LED will be lit while

the machine warms up.

2. The green LED will light after about 3 – 4 minutes when

the laminator is ready for use. Make sure that there is

sufficient space on the back side of the machine so that

the lamination can exit the machine freely.

3. Lift up one end of the lamination

lm and place the paper to be

laminated between the two

sheets of lm. Leave at least

3-5 mm of space at the edges

when positioning the paper. Make

sure the paper is not crooked.

4. Feed in the folded end of the

lamination lm rst into the

machine’s feed slot.

N.B. This is very important

otherwise the lamination lm can

become caught in the rollers.

5. Let the entire lamination exit

freely. Do not pull it out with force.

Let it cool before removing it.

6. Set the power switch to OFF/ABS

and remove the plug when you are nished using

the machine.

N.B.

1. Select the correct size lamination lm so that it ts the

object to be laminated.

2. We recommend that you do not place several smaller

pieces of paper in the same lamination lm.

3. Remember that the laminate’s total thickness may not

exceed 0.5 mm.

4. Do not feed in empty lamination lm.

5. Do not cut the lamination lm into smaller pieces before

feeding it through the machine.

6. Do not feed the lm into the machine at an angle.

It can become caught in the machine during the

lamination process.

7. Use only lamination lm. Never try to feed in any

other type of material.

8. If you intend to laminate in series, remember the

machine needs to rest at least 15 seconds between

every lamination.

If the lamination should

become caught

1. The machine has a feature which allows the lamination

to be able to be pulled out from the front.

2. Turn off the laminator immediately by turning the power

switch to the OFF/ABS position and remove the plug.

3. Hold the machine with one hand and pull out the

laminate with the other hand.

Care and Maintenance

Wipe the laminator with a soft moist cloth when necessary

remembering to unplug it rst. Never use strong detergents

or solvents.

Disposal

Follow local ordinances when disposing of this

product. If you are unsure of how to dispose of

this product, please contact your municipality.

Specifications

Rated voltage 220 – 240 V AC, 50 Hz

Power 330 W

Power consumption 1.5 A

Max. lamination width 230 mm

Size 317 x 75 x 80 mm

Recommended lamination

lm thickness

80 – 100 (microns)

Warm-up time ≤ 3 minutes

Speed 250 mm/min

ENGLISH

3-5 mm

Beoordeling

Laat ons weten wat je van de Exibel LA4K Lamineermachine vindt door een beoordeling achter te laten. Wil je je ervaringen met dit product delen of een vraag stellen? Laat dan een bericht achter onderaan de pagina.

Bent u tevreden over de Exibel LA4K Lamineermachine?
Ja Nee

Beoordeel dit product als eerste

0 stemmen

Praat mee over dit product

Laat hier weten wat jij vindt van de Exibel LA4K Lamineermachine. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Exibel LA4K Lamineermachine. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Exibel. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Exibel LA4K Lamineermachine in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.