Handleiding FERM CSM1003 Cirkelzaag

Handleiding

Ferm 47

EXPLODED VIEW

Circular saw

The following pictograms are used in these instructions

for use:

Denotes risk of personal injury, loss of life or

damage to the tool in case of non-observance of

the instructions in this manual.

Denotes risk of electric shock.

Carefully read this manual before using the machine.

Make sure that you know how the machine functions and

how to operate it. Maintain the machine in accordance

with the instructions to make sure it functions properly.

Keep this manual and the enclosed documentation with

the machine.

SAFETY INSTRUCTIONS

When using electric machines always observe the

safety regulations applicable in your country to

reduce the risk of fire, electric shock and personal

injury. Read the following safety instructions and

also the enclosed safety instructions.

Keep these instructions in a safe place!

BEFORE USING THE CIRCULAR SAW:

1. Check the following points:

- do the voltage of the motor correspond to the

mains voltage (appliances for a mains voltage of

230 V

- are the mains lead and the mains plug in a good

condition: solid, without any loose ends or

damage;

- if the saw blade is missing any teeth, or if it shows

any cracks, it must be replaced immediately.

- Make sure the blade is secure.

- Use this circular saw to saw only wood, wood-like

products.

2. Do not use circular saw blades wich are deformed or

damaged.

3. Do not use HSS blades.

4. Only use blades meeting the required dimensions, as

well as data and descriptions;

Never apply any blades of which the thickness is gre-

ater than that of the riving knife.

5. Do not stop the blade of a circular saw by pressing the

blade from the side.

6. Check that the blade guard can freely move and fully

closes.

7. Never lock-up the guard in the open position.

8. Never put sideward pressure on the blade. This may

cause the blade to break.

9. Be careful when cutting wood with knots, nails or

cracks in it and/or dirt on it, as these can cause the

blade to get stuck.

10. Never leave the circular saw unattended.

11. Use this circular saw to saw only wood or wood-like

products.

USING THE MACHINE:

1. Use clamps or a vice to hold the work.

2. Never remove wood chips and saw dust that is close to

the saw blade with your hands. If there are small pie-

ces of wood left between the fixed and the movable

parts, the circular saw will have to be stopped. Plug

removed from the socket, before any piece left can be

removed.

3. Check that the blade is suitable for the spindle speed

of the circular saw. Do not attempt to cut before the cir-

cular saw has reached full speed. Make sure the circu-

lar saw runs without load (i.e. is not in contact with the

work) when you switch it on. The circular saw must

have reached its full speed first.

4. Never cut wood that is thicker than the depth of the

saw blade.

5. When cutting in wooden walls or floors, check there is

no wiring or piping where you intend to cut.

6. Switch off the tool and wait until the blade has stopped

completely before moving the saw away from the work

or putting it down. Hearing protection should be worn

when using circular saw.

SWITCH OFF THE MACHINE IMMEDIATELY WHEN

YOU DISCOVER:

1. A defective mains plug or mains lead;

2. A defective switch.

3. Overheating of the circular saw.

4. Smoke or odeur caused by scorched insulation.

GB

English

2 Ferm

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je FERM CSM1003 Cirkelzaag. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met FERM. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van FERM CSM1003 Cirkelzaag in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor FERM Cirkelzagen
Meer handleidingen voor Cirkelzagen

Veelgestelde vragen over FERM CSM1003 Cirkelzaag

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

FERM CSM1028 Cirkelzaag

Handleiding

FERM MSM1035 Cirkelzaag

Handleiding

FERM CSM1018 Cirkelzaag

Handleiding

FERM CSM1019 Cirkelzaag

Handleiding

FERM CSM1002 Cirkelzaag

Handleiding

FERM CSM1030 Cirkelzaag

Handleiding

FERM CSM4001 Cirkelzaag

Handleiding

FERM CSM1026 Cirkelzaag

Gerelateerde categorieën