Home > Tuin & Terras > Bladblazers > FERM Bladblazers > FERM LBM1007 Bladblazer

Handleiding FERM LBM1007 Bladblazer

Handleiding voor je FERM LBM1007 Bladblazer nodig? Hieronder kun je de handleiding gratis bekijken en downloaden als PDF in het Nederlands en/of Engels. Dit product heeft 0 veelgestelde vragen, 0 comments en heeft 0 stemmen. Is dit niet de handleiding die je zoekt, neem dan contact met ons op.

Is je product kapot en biedt de handleiding geen oplossing meer? Dan kun je voor reparatie gratis terecht bij Repair Café.

Handleiding

2. SAFETY

Meaning of symbols marked on the product

Read the user manual before using the machine

In accordance with essential applicable safety standards of European directives.

This symbol accompanied with the words warning! and danger! draws attention to an act or condition that could lead to serious

personal injury to the operator and bystanders.

The engine continues to rotate after the unit is switched off. Rotating blade can cause severe injury

Warning! Hot surface.

Wear gloves to protect your hands

Wear safety goggles to protect your eyes

Wear ear protectors to protect against noise

Wear dust mask to protect against dust

Wear safety boots to protect against electric shocks

Keep bystanders away. Never work while people, especilly children or pets are nearby.

Never operate the blower without tube installed

Primer bulb.

Acoustic power level LWAaccordance with directive 2000/14/EC.

What to do

Read your user manual and all supplements (if any enclosed) trhoroughly before operating your unit.

• WEAR CLOSE FITTING, TOUGH WORK CLOTHING that will provide protection, such as long slacks or trousers, safety work shoes,

heavy duty work gloves, hard hat, a protective face shield, or safety glasses for eye protection and a good grade of ear plugs or other

sound barriers for hearing protection.

• REFUELIN ASAFE PLACE. Open fuel cap slowly to release any pressure which may have formed in the fuel tank. Always wipe the unit

of fuel or oil spills before starting. To prevent a fire hazard, move at least 10 feet (3 meters) from the refuelling area before starting.

• TURN UNIT OFF before setting it down, and also before installing or removing attachments.

• KEEPALL SCREWS AND FASTENERS TIGHT and the unit in good operating condition. Never operate this equipment if it is incorrectly

adjusted or not completely and securely assembled.

• KEEP HANDLES DRY, clean and free of fuel mixture.

• STORE EQUIPMENTAWAY FROM POSSIBLE IGNITION SOURCES, such as gas powered water heaters, clothes dryers, or oil-fired

furnaces, portable heaters, etc.

• ALWAYS KEEP the engine free of debris build-up.

• OPERATION OF EQUIPMENT should always be restricted to mature and correctly instructed individuals.

• ALLPERSONS WITH RESPIRATORYPROBLEMS and persons operating the blower in a very dusty environment should wear a dust

particle mask at all times. Paper dust masks are available from most paint and hardware stores.

• Operate the machine only at reasonable hours- not early in the morning or late at night when people might be disturbed. Comply with

times listed in local ordinances.

• Operate the machine at the lowest possible engine speed to do the job.

• Use rakes and brooms to loosen debris before blowing.

• In dusty conditions, slightly dampen surfaces.

Ferm 07

5. MANUTENÇÃO

Resolver problemas do motor

Filtro do ar

Fig. 8A+ 8B

ATENÇÃO! NUNCAtrabalhe com o aparelho sem o filtro de ar, o pó e a sujidade podem danificá-lo.

O filtro de ar deve ser mantido limpo. Caso se danifique deve trocá-lo.

Limpar o filtro do ar:

• Remova os 2 parafusos (A) que seguram a tampa do filtro. retire a tampa (B) e remova o filtro (C) da tampa.

• Lave o filtro com água e sabão. NÃO UTILIZE GASOLINA!

• Seque o filtro.

• Volte a instalar o filtro e a tampa.

Note: Substitua o filtro caso se encontre danificado, ou incapaz de ser limpo.

Ajuste do carburador

O carburador foi concebido para um óptimo desempenho. Caso sejam necessários ajustes, leve o seu aparelho a um profissional da Einhell.

Vela de ignição

Fig. 9

• Distância entre eléctrodos = 0,6 mm

• Binário de aperto = 12 a 15 N m. Ligue a vela de ignićčo.

Limpar o saco colector

Um saco com sujidade vai obstruir a entrada de ar, reduzindo a eficiência do aparelho.

Para limpar o saco:

• Retire o saco do aparelho.

• Abra o fecho do saco e retire o conteúdo.

• Vire o saco do avesso e sacuda-o.

Deve levar a cabo este procedimento regularmente.

• Volte a virar o saco, feche o fecho e coloque-o no sítio.

Nota: Se tiver necessidade de lavar o saco, deve fazê-lo à mão, com água morna e um detergente suave. Enxagúe e deixe secar.

Guardar o aparelho

Fig. 10

ATENÇÃO! Se os passos seguintes não forem respeitados, podem provocar a formação de verniz no carburador, dificultando o

arranque ou danificando-o.

Problema

• O motor não arranca, ou arranca mas não

funciona.

• O motor arranca mas tem pouca força.

• O motor pára bruscamente. O motor não

arranca.

• Funciona erraticamente.

• Deita muito fumo.

Causa provável

• Procedimento errado ao arrancar

• Regulação errada da mistura no

carburador.

• Vela de ignição com fuligem.

• Filtro de gasolina entupido.

• Regulação errada da alavanca da

borboleta de ar.

• Filtro do ar sujo.

• Regulação errada da mistura no

carburador.

• Regulação errada da mistura no

carburador.

• Vela de ignição com fuligem.

• Regulação errada da mistura no

carburador.

• Mistura errada de combustível.

Como resolver

• Siga as instruções do manual.

• Esclarecer o procedimento com um técnico

autorizado centro de assistência.

• Limpe ou, caso necessário, substitua a vela

de ignição.

• Substitua o filtro do ar.

• Coloque na posição "RUN".

• Remova, limpe e volte a instalar o filtro.

• Leve a unidade ao centro de assistência

para procederem ao ajuste do carburador.

• Leve a unidade ao centro de assistência

para procederem ao ajuste do carburador.

• Limpe/ajuste ou substitua a vela de ignição.

• Leve a unidade ao centro de assistência

para procederem ao ajuste do carburador.

• Utilize a mistura correcta (proporção 40:1).

46 Ferm

Beoordeling

Laat ons weten wat je van de FERM LBM1007 Bladblazer vindt door een beoordeling achter te laten. Wil je je ervaringen met dit product delen of een vraag stellen? Laat dan een bericht achter onderaan de pagina.

Bent u tevreden over de FERM LBM1007 Bladblazer?
Ja Nee

Beoordeel dit product als eerste

0 stemmen

Praat mee over dit product

Laat hier weten wat jij vindt van de FERM LBM1007 Bladblazer. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je FERM LBM1007 Bladblazer. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met FERM. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van FERM LBM1007 Bladblazer in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.