Handleiding FERM RSM4001 Reciprozaag

Handleiding

10 Ferm

OPERATIONAL SAFETY

Warning! Never use the machine for sawing asbe-

stos. If asbestos is discovered or suspected, contact

your local council for advice.

Concentrate

Routine and repetition can lead to mistakes. Remember

that a slight lack of concentration can result in serious

injuries in a split second.

Keep work area clean

Cluttered areas and benches invite injuries.

Consider the work environment

Do not expose power tools to rain or use them in damp

or wet locations. Keep work area well lit. Do not use

power tools in the presence of flammable liquids, vap-

ours or gases.

Guard against electric shock

This unit contains dangerous voltages. Use a RCD (resi-

dual current device) to provide protection against elec-

trical shock. Prevent body contact with grounded sur-

faces (e.g. pipes, radiator, ranges or refrigerators).

Keep children and pets away

Do not let children or pets come into contact with the

tool, extension cable or work area.

Do not force the tool

It will work better and safer at the rate for which it was

intended.

Use the right tool

Do not force small tools or attachments to do the job of a

heavy-duty tool. Do not use tools for purposes for which

they were not intended; for example do not use a circular

saw for cutting trees or logs.

Do not abuse cable

Never carry the tool by the cable or pull it to disconnect

it from the power socket. Keep the cable away from heat,

oil and sharp edges. Do not touch the metal plug pins

when connecting or removing the plug.

Secure Work

Use clamps or a vice to hold work. It is safer than using

your hand and it frees both hands to operate the tool. Be

aware that this saw is a powerful machine; you must use

two hands to control it.

Do not over-reach

Keep a proper footing and balance at all times.

Disconnect tools from power supply

When not in use, before servicing and when changing

accessories such as blades, bits and cutters. Always

switch off and unplug the saw from the power

supply before making adjustments or changing

blades.

Remove adjusting keys and wrenches

Ensure that they are removed from the tool before swit-

ching on.

Avoid unintentional starting

Do not carry plugged in tools with your finger on the

switch. Check that the switch is off before plugging in to

socket.

Extension cables

Use only three core earthed extension cables suitable

for the power input of the tool (minimum cable size

1.5mm2). Plug into an earthed socket only.

When using a cable reel unwind it fully. Do not use long

extension cables.

Outdoors use

If the tool is suitable to be used outdoors, only use an

extension cable intended for outdoor use and marked

accordingly. Use a RCD (residual current device) to pro-

vide protection against electrical shock. Do not use in

rain or damp conditions.

Connect a dust extraction device

Whenever there are facilities for fitting a dust of fume

extraction system, make sure it is connected and used.

Use recommended accessories

The use of any other accessory or attachment other than

recommended in the instructions or catalogue may pre-

sent a risk of personal injury. Use extension cables suita-

ble for the power input of the saw (minimum cable size

1.5mm2). When using a cable reel unwind the cable fully.

Ferm 3

SPARE PARTS

REF.NR. DESCRIPTION FERM NR.

001 ADJUSTABLE BOTTOM PLATE 408500

002 GUARD PLATE 408501

003 RUBBER SLEEVE 408502

007 BLADE HOLDER 408503

014 RECIPROCALING BAR 408504

015 SLIDING BEARING 408505

019 ADJUSTING SPEED PLATE 408506

021 LARGE COVER SHEET 408507

024 ROLLER BEARING 408508

027 ROLLER SHAFT 408509

028 GEAR WHEEL 408510

029 WASHER 408511

030 CENTRE COLUMN 408512

032 CARBON BRUSH SET 408513

033 CARBON BRUSH HOLDER 408514

037 SWITCH 408515

052 ROTOR 408516

057 STATOR 408517

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je FERM RSM4001 Reciprozaag. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met FERM. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van FERM RSM4001 Reciprozaag in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor FERM Reciprozagen
Meer handleidingen voor Reciprozagen

Veelgestelde vragen over FERM RSM4001 Reciprozaag

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

FERM RSM1010 Reciprozaag

Handleiding

FERM RSM1001 Reciprozaag

Handleiding

FERM RSM1016 Reciprozaag

Handleiding

FERM RSM1018 Reciprozaag

Handleiding

FERM RCM1002 Reciprozaag

Handleiding

FERM RCM1001 Reciprozaag

Handleiding

FERM RSM4002 Reciprozaag

Handleiding

FERM RSM1015 Reciprozaag

Gerelateerde categorieën