Handleiding Futaba 4EX RC Controller
Handleiding voor je Futaba 4EX RC Controller nodig? Hieronder kun je de handleiding gratis bekijken en downloaden als PDF in het Nederlands en/of Engels. Dit product heeft 0 veelgestelde vragen, 0 comments en heeft 0 stemmen. Is dit niet de handleiding die je zoekt, neem dan contact met ons op.
Is je product kapot en biedt de handleiding geen oplossing meer? Dan kun je voor reparatie gratis terecht bij Repair Café.
Handleiding
Loading…
33
GLOSSARYGLOSSARY
It will be helpful to understand the following terms before reading the rest of the manual. The terms are not in alphabetical
order, but are in a logical order that prepares the reader for understanding the next term.
Reversing (servo reversing) -
Reversing (servo reversing) - A function that allows the user to determine the direction of response of each servo. If, after
hooking up the servos, a control on the model responds in the wrong direction, the user may change the servo's direction so
the control responds correctly.
Throw -
Throw - When speaking of a control surface (such as an elevator or aileron), the throw is
the distance the surface moves. Control surface throw is usually measured at the trailing
edge of the surface and is expressed in inches or millimeters. The model in the diagram has
1/2" [13mm] of up elevator throw. Throw can also refer to the distance a servo arm (or
wheel) travels.
End point adjustment (E.P.A.) -
End point adjustment (E.P.A.) - Sets the overall, maximum distance the servo rotates in
either direction.
Exponential -Exponential - Normally, servos respond proportionally to control stick input from the transmitter (e.g., if the stick is moved
halfway, the servo will move halfway). However, with
“exponential,” the servo can be made to move more or less than initial
stick movement (less servo movement is more common). Exponentials are commonly used to
“soften,” or decrease initial
servo travel for the ailerons, elevators and rudder. This way, initial control stick inputs from the pilot result in small servo
movement for a smoother flying airplane.
Mixing -
Mixing - Two (or more) servos can be made to operate together either by mechanically joining the wires (with a Y-connector)
or by electronically “joining” them through programming functions (WING mixing) in the transmitter. When servos are
electronically joined via programming, they are said to be “mixed.” Each servo’s end points can be independently set.
CONTENTS AND SPECIFICATIONSCONTENTS AND SPECIFICATIONS
Transmitter: T4EXTransmitter: T4EX
T4EX Transmitter with 4-model memory.
Transmitting on 29, 35, 36, 40, 41, or 72 MHz band.
Operating system: 2-stick, 4-channel system
Modulation: FM(Frequency modulation)
Power supply: 9.6V NT8S600B Ni-Cd battery or 12V alkaline battery
Current drain: 250mA
Receiver: R127DF, R136F, R124F, or R114FReceiver: R127DF, R136F, R124F, or R114F
R127DF FM Dual conversion 7 channel receiver.
R136F FM 6 channel receiver.
R124F/R114F FM 4 channel micro receiver.
Receiving on 29, 35, 36, 40, 41, or 72 MHz band.
Intermediate frequencies: 455kHz (R127DF- 10.7MHz/455kHz)
Power requirement: 4.8V or 6V (R124F/R114F- 4.8V)
Current drain: 9.5mA @ 4.8V (R124F/R114F- 6mA @ 4.8V)
Size: R127DF- 1.39x2.52x0.82" (35.3x64.0x20.8mm)/
R136F- 1.31x1.98x0.71" (33.4x50.3x18.1mm)/
R124F- 1.31x0.64x0.62" (33.2x16.2x15.7mm)/
R136F- 0.86x1.25x0.53" (21.8x31.7x13.5mm)/
Weight: R127DF- 1.5oz (42.5g) / R136F- 0.98oz (27.8g) /
R124F- 0.30oz (8.5g) / R114F- 0.38oz (10.9g)
Servos: S3004, S3003, S3109M, or S3108Servos: S3004, S3003, S3109M, or S3108
S3004 ball bearing/S3003 standard servo
S3109M/S3108 micro servo
With mounting hardware and servo arm assortment.
Control system: Pulse width control,1.52ms neutral
Power requirement: 4.8 or 6V from receiver (S3109M/S3108- 4.8V)
Output torque: S3004/S3003- 44.4oz-in [3.2kg-cm] @4.8V
S3109M- 6.25oz-in [0.45kg-cm] @4.8V
S3108- 16.7oz-in [1.2kg-cm] @4.8V
Operating speed: S3004/S3003- 0.23sec/60°@4.8V
S3109M- 0.14sec/60
°@4.8V
S3108- 0.12sec/60
°@4.8V
Size: S3004/S3003- 1.59x0.78x1.41" [40.4x19.8x36mm]
S3109M/S3108- 0.86x0.43x0.78" [21.8x11x19.8mm]
Weight: S3004- 1.3oz (37.2g) / S3003- 1.3oz (38.0g) /
S3109M- 0.22oz (6.3g) / S3108- 0.27oz (7.6g)
Other components:Other components:
Switch harness
9"[200mm]aileron extension cord (to facilitate quick connecting and
disconnecting of aileron servo with removable wing)
Instruction manual
*Specifications and ratings are subject to change without notice
Loading…
Beoordeling
Laat ons weten wat je van de Futaba 4EX RC Controller vindt door een beoordeling achter te laten. Wil je je ervaringen met dit product delen of een vraag stellen? Laat dan een bericht achter onderaan de pagina.Meer over deze handleiding
We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Futaba 4EX RC Controller. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Futaba. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Futaba 4EX RC Controller in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.
Specificaties
| Merk | Futaba |
| Model | 4EX |
| Categorie | RC Controllers |
| Bestandstype | |
| Bestandsgrootte | 3.17 MB |
Alle handleidingen voor Futaba RC Controllers
Meer handleidingen voor RC Controllers
Praat mee over dit product
Laat hier weten wat jij vindt van de Futaba 4EX RC Controller. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.