Home > Hobby & Vrije tijd > RC Controllers > Futaba RC Controllers > Futaba 9CAP Super RC Controller

Handleiding Futaba 9CAP Super RC Controller

Handleiding voor je Futaba 9CAP Super RC Controller nodig? Hieronder kun je de handleiding gratis bekijken en downloaden als PDF in het Nederlands en/of Engels. Dit product heeft 0 veelgestelde vragen, 0 comments en heeft 0 stemmen. Is dit niet de handleiding die je zoekt, neem dan contact met ons op.

Is je product kapot en biedt de handleiding geen oplossing meer? Dan kun je voor reparatie gratis terecht bij Repair Café.

Handleiding

MODULE: TP72-FM

• Module may be easily removed and a module on a different channel (or even band) reinserted to change the frequency on

which the 9C super transmits.

• Module transmits both FM (PPM) and PCM. No need for a second module.

• All transmission circuitry is included in the module, so no retuning is needed when changing channels or even bands.

• Frequency band is changed by inserting a module on the proper band, including for international or ground model use.

• In North America it is against FCC regulation to change the crystal within the transmitter module to a different

channel. All such transmitter crystal changes must be performed by a certified radio technician. Failure to properly tune

a system to its new channel may result in decreased range and may also result in interference to other types of frequency

users on adjoining channels. Doing so also voids your AMA insurance.

• The FSS synthesized module for the 9Z family of radios is NOT compatible with the 9Csuper.

• Radio system beeps and RF

LIGHT goes out to indicate module is not installed and radio is not transmitting.

• Non-Futaba brand modules are not FCC certified for use with this radio and therefore are against FCC regulation to use.

Doing so also voids your AMA insurance.

• TP75FM modules may also be used with the 9C super for ground use modules such as robotics, rocketry, trains, cars, and

boats.

RECEIVER: R138/R148/R149

• The R138 or R148 FM 8-channel or the R138 PCM 8-channel or R149 PCM 9-channel receiver included with your

system is a high-sensitivity narrow-band dual-conversion receiver.

• Note that your 9C super transmitter is capable of transmission on both PPM (FM) and PCM with just a simple program-

ming change and just turning the transmitter off and back on. (See p. 30.)

• Any Futaba narrow band FM receiver (all produced after 1991) on the correct frequency band and frequency may be used

with the 9C super.

• Any Futaba PCM 1024 receiver on the right frequency band and frequency may be used with the 9C super (all 1024

receivers say PCM1024; receivers which say PCM but not 1024 are 512 resolution and not compatible).

NEVER attempt to change a receiver’s band by simply changing crystal (IE removing a 72MHz crystal and inserting

a 75MHz crystal). A receiver that has a crystal installed from a different frequency band without retuning will not

receive properly and will have dramatically decreased range.

• In North America the receiver included with this system may have its frequency changed by simply changing the crystal

as long as it remains in the same half the band. A low band receiver between channels 11 and 35 may be changed to any

other channel between 11 and 35 without requiring any tuning. A high band receiver between channels 36 and 60 may

similarly be changed. Receivers being changed from a high band channel to a low band or vice versa require proper

tuning and service by the Futaba Service Center.

SERVOS

• Please see technical specifications page for specifics on the servos included with your system.

• The included receiver is compatible with all J-plug Futaba servos, including retract, winch, and digital servos.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Futaba 9CAP Super RC Controller. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Futaba. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Futaba 9CAP Super RC Controller in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Merk	Futaba
Model	9CAP Super
Categorie	RC Controllers
Bestandstype	PDF
Bestandsgrootte	4.76 MB

Alle handleidingen voor Futaba RC Controllers
Meer handleidingen voor RC Controllers

Beoordeling

Laat ons weten wat je van de Futaba 9CAP Super RC Controller vindt door een beoordeling achter te laten. Wil je je ervaringen met dit product delen of een vraag stellen? Laat dan een bericht achter onderaan de pagina.

Bent u tevreden over de Futaba 9CAP Super RC Controller?
Ja Nee

Beoordeel dit product als eerste

0 stemmen

Praat mee over dit product

Laat hier weten wat jij vindt van de Futaba 9CAP Super RC Controller. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.