Handleiding Futaba FP-9VAP RC Controller

Handleiding

ADJUSTMENTS AND FLIGHT TECHNIQUES

DUAL RATE

Dual Rate functions allow the modeler to switch servo travel limits in flight, thus varying

the control sensitivity for different flight conditions or maneuvers.

• Dual Rate functions are available on CH1 (Aileron), CH2 (Elevator), and CH4 (Rudder).

• Dual Rate ON (Low Rate) limits can be adjusted from 30% to 100% of full throw.

•

If

servo

travel

is

reduced by

ATV,

the D/R ON throw

will

be

30%

to

100% of the

limit

set

by

ATV

(in

D/R OFF). If AFR is used, the D/R ON limit is unaffected, and will be 30% to 110% of normal (full)

throw.

• Dual Rate ON limits can be adjusted independently in each direction from neutral.

•There are three D/R ON/OFF Switches. Control of the three D/R functions can be assigned to these

switches in any combination the modeler desires, or D/R functions can be switched ON and OFF auto-

matically according to the position of the Throttle stick.

•The

ON/OFF directions

of

the

D/R

Switches can

be

reversed

using

the

PARAMETERS program screen

(See page 43).

• In the AUTO D/R mode, the D/R functions can be turned ON and OFF according to the position

(adjustable) of the throttle stick.

•The

Trimmer

Panel

has

D/R

sub trimmers for CH1 (AIL) and CH2 (ELV). The D/R ON limits

can

be

trimmed ± 25% of the amount set on the screen using these trimmers. The characters in ( ) on the far

right

side

of

the

screen

(CH1 and CH2

only)

indicate

the

actual

set

amount

(the

amount

set

with

the

program keys ± the sub trimmer setting).

Setting Method

1) Select the EDIT screen, then select the DUAL

RATE screen with the program key.

2) Select the channel to be set with the

or

cursor key.

3) Move the cursor to the

position with the

or cursor key and press the or

program key to activate or deactivate the

D/R function for that channel.

key is pressed, "ON"or "OFF"

will be displayed in the "INH" position, de-

pending upon the position of the pertinent

D/R ON/OFF switch.

and cursor keys, move the

cursor to the L/D or R/U position and set

the

desired D/R ON throw with the or

program keys. Pressing the pro-

gram key will return the set limit to 100%.

100%.

"sw" position with the or key and

selecting switch No. 1, 2, or 3 with the

,or

program key.

4) When the

The D/R ON/OFF Switches are designated

by

numbers as follows:

1 ... Aileron D/R

As designated on the

transmitter front.

2 ... Elevator D/R

3... Rudder D/R

Each switch may be used to control one, two, or

all three D/R functions as desired.

7) Field adjustment of the D/R ON limits is

convenient using the AIL and ELE. D/R sub

trimmers on the trimmer panel. The adjust-

ment range is ± 25% of the amount set with

the program keys. A tone will sound at the

neutral (sub trim amount = 0) position of

each sub trimmer.

5) Using the

6) Select the desired ON/OFF Switch for each

D/R function by movinq the cursor to the

[18]

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Futaba FP-9VAP RC Controller. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Futaba. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Futaba FP-9VAP RC Controller in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Futaba RC Controllers
Meer handleidingen voor RC Controllers

Beoordeling

Gerelateerde producten

Handleiding

Futaba FP-5UAP RC Controller

Handleiding

Futaba FP-4FN RC Controller

Handleiding

Futaba FP-8SSAP RC Controller

Handleiding

Futaba 6EXAP RC Controller

Handleiding

Futaba FP-8JN RC Controller

Handleiding

Futaba 10CHG RC Controller

Handleiding

Futaba FP-7G RC Controller

Handleiding

Futaba 12K RC Controller

Gerelateerde categorieën