Home > Zakelijke goederen > Lamineermachines > GBC Lamineermachines > GBC HeatSeal H65 Lamineermachine

Handleiding GBC HeatSeal H65 Lamineermachine

Handleiding voor je GBC HeatSeal H65 Lamineermachine nodig? Hieronder kun je de handleiding gratis bekijken en downloaden als PDF in het Nederlands en/of Engels. Dit product heeft 0 veelgestelde vragen, 0 comments en heeft 0 stemmen. Is dit niet de handleiding die je zoekt, neem dan contact met ons op.

Is je product kapot en biedt de handleiding geen oplossing meer? Dan kun je voor reparatie gratis terecht bij Repair Café.

Handleiding

HeatSeal

™

H65 / H75



Electrical safeguards

• The unit must be connected to a supply voltage corresponding to the

electrical rating shown on the unit.

• Unplug the unit before moving it, or when it is not in use for an

extended period of time.

• Do not operate with a damaged supply cord or plug. Do not alter the

attachment plug. The plug is configured for the appropriate electrical

supply.

• Do not overload electrical outlets beyond their capacity; fire or

electrical shock could result.

• The unit is intended for indoor use only.

• Never push objects through the cabinet slots. Do not spill liquid of

any kind on this product.

• Close supervision is required when this product is used near

children.

Service

• Do not attempt to service or repair the pouch laminator yourself.

Unplug the unit and contact an authorized GBC service

representative for any required repairs.

Cleaning

General safeguards

• Use the unit only for its intended purposes of laminating documents.

• Do not place anything in the throat opening of the laminator other

than pouches/documents.

• Place unit on a secure, stable work area to prevent the unit from

falling and possibly causing personal injury and damage to the unit.

• Follow all warnings and instructions marked on the unit.

• The socket outlet shall be installed near the equipment and shall be

easily accessible.

Safety instructions

YOUR SAFETY AS WELL AS THE SAFETY OF OTHERS IS IMPORTANT

TO GBC. IN THIS INSTRUCTION MANUAL AND ON THE PRODUCT ARE

IMPORTANT SAFETY MESSAGES. READ THESE MESSAGES CAREFULLY.

THE FOLLOWING WARNING IS FOUND ON THE BOTTOM OF THE

PRODUCT.

This safety message means that you could be seriously hurt or killed if

you open the product and expose yourself to hazardous voltage.

The following ISO and IEC symbols appear on this product, and their

meaning is as follows:

Electrical shock hazard.

Do not open. No user

servicable parts inside.

Refer servicing to qualified

service personnel.

WARNING

Caution: Unplug this product before cleaning.



THE SAFETY ALERT SYMBOL PRECEDES EACH SAFETY

MESSAGE IN THIS INSTRUCTION MANUAL.

THIS SYMBOL INDICATES A POTENTIAL PERSONAL

SAFETY HAZARD THAT COULD HURT YOU OR OTHERS,

AS WELL AS CAUSE PRODUCT DAMAGE OR PROPERTY

DAMAGE.



WARNING: FOR YOUR PROTECTION DO NOT CONNECT

THE POUCH LAMINATOR TO ELECTRICAL POWER UNTIL

YOU READ THESE INSTRUCTIONS COMPLETELY. KEEP

THESE INSTRUCTIONS IN A CONVENIENT LOCATION

FOR FUTURE REFERENCE. TO GUARD AGAINST INJURY,

THE FOLLOWING BASIC SAFETY PRECAUTIONS MUST

BE OBSERVED IN THE SET-UP AND USE OF THIS

PRODUCT.







Important safeguards



• Wipe exterior only with a damp cloth. Do not use detergents or

solvents.

Special notice

Thank you, for your recent purchase of a GBC Pouch Laminator.

Your new laminator may emit a slight odour during the initial stage

of operation. It is normal and will diminish after several hours of

operation.

Off

Ready

Std. Paper

Photo Paper

Guarantee

Operation of this machine is guaranteed for two years from date of

purchase, subject to normal use. Within the guarantee period, GBC will

at its own discretion either repair or replace the defective machine free

of charge. Defects due to misuse or use for inappropriate purposes are

not covered under the guarantee. Proof of date of purchase will be

required. Repairs or alterations made by persons not authorised by

GBC will invalidate the guarantee. It is our aim to ensure that our

products perform to the specifications stated. This guarantee does not

affect the legal rights which consumers have under applicable national

legislation governing the sale of goods.

2b1

6 87

Off

Operating instructions

Specifications

Electrical

Machine Dimensions

Machine Weight

Maximum Pouch Width

Maximum Pouch Thickness

Maximum Thru-put Thickness

Warm-Up Time

(2 x 75 mic.)

GBC HeatSeal H65

230v / 50 Hz / 0.65 Amps / 150 W

362 x 108 x 102mm

2.5 kg

241mm

2 x 125 mic (Total 250)

0.8mm

8 minutes

Connect power cord to appropriate power source.

GBC Heatseal H65/H75 Laminator is designed for 2 x 75 micron

(total 150) up to 2 x 125 micron (total 250) pouches.

Choose the right setting (fig. 1).

The laminator has 2 temperature settings positioned on the front:

‘Std. Paper’– when laminating with Standard paper

(less than 200 g per sq. metre)

‘Photo paper’– when laminating with Photo paper

(more than 200 g per sq. metre)

Push the switch located on the right side to “On” (I) (fig. 2a). The

red “Power” indicator lamp will illuminate (fig. 2b).

The “Ready” indicator lamp will glow green when the laminator

reaches lamination temperature (fig. 3).

Note: It is normal for the Ready Light to cycle On and OFF after

initial warm up. You can continue laminating.

Position the paper to be laminated into a GBC laminating pouch,

so that the document is aligned to the folded edge and right and

left borders are equal (fig. 4).

Insert the pouch and its content straight into the machine,

leading

with the folded edge

(fig. 5).

The laminated item will automatically exit at the rear of the pouch

laminator (fig. 6). Immediately after the pouch has stopped moving,

place it on a flat surface to cool for one minute before handling.

If you have finished laminating, then move the switch to the "off"

(0) position (fig. 7).

Do not laminate an empty pouch.

To correct misfeeds, press and hold the release button

(fig. 8), located at the back of the machine, while pulling

the misfed material out of the laminator.

Helpful laminating hints

As soon as the lamination is completed, remove from the rear of

the machine and place on a cool flat surface for cooling to prevent

the pouch from curling.

If the laminated item appears to be cloudy, it means that the

laminator temperature is not hot enough. Allow the laminator to

heat for a few more minutes then run the pouch through again.

If the laminated item is wavy, the laminator is too hot. Verify

temperature selector is set at the appropriate temperature.

Do not attempt to do single sided lamination. This will destroy the

laminator.

Do not block the vent slots, this will cause the laminator to

overheat.

Before laminating important or unique documents always run a test

pouch through the laminator using a similar type document.

GBC HeatSeal H75

230v / 50 Hz / 0.87Amps / 200 W

451 x 108 x 102mm

3.0 kg

318mm

2 x 125 mic (Total 250)

0.8mm

8 minutes

Standard Paper

( < 200 g/m

)

Photo Paper

( > 200 g/m

)

If the laminated item appears to be cloudy,

choose the setting

If the laminated item is wavy, choose the setting

Min Max

2 x 75 mic. 2 x 125 mic.

(Total 150) (Total 250)

Photo Paper

Std. Paper

Photo Paper

Std. Paper

Min Max

2 x 75 mic. 2 x 125 mic.

(Total 150) (Total 250)



Beoordeling

Laat ons weten wat je van de GBC HeatSeal H65 Lamineermachine vindt door een beoordeling achter te laten. Wil je je ervaringen met dit product delen of een vraag stellen? Laat dan een bericht achter onderaan de pagina.

Bent u tevreden over de GBC HeatSeal H65 Lamineermachine?
Ja Nee

Beoordeel dit product als eerste

0 stemmen

Praat mee over dit product

Laat hier weten wat jij vindt van de GBC HeatSeal H65 Lamineermachine. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je GBC HeatSeal H65 Lamineermachine. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met GBC. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van GBC HeatSeal H65 Lamineermachine in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.