Handleiding Glamox 62169 Thermostaat

Handleiding

Adax AS - Norway

When putting Digital DT into

operation or after a lengthy

power cut, the display will

flash, showing that no

temperature reduction

programme is active.

Press “F” to reset and DT

will revert to the default

settings: 22°C for normal

temperature and 15°C for

reduced temperature. The

duration of temperature

reduction is 7 hours at night

and 5 hours during the day.

Temperature reduction is

not activated.

First time use and after power cuts

of over 60 minutes

print # 62169 Uk

31012005

Select the normal

temperature setting

Choose the

desired normal

temperature

by pressing

or .

Set the correct day of the week

Set the correct week-

day by pressing ”F”

until ”d” (d=day) is

shown in the display.

Press or until the

appropriate figure is

displayed.

Monday = 1, tues-

day = 2 etc. Store the

setting by pressing

”F”, or allow it to be

stored automatically

after approx. 30

seconds.

Start Night Time temperature reduction

At the time you wish

temperature reduction to

start, press ”7” until 15ºC

is displayed. The lamp

over ”7” will now flash

slowly to indicate that

temperature reduction is

active. The temperature

is lowered to 15ºC for the

next 7 hours. This will

now be repeated at the

same time every night.

Start daytime temperature reduction

What do flashing lights

and steady lights over

7 and 5 indicate?

Slow flashing shows that a

temperature reduction period, ”7”

or ”5” is ongoing. At the same

time the display will show the

temperature setting. A steady light

over ”7” eller ”5” shows that DT

is programmed for temperature

reduction, but that it is not

currently in an active period.

Change the temperature

reduction setting

Hold down on ”F”

and press 3 times

on ”7” eller ”5”

depending on which

you wish to change.

When ”ºC” flashes

in the display,

release ”F”. Press

or to choose

your desired

temperature. You

can select different

daytime and night

time settings.

Alter the duration of temperature

reduction

Hold down on ”F”

and press twice

on ”7” or ”5”

depending on

which you wish

to alter. When ”h”

(hour) flashes

in the display,

release ”F”.

Press or to

choose the

number of hours

you wish

temperature

reduction to last.

Hold down on ”F” and

press once on ”7” or ”5”

to override the current

active period, or the

next period of

temperature reduction.

The lamp is lit steadily

for the period in

question. Temperature

reduction will resume

as usual from the

following period.

Annul a period of temperature

reduction

Delete a period of

temperature reduction

Press ”7”

or ”5” until

the green

lamp goes

out.

18°C

= 2°C deviation

(24 hours)

Calibration

Should the actual room temperature and the

DT’s setting not correspond, DT should be

calibrated. First, let the heater work steadily

at the same temperature setting, preferably

for at least 24 hours, keeping doors and

windows closed. This makes sure that the

DT is controlling room temperature. Sudden,

big changes in outdoor temperature will affect

calibration, making it less precise.

Press “F” until “d” is displayed.

Release ”F” for a moment - then

press it once more. ºC will be

displayed and then the setting for

normal temperature. Press

or

until the display shows the same as

the actual measured room

temperature. Store by pressing

“F” or let the new setting be

automatically stored after approx.

30 seconds.

The heater will now work with

the temperature displayed by DT

matching the actual temperature

attained in the room.

20°C

20°C 20°C

Digital thermostat

Produced by

At the time you wish

temperature reduction to

start, press “5” until 15ºC

is displayed. The lamp

over “5” will now flash

slowly to indicate that

temperature reduction is

active. The temperature

is lowered to 15ºC for the

next 5 hours. This will now

be repeated at the same

time from Monday to

Friday, leaving Saturday

and Sunday unaffected.

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Glamox 62169 Thermostaat. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Glamox. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Glamox 62169 Thermostaat in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Glamox Thermostaten
Meer handleidingen voor Thermostaten

Veelgestelde vragen over Glamox 62169 Thermostaat

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Fantini Cosmi CH140GSM Thermostaat

Handleiding

Eberle RTR-S 6731-1 Thermostaat

Handleiding

Honeywell RTH2300B1038/E1 Thermostaat

Handleiding

Hager EK370 Thermostaat

Handleiding

Fenix TFT-2 Thermostaat

Handleiding

Grässlin Chronostat 700 Thermostaat

Handleiding

Danfoss RET 2000B Thermostaat

Handleiding

Honeywell RCHT9510WFW2001/W Thermostaat

Gerelateerde categorieën